Engineering topics

Hancock, David W., III

Publications and source records attributed to Hancock, David W., III.

15 records

NASA NTRS2012

The Algorithm Theoretical Basis Document for Level 1A Processing

The first process of the Geoscience Laser Altimeter System (GLAS) Science Algorithm Software converts the Level 0 data into the Level 1A Data Products. The Level 1A Data Products are the time ordered instrument data converted from counts to engineering units. This document defines the equations that convert the raw instrument data into engineering units. Required scale factors, bias values, and coefficients are defined in this document. Additionally, required quality assurance and browse products are defined in this document.

Jester, Peggy L.↗

NASA NTRS2006

TOPEX Radar Altimeter Engineering Assessment Report Final Update-Side B Turn-On to End-of-Mission on October 9, 2005

This is the thirteenth and final report in a series of TOPEX Radar Altimeter Engineering Assessment Reports. The initial TOPEX Radar Altimeter Engineering Assessment Report, in February 1994, presented performance results for the NASA Radar Altimeter on the TOPEX/POSEIDON spacecraft, from its launch in August 1992 to February 1994. Since the time of that initial report and prior to this report, there have been eleven interim supplemental Engineering Assessment Reports, issued in March 1995, May 1996, March 1997, June 1998, August 1999, September 2000, June 2001, March 2002, May 2003, April 2004 and September 2005. The sixth supplement in September 2000 was the first assessment report that addressed Side B performance, and presented the altimeter performance from Side B turn-on until the end of calendar year 1999. This report extends the performance assessment of Side B to the final collection of data on October 9, 2005, and includes the performance assessment of Jason-1, the TOPEX follow-on mission, launched on December 7, 2001. This report provides some comparisons of Side A and Side B performance.

Lockwood, Dennis W.↗

NASA NTRS2004

TOPEX Radar Altimeter Engineering Assessment Report Update: Side B Turn-On to January 1, 2004

This is the eleventh in a series of TOPEX Radar Engineering Assessment Reports, The initial TOPEX Radar Altimeter Engineering Assessment Report, in February 1994, presented performance results for the NASA Radar Altimeter on the TOPEX/POSEIDON spacecraft, from the time of its launch in August 1992 to February 1994. Since the time of that initial report and prior to this report, there have been nine interim supplemental Engineering Assessment Reports, issued in March 1995, May 1996, March 1997, June 1998, August 1999, September 2000, June 2001, March 2002 and again in May 2003.The sixth supplement in September 2000 was the first assessment report that addressed Side B performance, and presented the altimeter performance from the turn-on of Side B until the end of calendar year 1999. This report extends the performance assessment of Side B to the end of calendar year 2003 and includes the performance assessment of Jason-1, the TOPEX follow-on mission, launched on December 7, 2001.

Hancock, David W., III↗

NASA NTRS2003

TOPEX NASA Altimeter Operations Handbook, September 1992

This operations handbook identifies the commands for the NASA radar altimeter for the TOPEX/Poseidon spacecraft, defines the functions of these commands, and provides supplemental reference material for use by the altimeter operations personnel. The main emphasis of this document is placed on command types, command definitions, command sequences, and operational constraints. Additional document sections describe uploadable altimeter operating parameters, the telemetry stream data contents (for both the science and the engineering data), the Missions Operations System displays, and the spacecraft and altimeter health monitors.

Hancock, David W., III↗

NASA NTRS2003

Topography Experiment (TOPEX) Software Document Series Volume 7: TOPEX Mission Radar Altimeter Engineering Assessment Report, February 1994

This document describes the GSFC/WFF analysis of the on-orbit engineering data from the TOPEX radar altimeter, to establish altimeter performance. In accordance with Project guidelines, neither surface truth nor precision orbital data are used for the engineering assessment of the altimeter. The use of such data would imply not only a more intensive and complete performance evaluation, but also a calibration. Such evaluations and.calibrations are outside the scope of this document and will be presented in a separate Verification Report.

Hancock, David W., III↗

NASA NTRS2003

TOPEX Software Document Series: Rev. 1 - Volume 5

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Geophysical Data Record (GDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Lee, Jeffrey↗

NASA NTRS2002

GFO Altimeter Engineering Assessment Report

The U.S. Navy's Geosat Follow-On (GFO) Mission, launched on February 20, 1998, is one of a series of altimetric satellites which include Seasat, Geosat, ERS-1, and TOPEX/POSEIDON (T/P). The purpose of this report is to document the GFO altimeter performance determined from the analyses and results performed by NASA's GSFC and Wallops altimeter, calibration team. It is the second of an anticipated series of NASA's GSFC and Wallops GFO performance documents, each of which will update assessment results. This report covers the performance from instrument acceptance by the Navy on November 29, 2000, to the end of Cycle 20 on November 21, 2001. Data derived from GFO will lead to improvements in the knowledge of ocean circulation, ice sheet topography, and climate change. In order to capture the maximum amount of information from the GFO data, accurate altimeter calibrations are required for the civilian data set which NOAA will produce. Wallops Flight Facility has provided similar products for the Geosat and T/P missions and is doing the same for GFO.

