Engineering Papers⌕ Search

Engineering topics

Han, X. F.

Publications and source records attributed to Han, X. F..

Skyrmion-Based Programmable Logic Device with Complete Boolean Logic Functions

A skyrmionic programmable logic device (SkrPLD) with complete Boolean logic functions is proposed and analyzed by micromagnetic simulations. The SkrPLD is based on an antiferromagnet/ferromagnet bilayer structure, in which the antiferromagnetic layer supports the interfacial Dzyaloshinskii–Moriya interaction and the out-of-plane exchange bias field for stabilizing a zero-field skyrmion. By varying the local exchange bias field, artificial pinning sites are introduced for trapping the skyrmions. Depending on the input currents and the initial position of skyrmions at different pinning sites, different logic functions can be realized. Micromagnetic simulations show that the proposed SkrPLD has robust performance even under thermal fluctuations and inhomogeneity effects. Our work can provide insights for the design of programmable spin logic devices.

74 ATOMIC AND MOLECULAR PHYSICS↗

Robust Skyrmion Shift Device Through Engineering the Local Exchange-Bias Field

Magnetic skyrmions are topologically protected spin structures, offering great promise as information carriers for future spintronic devices. However, a series of challenges, such as unreliable skyrmion motion, pinning effects, and a weak read-out signal, prevent the development of skyrmionic applications. The recently demonstrated capability to engineer the local exchange-bias field (LEBF) in an exchange biased composite, provides solutions to these challenges. By exploiting LEBF, we design and analyze a robust skyrmion shift device. LEBF-induced magnetic domain walls form the boundary of the device channel, and LEBF potential wells are implemented in the channel for positioning skyrmions. Based on simulations with comprehensive models, we demonstrate the proposed device has the advantages of (i) localizing the skyrmions in the absence of current, (ii) suppressing skyrmion annihilation during transport, (iii) promoting steady skyrmion motion, (iv) enhancing the skyrmion velocity, and (v) magnifying the read-out signal. Our results form the basis for the design of robust skyrmion devices through LEBF engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Results from an improved flowing liquid lithium limiter with increased flow uniformity in high power plasmas in EAST

Significant engineering and physic progress was made by the upgrade of a flowing liquid lithium limiter (FLiLi) inserted into EAST H-mode discharges in 2016. The progress includes an improvement of liquid Li coverage uniformity, no macroscopic surface erosion by plasma materials interaction, effective removal of 55% of the discharge heat flux using high pressure He cooling during ohmic discharges, and the demonstrated ability to restart Li flow for a second experiment performed a week after the first. With increasing Li flow rate, fuel particle recycling and Fe impurity radiation gradually decreased, and plasma performance slightly improved, but there was no impact on the edge tungsten influx. No obvious Li bursts appeared during operation with up to about 4.5 MW auxiliary heating power with peak heat flux reaching ~4 MW m –2 on FLiLi. In addition, a gradual mitigation of edge localized mode (ELM) activity was observed with FLiLi operation. Lastly, short-lived ELM-free phases were observed for the first time in EAST during FLiLi insertion, with increasing τ E and transient H 98(y, 2) < 2.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of spin relaxation times in heavy metals via second-harmonic spin injection magnetoresistance

In tunnel junctions between ferromagnets and heavy elements with strong spin orbit coupling the magnetoresistance is usually dominated by tunneling anisotropic magnetoresistance (TAMR). This makes conventional DC spin injection techniques impractical for determining the spin relaxation time τ s . Here, we show that this obstacle for measurements of τ s can be overcome by second-harmonic spin-injection magnetoresistance (SIMR). In the second-harmonic signal the SIMR is comparable in magnitude to TAMR, thus enabling Hanle-induced SIMR as a powerful tool to directly determine τ s . Using this approach we determined the spin relaxation time of Pt and Ta and their temperature dependences. In conclusion, the spin relaxation in Pt seems to be governed by the Elliott-Yafet mechanism due to a constant resistivity × spin relaxation time product over a wide temperature range.

36 MATERIALS SCIENCE↗

Electrical spin injection into GaAs based light emitting diodes using perpendicular magnetic tunnel junction-type spin injector

Remanent electrical spin injection into an InGaAs/GaAs based quantum well light emitting diode is realized by using a perpendicularly magnetized MgO/CoFeB/Ta/CoFeB/MgO spin injector. We demonstrate that the Ta interlayer plays an important role to establish the perpendicular magnetic anisotropy and the thickness of Ta interlayer determines the type of exchange coupling between the two adjacent CoFeB layers. They are ferromagnetically or antiferromagnetically coupled for a Ta thickness of 0.5 nm or 0.75 nm, respectively. A circular polarized electroluminescence (P{sub c}) of about 10% is obtained at low temperature and at zero magnetic field. The direction of the electrically injected spins is determined only by the orientation of the magnetization of the bottom CoFeB layer which is adjacent to the MgO/GaAs interface. This work proves the critical role of the bottom CoFeB/MgO interface on the spin-injection and paves the way for the electrical control of spin injection via magnetic tunnel junction-type spin injector.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Double-pinned magnetic tunnel junction sensors with spin-valve-like sensing layers

