Engineering Papers⌕ Search

Engineering topics

Haegel, Nancy M.

Publications and source records attributed to Haegel, Nancy M..

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Defect control strategies for Al 1- x Gd x N alloys

Tetrahedrally bonded III-N and related alloys are useful for a wide range of applications from optoelectronics to dielectric electromechanics. Heterostructural AlN-based alloys offer unique properties for piezoelectrics, ferroelectrics, and other emerging applications. Atomic-scale point defects and impurities can strongly affect the functional properties of materials, and therefore, it is crucial to understand the nature of these defects and the mechanisms through which their concentrations may be controlled in AlN-based alloys. In this study, we employ density functional theory with alloy modeling and point defect calculations to investigate native point defects and unintentional impurities in Al 1-x Gd x N alloys. Among the native defects that introduce deep midgap states, nitrogen vacancies (V N ⁠) are predicted to be in the highest concentration, especially under N-poor growth conditions. We predict and experimentally demonstrate that V N formation can be suppressed in thin films through growth in N-rich environments. We also find that Al 1-x Gd x N alloys are prone to high levels of unintentional O incorporation, which indirectly leads to even higher concentrations of deep defects. Growth under N-rich/reducing conditions is predicted to minimize and partially alleviate the effects of O incorporation. The results of this study provide valuable insights into the defect behavior in wurtzite nitride-based alloys, which can guide their design and optimization for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Photovoltaic device innovation for a solar future

Photovoltaics (PV), also known as solar cells, are now found everywhere - in utility plants; on roofs of homes and commercial buildings; on platforms at sea; in agricultural fields; on vehicles, buildings, drones, and backpacks; and, in their longest running application, providing power in space. Continuous device innovation has led to increased efficiency and improved reliability for multiple PV technologies. Confronted with an urgent need to deploy PV at multiterawatt (TW) scale over the next two decades to mitigate greenhouse gas emissions, PV device innovation takes on new urgency and impact. This perspective reviews recent progress in device design and performance for PV technologies that are currently in commercial production at greater than 1 GW/year or enabling significant space-based power generation - Si, CdTe, CIGS, and multijunction III-V - and looks ahead to the next 5 years. In conclusion, we also identify device-related topics requiring cross-cutting research and innovation.

14 SOLAR ENERGY↗
DOE OSTI2023

Multimodal microscopy of extended defects in β-Ga 2 O 3 (010) EFG crystals

Beta-phase gallium oxide (β-Ga 2 O 3 ) has attracted attention in recent years as a potentially low cost, large area substrate and active layer material for high power, high temperature power electronics and sensing devices. However, growth of β-Ga 2 O 3 crystals is complicated by easily activated (100) and (001) cleavage planes, the presence of low angle grain boundaries (LAGBs) and twins, and the potential formation of polycrystalline grains. In this study, β-Ga 2 O 3 crystals were grown by the edge-defined film-fed growth technique with an (010) principal face. Two crystals with apparently randomly formed high angle grain boundaries (HAGBs) were selected and analyzed by electron backscatter diffraction, electron channeling contrast imaging, and cathodoluminescence to investigate the nature of the LAGBs and the source of the HAGB formation. It was discovered that planar LAGBs lying parallel to the (010) plane exist in the region immediately preceding the start of an HAGB. Increased misorientation across the LAGB was observed, approaching the initiation of a new grain. We present multimodal microscopy characterization, correlating misorientation and variation in optoelectronic properties with LAGBs and the associated dislocations.

14 SOLAR ENERGY↗
DOE OSTI2023

Vacancy complexes in Cd 3 As 2

Epitaxial growth of the three-dimensional topological semimetal Cd 3 As 2 on semiconductor substrates enables its use and integration in device applications. Epitaxy also provides an avenue for varying and controlling point defects through modification of the chemical potential during growth. In turn, knowledge of the point defects that are generated in Cd 3 As 2 epilayers will aid the interpretation of electron transport behavior and guide growth efforts to produce material with low defect densities. Point defects in Cd 3 As 2 epilayers grown by molecular beam epitaxy with varying As/Cd flux ratios are probed by positron annihilation spectroscopy. We find that lower As/Cd flux ratios produce higher concentrations of point defects. Remarkably, the measurements indicate that the average defect size is larger than a monovacancy. The data presented here contribute to an evolving picture of vacancy point defects in Cd 3 As 2 and can be used to direct future investigation of the defect-transport relationships in this emerging electronic material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Photovoltaics at multi-terawatt scale: Waiting is not an option

We report a major renewable-energy milestone occurred in 2022: Photovoltaics (PV) exceeded a global installed capacity of 1 TW dc . But despite considerable growth and cost reduction over time, PV is still a small part of global electricity generation (4 to 5% for 2022), and the window is increasingly closing to take action at scale to cut greenhouse gas (GHG) emissions while meeting global energy needs for the future. PV is one of very few options that can be dispatched relatively quickly, but discussions of TW-scale growth at the global level may not be clearly communicating the needed size and speed for renewable-energy installation. A major global risk would be to make poor assumptions or mistakes in modeling and promoting the required PV deployment and industry growth and then realize by 2035 that we were profoundly wrong on the low side and need to ramp up manufacturing and deployment to unrealistic or unsustainable levels.

14 SOLAR ENERGY↗
NASA NTRS2002

Optimizing Performance of Far-Infrared Photoconductors: New Approach for Interpretation and Calibration of Transient Response

The goals of the proposed work were to determine if final steady state current values for Ge:Ga photoconductors could be predicted from the initial fast component of the transient response and to develop algorithms to operationalize this approach. This required transient measurements as a function of photon background and signal sizes, for both single shot and modulated signals. In addition, we proposed to address the nature of the hook response and the effects of non-equilibrium background fluctuations.

Haegel, Nancy M.↗
NASA NTRS1989

Near contact phenomena and transient effects in far infrared photoconductors

A combination of experimental and modeling work is summarized in two areas: first, the calculation of excess free carrier and space charge distributions near contacts and their effects on device resistivity, and second, the characterization of a slow transient response (tau approx. 1 sec) in Ge:Be detectors which is due to trapping associated with Be(+) formation. In both cases, analytical models, based on continuity and rate equations, have been developed to enable the application of these findings to a wide variety of photoconductor materials.

Haegel, Nancy M.↗