Lockwood, Dennis W.↗

NASA NTRS2002

GEOSAT Follow-on (GFO) Altimeter Document Series: GFO Altimeter Engineering Assessment Report, Version 1 - Volume 3

Hancock, David W., III↗

NASA NTRS2001

GEOSAT Follow-on (GFO) Altimeter Document Series: GFO Altimeter Engineering Assessment Report: From Launch to Acceptance, 10 February 1998 to 29 November 2000 - Volume 1

The US Navy's Geosat Follow-On (GFO) Mission, launched on February 10, 1998, is the latest in a series of altimetric satellites which include Seasat, Geosat, ERS-1, and TOPEX/POSEIDON (T/P). The purpose of this report is to document the GFO altimeter performance determined from the analyses and results performed by the NASA/GSFC/Wallops altimeter calibration team. It is the first of an anticipated series of NASA/GSFC/Wallops' GFO performance documents, each of which will update assessment results. This report covers the performance from launch to instrument acceptance by the Navy on November 29, 2000. Data derived from GFO will lead to improvements in the knowledge of ocean circulation, ice sheet topography, and climate change. In order to capture the maximum amount of information from the GFO data, accurate altimeter calibrations are required for the civilian data set which NOAA will produce. Wallops Flight Facility has provided similar products for the Geosat and T/P missions and is doing the same for GFO.

Hancock, David W., III↗

NASA NTRS1999

ICESat (GLAS) Science Processing Software Document Series: Science Data Management Plan - Volume 2

This document provides the Data Management Plan for the GLAS Standard Data Software (SDS) supporting the GLAS instrument of the EOS ICESat Spacecraft. The SDS encompasses the ICESat Science Investigator-led Processing System (I-SIPS) Software and the Instrument Support Facility (ISF) Software. This Plan addresses the identification, authority, and description of the interface nodes associated with the GLAS Standard Data Products and the GLAS Ancillary Data.

Jester, Peggy L.↗

NASA NTRS1999

ICESat (GLAS) Science Processing Software Document Series: Science Software Management Plan - Volume 1

This document provides the Software Management Plan for the GLAS Standard Data Software (SDS) supporting the GLAS instrument of the EOS ICESat Spacecraft. The SDS encompasses the ICESat Science Investigator-led Processing System (I-SIPS) Software and the Instrument Support Terminal (IST) Software. For the I-SIPS Software, the SDS will produce Level 0, Level 1, and Level 2 data products as well as the associated product quality assessments and descriptive information. For the IST Software, the SDS will accommodate the GLAS instrument support areas of engineering status, command, performance assessment, and instrument health status.

Hancock, David W., III↗

NASA NTRS1990

Effects of height acceleration on Geosat heights

A radar altimeter tracking loop, such as that utilized by Geosat, produces height errors in the presence of persistent height acceleration h(a). The correction factor for the height error is a function of both the loop feedback parameters and the height acceleration. The correction, in meters, to the sea-surface height (SSH) derived from Geosat is -0.16 h(a), where h(a) is in m/sec per sec. The errors induced by accelerations are produced primarily by changes in along-track geoid slopes. The nearly circular Geosat orbit and dynamic ocean topography produce small h(a) values. One area studied in detail encompasses the Marianas Trench and the Challenger Deep in the west central Pacific Ocean. Histograms of SSH corrections due to range accelerations have also been determined from 24-hour segments of Geosat global data. The findings are that 20 percent of the Geosat measurements have acceleration-induced errors of 2 cm or more, while 8 percent have errors of 3 cm or more.

Hancock, David W., III↗

NASA NTRS1990

Effects of islands in the Geosat footprint

The presence of land within a radar altimeter's footprint may contaminate its tracking performance and perturb the nadir oceanographic signal. A study has been performed which examines the effects of small mid-ocean islands on the Geosat tracker. The surface return waveforms, as well as the altimeter measurements, have been analyzed. Open-ocean waveforms have been compared with waveforms containing land reflections; they differ perceptibly. Computations could be performed, based on a combination of waveform data, altimeter signal strength, and sea surface heights, to detect contaminated sea-surface height values for subsequent editing.

Brooks, Ronald L.↗

NASA NTRS1987

Waveform analysis for Geosat day 96

A detailed model waveform function has been least-squares-fitted to 10-second averages of waveform sampler data from selected over-ocean portions of day 96 of the Geosat mission. The results confirm that the height corrections already applied in the routine Geosat data processing are generally good to well within 10 centimeters. Additional height corrections are provided that can refine height estimates to within the several-centimeter level.

Hayne, George S.↗

NASA NTRS1987

Wave-measurement capabilities of the surface contour radar and the airborne oceanographic lidar

The 36-gigahertz surface contour radar and the airborne oceanographic lidar were used in the SIR-B underflight mission off the coast of Chile in October 1984. The two systems and some of their wave-measurement capabilities are described. The surface contour radar can determine the directional wave spectrum and eliminate the 180-degree ambiguity in wave propagation direction that is inherent in some other techniques such as stereophotography and the radar ocean wave spectrometer. The Airborne Oceanographic Lidar can acquire profile data on the waves and produce a spectrum that is close to the nondirectional ocean-wave spectrum for ground tracks parallel to the wave propagation direction.

Walsh, Edward J.↗