Engineering topics

Hamilton, Gary

Publications and source records attributed to Hamilton, Gary.

4 records

NASA NTRS2010

UAVSAR Active Electronically-Scanned Array

The Uninhabited Airborne Vehicle Synthetic Aperture Radar (UAVSAR) L-band (1.2-1.3 GHz) repeat pass, interferometric synthetic aperture radar (InSAR) used for Earth science applications. Using complex radar images collected during separate passes on time scales of hours to years, changes in surface topography can be measured. The repeat-pass InSAR technique requires that the radar look angle be approximately the same on successive passes. Due to variations in aircraft attitude between passes, antenna beam steering is required to replicate the radar look angle. This paper describes an active, electronically steered array (AESA) that provides beam steering capability in the antenna azimuth plane. The array contains 24 transmit/receive modules generating 2800 W of radiated power and is capable of pulse-to-pulse beam steering and polarization agility. Designed for high reliability as well as serviceability, all array electronics are contained in single 178cm x 62cm x 12 cm air-cooled panel suitable for operation up 60,000 ft altitude.

Sadowy, Gregory↗

NASA NTRS2006

Ground processing of Cassini RADAR imagery of Titan

This paper describes the ground processing of Cassini SAR data. We focus upon the unusual features of the data and how these features impact the processing. We exhibit a data dependent mechanism we have implemented for eliminating artifacts due to attitude and ephemeris knowledge error. Finally we describe how we trade-off SAR performance vs. area of coverage when we design our spacecraft pointing profiles.

remote sensing↗

NASA NTRS1999

First Results From the GeoSAR Mapping Instrument

Geosynchronous Synthetic Aperture Radar (GeoSAR) is a consortium project consisting of The Jet Propulsion Laboratory (JPL), Calgis (a small GIS company based in Fresno, CA) and the California Department of Conservation with funding provided by Defense Research Projects Agency (DARPA) started in November 1996. The two main objectives of the GeoSAR Program are: 1) To develop a state of the art dual frequency interferometric radar mapping instrument capable of mapping the true ground surface height beneath the vegetation canopy; and 2) To transition this mapping technology to a commercial company, Calgis. JPL, the technical lead, has the following program deliverables at program completion in November 1999 include radar design and radar hardware for X-band (3 cm) and P-band (83 cm) radars, processor software, hardware and documentation, and calibrated X-band radar.

Hensley, Scott↗

NASA NTRS1990

Nonlinearity corrections in calibration of advanced very high resolution radiometer infrared channels

The IR channels of the AVHRR are calibrated in-flight with data acquired when the AVHRR views space and a warm target on board. This determines the two coefficients of a linear calibration equation. However, in its 11- and 12-micron channels the response of the AVHRR is nonlinear. If not accounted for, the nonlinearity could cause errors as large as 2 C in inferred scene temperatures. Therefore NESDIS computes corrections to the brightness temperatures inferred from the linear calibration. This paper describes how the corrections have been calculated at NESDIS since March 1986 and presents the corrections for the AVHRRs on the NOAA 9, 10, and 11 satellites. The corrections are calculated from results of the prelaunch calibration.

Weinreb, Michael P.↗