MgO magnetic tunnel junction (MTJ) sensors with spin-valve-like sensing layers of Ir{sub 22}Mn{sub 78} (6)/Ni{sub 80}Fe{sub 20} (t{sub NiFe} = 20–70)/Ru (0.9)/Co{sub 40}Fe{sub 40}B{sub 20} (3) (unit: nm) have been fabricated. A linear field dependence of magnetoresistance for these MTJ sensors was obtained by carrying out a two-step field annealing process. The sensitivity and linear field range can be tuned by varying the thickness of NiFe layer and annealing temperature, and a high sensitivity of 37%/mT has been achieved in the MTJ sensors with 70 nm NiFe at the optimum annealing temperature of 230 °C. Combining the spin-valve-like sensing structure and a soft magnetic NiFe layer, MTJ sensors with relatively wide field sensing range have been achieved and could be promising for showing high sensitivity magnetic field sensing applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of interfacial structures on spin dependent tunneling in epitaxial L1{sub 0}-FePt/MgO/FePt perpendicular magnetic tunnel junctions

Epitaxial FePt(001)/MgO/FePt magnetic tunnel junctions with L1{sub 0}-FePt electrodes showing perpendicular magnetic anisotropy were fabricated by molecular beam epitaxial growth. Tunnel magnetoresistance ratios of 21% and 53% were obtained at 300 K and 10 K, respectively. Our previous work, based on transmission electron microscopy, confirmed a semi-coherent interfacial structure with atomic steps (Kohn et al., APL 102, 062403 (2013)). Here, we show by x-ray photoemission spectroscopy and first-principles calculation that the bottom FePt/MgO interface is either Pt-terminated for regular growth or when an Fe layer is inserted at the interface, it is chemically bonded to O. Both these structures have a dominant role in spin dependent tunneling across the MgO barrier resulting in a decrease of the tunneling magnetoresistance ratio compared with previous predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low frequency noise peak near magnon emission energy in magnetic tunnel junctions

We report on the low frequency (LF) noise measurements in magnetic tunnel junctions (MTJs) below 4 K and at low bias, where the transport is strongly affected by scattering with magnons emitted by hot tunnelling electrons, as thermal activation of magnons from the environment is suppressed. For both CoFeB/MgO/CoFeB and CoFeB/AlO{sub x}/CoFeB MTJs, enhanced LF noise is observed at bias voltage around magnon emission energy, forming a peak in the bias dependence of noise power spectra density, independent of magnetic configurations. The noise peak is much higher and broader for unannealed AlO{sub x}-based MTJ, and besides Lorentzian shape noise spectra in the frequency domain, random telegraph noise (RTN) is visible in the time traces. During repeated measurements the noise peak reduces and the RTN becomes difficult to resolve, suggesting defects being annealed. The Lorentzian shape noise spectra can be fitted with bias-dependent activation of RTN, with the attempt frequency in the MHz range, consistent with magnon dynamics. These findings suggest magnon-assisted activation of defects as the origin of the enhanced LF noise.

36 MATERIALS SCIENCE↗

Controlling spin-dependent tunneling by bandgap tuning in epitaxial rocksalt MgZnO films

Widespread application of magnetic tunnel junctions (MTJs) for information storage has so far been limited by the complicated interplay between tunnel magnetoresistance (TMR) ratio and the product of resistance and junction area (RA). An intricate connection exists between TMR ratio, RA value and the bandgap and crystal structure of the barrier, a connection that must be unravelled to optimise device performance and enable further applications to be developed. In this paper, we demonstrate a novel method to tailor the bandgap of an ultrathin, epitaxial Zn-doped MgO tunnel barrier with rocksalt structure. This structure is attractive due to its good Δ 1 spin filtering effect, and we show that MTJs based on tunable MgZnO barriers allow effective balancing of TMR ratio and RA value. Finally, in this way spin-dependent transport properties can be controlled, a key challenge for the development of spintronic devices.

