Engineering Papers⌕ Search

Engineering topics

Hall, Christopher

Publications and source records attributed to Hall, Christopher.

21 records · Page 2

The hydrothermal decomposition of calcium monosulfoaluminate 14-hydrate to katoite hydrogarnet and beta-anhydrite: An in-situ synchrotron X-ray diffraction study

We apply in-situ synchrotron X-ray diffraction to study the transformation of calcium monosulfoaluminate 14-hydrate Ca{sub 4}Al{sub 2}O{sub 6}(SO{sub 4}).14H{sub 2}O [monosulfate-14] to hydrogarnet Ca{sub 3}Al{sub 2}(OH){sub 12} on the saturated water vapor pressure curve up to 250 deg. C. We use an aqueous slurry of synthetic ettringite Ca{sub 6}Al{sub 2}(SO{sub 4}){sub 3}(OH){sub 12}.26H{sub 2}O as the starting material; on heating, this decomposes at about 115 deg. C to form monosulfate-14 and bassanite CaSO{sub 4}.0.5H{sub 2}O. Above 170 deg. C monosulfate-14 diffraction peaks slowly diminish in intensity, perhaps as a result of loss of crystallinity and the formation of an X-ray amorphous meta-monosulfate. Hydrogarnet nucleates only at temperatures above 210 deg. C. Bassanite transforms to beta-anhydrite (insoluble anhydrite) at about 230 deg. C and this transformation is accompanied by a second burst of hydrogarnet growth. The transformation pathway is more complex than previously thought. The mapping of the transformation pathway shows the value of rapid in-situ time-resolved synchrotron diffraction. - Graphical abstract: We use in-situ synchrotron diffraction to observe the decomposition of layer compound calcium monosulfoaluminate 14-hydrate (left) to form hydrogarnet (right)and beta-anhydrite under hydrothermal conditions.

36 MATERIALS SCIENCE↗

Integrated Orbit and Attitude Control for a Nanosatellite with Power Constraints

Small satellites tend to be power-limited, so that actuators used to control the orbit and attitude must compete with each other as well as with other subsystems for limited electrical power. The Virginia Tech nanosatellite project, HokieSat, must use its limited power resources to operate pulsed-plasma thrusters for orbit control and magnetic torque coils for attitude control, while also providing power to a GPS receiver, a crosslink transceiver, and other subsystems. The orbit and attitude control strategies were developed independently. The attitude control system is based on an application of Linear Quadratic Regulator (LQR) to an averaged system of equations, whereas the orbit control is based on orbit element feedback. In this paper we describe the strategy for integrating these two control systems and present simulation results to verify the strategy.

Naasz, Bo↗

Metal colloids and semiconductor quantum dots: Linear and nonlinear optical properties

One aspect of this project involves a collaborative effort with the Solid State Division of ORNL. The thrust behind this research is to develop ion implantion for synthesizing novel materials (quantum dots wires and wells, and metal colloids) for applications in all optical switching devices, up conversion, and the synthesis of novel refractory materials. In general the host material is typically a glass such as optical grade silica. The ions of interest are Au, Ag, Cd, Se, In, P, Sb, Ga and As. An emphasis is placed on host guest interactions between the matrix and the implanted ion and how the matrix effects and implantation parameters can be used to obtain designer level optical devices tailored for specific applications. The specific materials of interest are: CdSe, CdTe, InAs, GaAs, InP, GaP, InSb, GaSb and InGaAs. A second aspect of this research program involves using porous glass (25-200 A) for fabricating materials of finite size. In this part of the program, we are particularly interested in characterizing the thermodynamic and optical properties of these non-composite materials. We also address how phase diagram of the confined material is altered by the interfacial properties between the confined material and the pore wall.

Henderson, D. O.↗