Engineering Papers⌕ Search

Engineering topics

Halsell, C. Allen

Publications and source records attributed to Halsell, C. Allen.

13 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

InSight attitude control system thruster characterization and calibration for successful navigation to Mars

In order for the InSight spacecraft to execute a safe Mars landing, it was crucial that the navigation team accurately predict the trajectory and deliver the spacecraft to the targeted atmospheric entry point. One of the primary challenges faced by the Navigation Team was the accurate reconstruction and prediction of small but frequent velocity changes imparted by the spacecraft’s Attitude Control System thrusters. This paper discusses the in-flight thruster calibration campaign, the reconstruction and prediction of accelerations throughout various phases of cruise (including compensating for significant outgassing after launch and attitude transition), and the subsequent impact on atmospheric entry point delivery

McCandless, Sarah Elizabeth↗
NASA NTRS2019

Maneuver design overview of the 2018 InSight Mars lander mission

Launched on May 5, 2018, the Interior Exploration using Seismic Investigations, Geodesy, and Heat Transport (InSight) spacecraft landed safely on Mars on November 26, 2018. To deliver the lander accurately to the landing site, six trajectory correction maneuvers (TCMs) were planned along the reference trajectory from Earth launch to Mars entry. For the last two TCMs, there were two corresponding contingency TCMs planned that could be executed in the event that the corresponding nominal one failed. There were also twenty pre-designed menu TCMs available for execution at the time of the last contingency TCM, about 8 hours before the Mars entry, descent, and landing. This navigation paper overviews the maneuver design of each TCM, as well as how each one actually performed during operations.

Wallace, Mark↗
NASA NTRS2019

InSight orbit determination

The InSight mission relied on accurate deep-space navigation for a successful Mars landing on November 26, 2018. In this paper, we discuss the role of the cruise Orbit Determination team, whose responsibilities included determining the spacecraft state, predicting the future trajectory, and quantifying the uncertainty associated with those estimates. In particular, we will focus on spacecraft dynamic modeling, small forces due to attitude control, radiometric tracking data, filter strategies, uncertainty quantification, and responses to unexpected flight situations. We will also provide analysis of reconstructed maneuvers, small forces, and delivery accuracy at Mars arrival.

Seubert, Jill↗
NASA NTRS2011

EPOXI Trajectory and Maneuver Analyses

The EPOXI mission is a NASA Discovery Mission of Opportunity combining two separate investigations: Extrasolar Planet Observation and Characterization (EPOCh) and Deep Impact eXtended Investigation (DIXI). Both investigations reused the DI instruments and spacecraft that successfully flew by the comet Tempel-1 (4 July 2005). For EPOCh, the goal was to find exoplanets with the high resolution imager, while for DIXI it was to fly by the comet Hartley 2 (4 Nov 2010). This paper documents the navigation experience of the earlier ma-neuver analyses critical for the EPOXI mission including statistical ?V analyses and other useful analyses in designing maneuvers. It also recounts the trajectory design leading up to the final reference trajectory to Hartley 2.

trajectory design↗
NASA NTRS2011

Navigating Stardust-NEXT: The Road to Tempel 1

The Stardust-NExT (New Exploration of Tempel) mission, a follow-on to the Stardust prime mission, successfully completed a flyby of comet Tempel-1 on 2/14/11. However there were many challenges along the way in navigating this mission to its successful conclusion, most significantly low propellant margin and detection of the comet in imagery later than anticipated. These challenges and their ramifications forced the navigation team and the project to respond with flexibility and ingenuity. As a result, the resulting flyby at an altitude of 178 km was nearly flawless, accomplishing all its science objectives.

flyby↗
NASA NTRS2008

Mars Reconnaissance Orbiter Aerobraking Navigation Operation

After a seven-month interplanetary cruise, the Mars Reconnaissance Orbiter arrived at Mars and executed a 1.0 km/s Mars Orbit Insertion (MOI) maneuver. The post-MOI orbit was highly elliptical with a 35 hour, 428 km x 45000 km altitude orbit. To establish a useful science orbit, the navigation team used an aerobraking technique to guide the spacecraft into a 2-hour, 255 km x 320 km altitude orbit. This paper details the aerobraking navigation operation strategy and flight results. It also describes the aerobraking key requirements and navigation challenges.

Long, Stacia M.↗
NASA NTRS2007

Mars Reconnaissance Orbiter Aerobraking Daily Operations and Collision Avoidance

The Mars Reconnaissance Orbiter reached Mars on March 10, 2006 and performed a Mars orbit insertion maneuver of 1 km/s to enter into a large elliptical orbit. Three weeks later, aerobraking operations began and lasted about five months. Aerobraking utilized the atmospheric drag to reduce the large elliptical orbit into a smaller, near circular orbit. At the time of MRO aerobraking, there were three other operational spacecraft orbiting Mars and the navigation team had to minimize the possibility of a collision. This paper describes the daily operations of the MRO navigation team during this time as well as the collision avoidance strategy development and implementation.

Long, Stacia M.↗
NASA NTRS2004

The Mars Reconnaissance Orbiter Mission Plan

This paper describes the Mars Reconnaissance Orbiter Mission Plan with emphasis on major mission activities and key challenges in mission design, spacecraft design, and science data acquisition.

Jah, Moriba↗
NASA NTRS2004

The Mars Reconnaissance Orbiter mission plan

This paper describes the Mars Reconnaissance Orbiter Mission Plan with emphasis on major mission activities and key challenges in mission design, spacecraft design, and science data acquisition.

Jah, Moriba↗
NASA NTRS1997

Maneuver design for Galileo Jupiter approach and orbital operations

Following the successful release of the Galileo probe, the navigation efforts were focused on the implementation of the critical Io approach and the Jupiter orbit insertion strategy. The actual in-flight events on the approach phase affected the strategy. The most significant event was the onboard tape recorder anomaly, and it is shown that this anomaly affected the plans and assumptions of the navigation strategy for the approach and orbit insertion. The analysis, constraints, contingency planning and design evolution of trajectory correction maneuvers which enabled the continuation of the mission, are reported on. The Jupiter approach and initial orbit navigation strategy is presented in order to verify the viability of the strategy under nominal circumstances, and future mission operations plans are described.

Wilson, Michael G.↗
NASA NTRS1990

Maneuver analysis for the Mars Observer mission

The Mars Observer mission will study Mars from a low-altitude orbit unlike that of any previous mission. During interplanetary cruise, propulsive maneuvers are required to satisfy limits on the probability of impact with Mars and to ensure capture. After Mars capture, the Observer must be brought to an accurate, near-circular mapping orbit through a series of maneuvers. Propulsive maneuver strategies have been developed to meet these needs. This paper describes the methods used in the analysis, the control capabilities, and the associated expected velocity changes for the mission.

Halsell, C. Allen↗