36 MATERIALS SCIENCE↗

Preparation of a heteroepitaxial La{sub x}Sr{sub y}Mn{sub z}O{sub 3}/BiFeO{sub 3} bilayer by r.f. magnetron sputtering with various oxygen gas flow ratios

BiFeO{sub 3} (BFO) and La{sub x}Sr{sub y}Mn{sub z}O{sub 3} (LSMO) films were epitaxially grown on SrTiO{sub 3} (100) substrates by r.f. magnetron sputtering with various oxygen gas flow ratios (F{sub O2}). Compositional ratios of each atom in both of BFO and LSMO could be controlled kept to around 10 at.% by changing F{sub O2}. Adjusting the compositional ratio to La{sub 0.35}Sr{sub 0.15}Mn{sub 0.5}O{sub 3} not only increase T{sub c} of LSMO but also produces sufficient oxygen to form a perovskite lattice. For an LSMO/BFO heterostructure, detailed observation by cross sectional transmission electron microscopy (TEM) revealed that the lattice of rhombohedral (SG: R-3c) LSMO was shrank by a clamping effect from the SrTiO{sub 3} substrates, and then the BFO was grown in two layers: (i) an interfacial BFO layer (7 nm thick) with evenly shrunk a-axis and c-axis, and (ii) an upper BFO layer (25 nm thick) expanded along the c-axis. Neither misfit strain nor dislocations appeared at the interface between the shrunken BFO and LSMO layers, and these heterostructures did not show exchange bias. These results suggest that BFO is suitable for a tunneling barrier combine with LSMO electrode.

36 MATERIALS SCIENCE↗

Electrical spin injection into InGaAs/GaAs quantum wells: A comparison between MgO tunnel barriers grown by sputtering and molecular beam epitaxy methods

An efficient electrical spin injection into an InGaAs/GaAs quantum well light emitting diode is demonstrated thanks to a CoFeB/MgO spin injector. The textured MgO tunnel barrier is fabricated by two different techniques: sputtering and molecular beam epitaxy. The maximal spin injection efficiency is comparable for both methods. Additionally, the effect of annealing is also investigated for the two types of samples. Both samples show the same trend: an increase of the electroluminescence circular polarization (P{sub c}) with the increase of annealing temperature, followed by a saturation of P{sub c} beyond 350 °C annealing. Since the increase of P{sub c} starts well below the crystallization temperature of the full CoFeB bulk layer, this trend could be mainly due to an improvement of chemical structure at the top CoFeB/MgO interface. This study reveals that the control of CoFeB/MgO interface is essential for an optimal spin injection into semiconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of high-speed and wide-angle visible observation diagnostics on Experimental Advanced Superconducting Tokamak using catadioptric optics

A new wide-angle endoscope for visible light observation on the Experimental Advanced Superconducting Tokamak (EAST) has been recently developed. The head section of the optical system is based on a mirror reflection design that is similar to the International Thermonuclear Experimental Reactor-like wide-angle observation diagnostic on the Joint European Torus. However, the optical system design has been simplified and improved. As a result, the global transmittance of the system is as high as 79.6% in the wavelength range from 380 to 780 nm, and the spatial resolution is <5 mm for the full depth of field (4000 mm). The optical system also has a large relative aperture (1:2.4) and can be applied in high-speed camera diagnostics. As an important diagnostic tool, the optical system has been installed on the HT-7 (Hefei Tokamak-7) for its final experimental campaign, and the experiments confirmed that it can be applied to the investigation of transient processes in plasma, such as ELMy eruptions in H-mode, on EAST.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancement of magnetoresistance using CoFe/Ru/CoFe synthetic ferrimagnetic pinned layer in BiFeO{sub 3} based spin-valves

SrTiO{sub 3} (100) sub/BiFeO{sub 3}/CoFe/Ru/CoFe/Cu/CoFe/Ta structure was prepared by a combination of chemical solution deposition and sputtering method, and followed by a systematical investigation for the structural, magnetic and magnetoresistance properties at room temperature (RT) as a function of CoFe and Ru thicknesses. It was revealed that introduction of synthetic CoFe/Ru/CoFe as a pinning layer increased the giant magentoresistance (MR) ratio to 8.3% at RT. This enhancement of MR ratio might be attributed to (i) the increase of pinning field, and (ii) suppression of the influence of the surface roughness of BiFeO{sub 3} by inserting the synthetic CoFe/Ru/CoFe layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical diffusion: Another factor affecting the magnetoresistance ratio in Ta/CoFeB/MgO/CoFeB/Ta magnetic tunnel junction

This letter investigates the microstructure and mean inner potential (MIP) profile of Ta/CoFeB/MgO/CoFeB/Ta magnetic tunnel junctions (MTJs) by high resolution transmission electron microscopy (HRTEM) and electron holography, respectively. The inconspicuous crystallization of MgO barrier is confirmed by HRTEM in the post-annealed sample at 250 Degree-Sign C. An obvious MIP difference is displayed in the Ta layers between the top and bottom of the MTJ, and elemental content difference of them is confirmed by energy dispersive spectroscopy. These results imply that the chemical diffusion can also give rise to a lower tunnel magnetoresistance ratio besides the inconspicuous crystallization of MgO barrier.

36 MATERIALS SCIENCE↗