Engineering Papers⌕ Search

Engineering topics

Hahn, Yungsun

Publications and source records attributed to Hahn, Yungsun.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

2018 Mars Insight Trajectory Reconstruction and Performance from Launch Through Landing

The InSight mission successfully launched to Mars on an Atlas V 401 launch vehicle from the Western Test Range (WTR) at Vandenberg Air Force Base (VAFB) at 04:05:00 PDT on May 5th, 2018 and landed in the Elysium Planitia Region on November 26th, 2018. Data confirming nominal touchdown was received at 11:52:59 AM PST. This paper summarizes in detail the actual vs. predicted performance of the InSight spacecraft and all associated assets in terms of launch vehicle events, injection performance, DSN performance, cruise performance, and Entry, Descent, and Landing events.

Abilleira, Fernando↗
NASA NTRS2019

Maneuver design overview of the 2018 InSight Mars lander mission

Launched on May 5, 2018, the Interior Exploration using Seismic Investigations, Geodesy, and Heat Transport (InSight) spacecraft landed safely on Mars on November 26, 2018. To deliver the lander accurately to the landing site, six trajectory correction maneuvers (TCMs) were planned along the reference trajectory from Earth launch to Mars entry. For the last two TCMs, there were two corresponding contingency TCMs planned that could be executed in the event that the corresponding nominal one failed. There were also twenty pre-designed menu TCMs available for execution at the time of the last contingency TCM, about 8 hours before the Mars entry, descent, and landing. This navigation paper overviews the maneuver design of each TCM, as well as how each one actually performed during operations.

Wallace, Mark↗
NASA NTRS2019

Navigation performance of the 2018 InSight Mars Lander mission

The NASA InSight spacecraft was launched successfully from Vandenberg Air Force Base on an Atlas V 401 launch vehicle on May 5, 2018 and landed on November 26, 2018. Accurate targeting to the atmospheric entry point by the Navigation team achieved by carefully controlling the final entry flight path angle to -12.0 degrees with a tolerance of +/- 0.21 degrees. This paper will describe how the InSight Navigation team met this difficult task in the presence of frequent unbalanced thrusting for attitude control. The continuous correction for this unplanned ∆V far exceeded pre-launch expectations and proved a challenge to predict accurately.

Wallace, Mark↗
NASA NTRS2018

2018 Mars Insight Mission Design and Navigation Overview

Originally scheduled for a launch in the 2016 Earth to Mars opportunity, NASA’s Interior Exploration using Seismic Investigations, Geodesy, and Heat Transport (InSight) mission will launch the next lander to Mars in May-June 2018 arriving to the Red Planet in November 2018. Derived from the Phoenix mission which successfully landed on Mars in May 2008, the InSight Entry, Descent, and Landing system will place a lander in the Elysium Planitia region. This paper specifies the mission and navigation requirements set by the Project and how the final mission and navigation design satisfies those requirements.

Abilleira, Fernando↗
NASA NTRS2018

Numerical Challenges in Cassini Maneuver Operations

Launched in 1997 to observe Saturn and its system, Cassini successfully entered Saturn orbit in 2004 and impacted the planet on September 15, 2017 after 22 orbits each skimming over Saturn’s cloud tops. The Cassini mission represents the most complex gravity-assist trajectory ever flown. As such, the Flight Path Control team encountered many difficulties along the way, resulting in a continuously evolving maneuver process. In this paper, we focus on the challenges presented by the well-known singularities in the transfer problem and the unexpected numerical instabilities in state propagations through flybys, maneuver algorithm convergence issues, and orbital element targeting difficulties.

Hahn, Yungsun↗
NASA NTRS2018

Cassini In-Flight Navigation Adaptations

In the nearly two decades of Cassini flight, adaptations to navigation processes were applied as characteristics unique to Cassini were identified and spacecraft configuration changes were implemented. Additionally, operational experience was leveraged into more efficient processes, better modeling, and more robust contingency strategies. Trajectory adjustments were implemented to allow further investigation of surprising science discoveries meriting more attention. Unique analyses were performed to determine how to best accomplish atypical science observations while maintaining acceptable risk levels. Descriptions of the most significant adaptations are organized according to the affected navigation subsystems: trajectory design, orbit determination, optical navigation, and maneuver design.

Wagner, Sean↗
NASA NTRS2018

Flying Cassini Through the Grand Finale Orbits: Prediction vs. Reality

After twenty years of successful mission operations and invaluable scientific discoveries, the Cassini orbiter completed its tour around the Saturnian system on the most complex gravity-assist trajectory ever flown. The end-of-mission target of September 15, 2017 was achieved by preserving propellant at the expense of minimizing maneuver cycles. A navigation a strategy that incorporated orbit trim maneuvers was developed years in advance to maintain position dispersions below 250 km (1σ) at three specific periapses. This paper reports on the actual maneuver performance and overall trajectory control to maintain the Grand Finale orbits, highlighting the differences between predicted and implemented values.

Roth, Duane↗
NASA NTRS2017

Cassini Maneuver Experience Through the Final Targeted Titan Flyby and the Grand Finale

Amassing valuable scientific information about the Saturnian system for 13 years, the Cassini spacecraft is now in the last phase of its mission. The Grand Finale, a series of 22 orbits with Cassini passing through a gap between Saturn’s innermost ring and its upper atmosphere, began after the last targeted Titan flyby on April 22, 2017 and ends with the spacecraft plunging into Saturn on September 15, 2017. This paper reports on the maneuvers performed to achieve the final targeted Titan encounter and the maneuvers used to maintain the Grand Finale orbits.

Wong, Mau C.↗
NASA NTRS2017

A Linear Analysis for the Flight Path Control of the Cassini Grand Finale Orbits

Cassini’s Grand Finale Mission begins after the last targeted Titan flyby on April 22, 2017 and ends with a series of 22 ballistic orbits each passing within a few thousand kilometers of the cloud tops of Saturn, ultimately impacting the planet on September 15, 2017. Despite the ballistic nature of the trajectory, the absence of targeted maneuvers throughout the final orbits causes position uncertainties to grow exponentially with time, posing a significant difficulty for the science sequence planning team. Thus, a strategy that incorporates trajectory correction maneuvers was developed to significantly reduce dispersions from the reference path and maintain dispersions below 250 km (1- ). In this paper, the linear method used to determine the optimal number and location of the maneuvers to control the trajectory, along with the corresponding targets, is detailed. A nonlinear Monte Carlo trajectory dispersion tool served as a testbed to validate the linear analysis results. Based on orbit determination covariance sampling with Monte Carlo simulations, the linear approach allowed the Cassini maneuver analysts to run thousands of maneuver combinations in little time, eventually finding an optimal strategy with three statistical maneuvers ( V99 < 1.5 m/s) to adequately control most of the trajectory.

Vaquero, Mar↗
NASA NTRS2017

What Goes up Must Come Down: Cassini Maneuver Experience During the Inclination-Raising Phase Prior to End of Mission

The Cassini spacecraft is kept on its planned reference trajectory using maneuvers designed by the Cassini Maneuver Team. The experiences of the team are documented for 2016—a span of the mission during which the orbit inclination is steadily increasing. This period contains 33 planned maneuvers and 11 Titan flybys leading up to the final orbits before Cassini’s plunge into Saturn. Information about each maneuver is provided along with discussion of situations where operations deviated from the normal routine.

Laipert, Frank E.↗