This paper describes the analysis and design evolution of the Mars Reconnaissance Orbiter trajectory from launch to end-of-mission. The mission uses a combination of propulsive maneuvers and aerobraking techniques to deliver the orbiter to a low-altitude frozen orbit at Mars. The launch/arrival space for the 2005 Earth-Mars opportunity will be described as well as the particular launch strategy chosen for this mission. Details of the aerobraking profile will be provided. Finally, the Primary Science Orbit will be examined, and the trade-offs between science objectives and orbiter capability will be presented.

Mars↗

NASA NTRS2000

Post Galileo-Europa-Mission Satellite Tour Design

The Galileo orbiter mission as originally envisioned would orbit Jupiter eleven times, closely encountering either Europa, Ganymede, or Callisto on ten of those orbits. This nominal or prime mission began with Jupiter orbit insertion on December 7, 1995 and ended as designed ten encounters later on December 1, 1997. An extension to this nominal mission was proposed, developed and accepted in 1997 and was designed to continue orbital operations through an additional two years until December 31, 1999. This follow- on mission, labelled the Galileo Europa Mission, visits Europa eight times, Callisto four times, and ends with two visits to Io. It augments the prime mission by offering many attractive additional opportunities for science, especially remote sensing. The opportunities include increased scrutiny of Europa, a world with a possible global ocean hidden beneath the surface ice-cap, and the first high resolution images of Io (the only major satellite not encountered during the nominal tour). In 1998 a new effort was begun to investigate a possible extension to GEM. Remote sensing observations will continue to be important but moreover, valuable unique in situ fields and particles measurements will be a high priority motivation in the design and selection of any post-GEM tour. A significant design feature of a possible post-GEM tour would be the extension of the mission through the December 2000 timeframe. This would permit the possibility of simultaneous fields and particles experiments coordinated with the Cassini spacecraft as it swings by the Jupiter system for the final gravity assist enroute to Saturn.

Wilson, M. G.↗

NASA NTRS1997

Navigation for the new millennium: Autonomous navigation for Deep Space 1

The autonomous optical navigation system technology for the Deep Space 1 (DS1) mission is reported on. The DS1 navigation system will be the first to use autonomous navigation in deep space. The systems tasks are to: perform interplanetary cruise orbit determination using images of distant asteroids; control and maintain the orbit of the spacecraft with an ion propulsion system and conventional thrusters, and perform late knowledge updates of target position during close flybys in order to facilitate high quality data return from asteroid MaAuliffe and comet West-Kohoutek-Ikemura. To accomplish these tasks, the following functions are required: picture planning; image processing; dynamical modeling and integration; planetary ephemeris and star catalog handling; orbit determination; data filtering and estimation; maneuver estimation, and spacecraft ephemeris updating. These systems and functions are described and preliminary performance data are presented.

Reidel, J. E.↗

NASA NTRS1997

Maneuver Design for Galileo Jupiter Approach and Orbital Operations

Following the successful release of the Galileo Probe in July of 1995, navigation efforts forced on implementing the critical Io approach and Jupiter orbit insertion strategy that had been refined over the previous decade.

Jupiter↗

NASA NTRS1997

Maneuver Design for Galileo Jupiter Approach and Orbital Operations

UNKNOWN

Galileo↗

NASA NTRS1997

Navigation for the New Millennium: Autonomous Navigation for Deep-Space-1

The first flight of NASA's New Millennium Program, Deep Space-1, will include a new navigational technology: a fully autonomous optical navigation system.

New↗

NASA NTRS1995

Designing planetary protection into the Mars observer mission

Planetary protection has been an important consideration during the process of designing the Mars Observer mission. It affected trajectory design of both the interplanetary transfer and the orbits at Mars; these in turn affected the observation strategies developed for the mission. The Project relied mainly on the strategy of collision avoidance to prevent contamination of Mars. Conservative estimates of spacecraft reliability and Martian atmosphere density were used to evaluate decisions concerning the interplanetary trajectory, the orbit insertion phase at Mars, and operations in orbit at Mars and afterwards. Changes in the trajectory design, especially in the orbit insertion phase, required a refinement of those estimates.

Sweetser, T. H.↗

NASA NTRS1991

Mars Observer trajectory and orbit control

The Mars Observer mission will study Mars from a low-altitude orbit. During interplanetary cruise, propulsive maneuvers are required to ensure capture, with a secondary constraint to satisfy limits on the probability of impact with Mars. After capture, the spacecraft will be brought to a near-circular mapping orbit through a series of maneuvers. Mapping orbit maneuvers will be performed in order to follow a predetermined set of ground tracks and to maintain orbit altitude. This will allow accurate spacecraft command sequence generation and aid science planning throughout the mapping phase. Specific orbit control plans for the open and close of the launch period have been developed to meet these needs. This paper describes the control capabilities and the associated expected velocity changes for the mission.

Halsell, C. A.↗