Engineering topics

Guo, Juchen

Publications and source records attributed to Guo, Juchen.

12 records

DOE OSTI2024

Nonsolvating Fluoroaromatic Cosolvent Enabled Long-Term Cycling of High-Voltage Lithium-Ion Batteries with Organosulfur Electrolytes

Here, the structure–activity relationships of nonsolvating cosolvents for organosulfur-based electrolyte systems were revealed. The performance of nonsolvating dilutant fluorobenzene (FB) was compared to various fluorinated ether dilutants in high-voltage electrolytes containing a concentration of 1.2 M LiPF 6 dissolved in fluoroethylene carbonate (FEC), ethyl methyl sulfone (EMS), and the dilutant. In a high-voltage and high-loading LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cell configuration, the organosulfur-based electrolyte containing FB dilutant enabled superior electrochemical performance compared to the electrolytes using other nonsolvating fluorinated ether formulations. Moreover, the FB-containing electrolyte exhibited the highest ionic conductivity and lowest viscosity among all organosulfur-based electrolytes containing nonsolvating dilutant. These improvements are attributed to the enhanced physical properties of electrolyte and lithium-ion mobility. Furthermore, by employing first-principles simulations, the observed suppression of side reactions at high voltage is linked to FB’s lower reactivity toward singlet dioxygen, which is likely produced at the NMC interface. Overall, FB is considered an excellent diluent that does not impede cell operation by mass decomposition at the cathode.

25 ENERGY STORAGE↗

DOE OSTI2024

Development of Electrolytes under Lean Condition in Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries stand out as one of the promising candidates for next-generation electrochemical energy storage technologies. A key requirement to realize high-specific-energy Li–S batteries is to implement low amount of electrolyte, often characterized by the electrolyte/sulfur (E/S) ratio. Low E/S ratio aggravates the known challenges for Li–S batteries and introduces new ones originated from the high concentration of polysulfides in limited electrolyte reservoir. Here, in this review, the connections between the fundamental properties of electrolytes and the electrochemical/chemical reactions in Li–S batteries under lean electrolyte condition are elucidated. The emphasis is on how the solvating properties of the electrolyte affect the fate of polysulfides. Built upon the mechanistic analysis, different strategies to design lean electrolytes to improve the overall process of Li–S reactions and Li anode protection are discussed.

25 ENERGY STORAGE↗

DOE OSTI2024

Carbon Management with Advanced Materials: An Assessment of Experimental and Computational Capabilities at the University of California-Riverside

The major goals of this project were to conduct an R&D scoping study and self-assessment to evaluate how the current capabilities, expertise, personnel, and facilities/equipment of UC Riverside (UCR) align with Fossil Energy and Carbon Management (FECM) objectives. This scoping study particularly focused on the Materials Science & Engineering program since it encompasses faculty from nearly all the engineering and science departments in UCR with expertise in experimental and computational areas of potential interest to FECM. In addition, this assessment identified gaps in capabilities and provided a discussion on what would enable UCR to be better prepared for potential future competitive solicitations focused on FECM-supported technologies.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Sulfur Solutions: Advancing High Voltage and High Energy Lithium Batteries with Organosulfur Electrolytes

Achieving energy densities exceeding 350 Wh kg -1 while operating at elevated voltages (>4.5 V vs Li/Li + ) is attainable through judicious selection of electrochemical pairs at the cathode and anode. However, current state-of-the-art electrolytes exhibit limited stability when exposed to systems operating at or above 4.3 V. This limitation contributes to the degradation of electrode materials and raises critical safety concerns, impeding the commercialization of such systems. Consequently, there has been a notable surge in research efforts aimed at developing innovative electrolyte compositions capable of supporting high-voltage lithium-ion batteries (LIBs). A substantial portion of this research has focused on the family of organosulfur molecules, which possess high oxidative stability. Organosulfur salts also facilitate the formation of dense, ionically conductive solid electrolyte interfaces (SEI) and demonstrate excellent solubility. This article provides a comprehensive overview of the field of organosulfur electrolyte components for their applications in energy storage, encompassing solvents, alternative conducting salts, and additives. It emphasizes the idea that the deliberate design of electrolyte compositions is instrumental in controlling electrode passivation, with organosulfur-based structures historically proving advantageous in every aspect of the electrolyte. Crucially, it should be noted that many of these components are commercially available, holding significant implications for industrial applications.

25 ENERGY STORAGE↗

DOE OSTI2023

Terminally fluorinated glycol ether electrolyte for lithium metal batteries

Despite being an excellent candidate for lithium metal batteries due to its stability towards lithium metal, ethereal solvent suffers from relatively low anodic stability, rendering it incompatible with high voltage cathode. Although the anodic stability of ethereal solvent can be enhanced by fluorination, the lithium solvating ability of fluorinated ethers is largely reduced. As a result, common hydrofluoroethers, such as 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TTE) and bis(2,2,2-trifluoroethyl) ether (BTFE) are not able to dissolve any lithium salt, albeit enhanced oxidation potential. Therefore, new fluorinated glycol ethers were synthesized in this research. The diglyme analog, which was terminally fluorinated, demonstrated high anodic stability and excellent capability to facilitate lithium plating/stripping. Unlike its non-fluorinated counterpart, the fluorinated diglyme analog displayed outstanding compatibility with lithium hexafluorophosphate, which is an essential salt in lithium-ion batteries. Here it was shown that the electrolyte based on fluorinated diglyme analog with fluoroethylene carbonate as co-solvent enabled highly stable cycling of Li-metal batteries pairing with layered oxide cathode.

25 ENERGY STORAGE↗

DOE OSTI2022

Performance Leap of Lithium Metal Batteries in LiPF 6 Carbonate Electrolyte by a Phosphorus Pentoxide Acid Scavenger

Phosphorus pentoxide (P 2 O 5 ) is investigated as an acid scavenger to remove the acidic impurities in a commercial lithium hexafluorophosphate (LiPF 6 ) carbonate electrolyte to improve the electrochemical properties of Li metal batteries. Nuclear magnetic resonance (NMR) measurements reveal the detailed reaction mechanisms of P 2 O 5 with the LiPF 6 electrolyte and its impurities, which removes hydrogen fluoride (HF) and difluor-ophosphoric acid (HPO 2 F 2 ) and produces phosphorus oxyfluoride (POF 3 ), OF 2 P-O-PF 5 - anions, and ethyl difluorophosphate (C 2 H 5 OPOF 2 ) as new electrolyte species. The P 2 O 5 -modified LiPF 6 electrolyte is chemically compatible with a Li metal anode and LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathode, generating a PO x F y -rich solid electrolyte interphase (SEI) that leads to highly reversible Li electrodeposition, while eliminating transition metal dissolution and cathode particle cracking. The excellent electrochemical properties of the P 2 O 5 -modified LiPF6 electrolytes are demonstrated on Li||NMC622 pouch cells with 0.4 Ah capacity, 50 mu m Li anode, 3 mAh cm -2 NMC622 cathode, and 3 g Ah -1 electrolyte/capacity ratio. The pouch cells can be galvanostatically cycled at C/3 for 230 cycles with 87.7% retention.

25 ENERGY STORAGE↗

DOE OSTI2021

Solvation-protection-enabled high-voltage electrolyte for lithium metal batteries

To facilitate the practical application of lithium metal batteries (LMBs), stable interfaces between the electrolyte and the lithium metal must be achieved. Herein, we introduce a solvation protection strategy for designing a functional electrolyte for high-voltage LMBs. Fluoroethylene carbonate (FEC) was introduced as a solvation protection solvent for the difluoroethylene carbonate (DFEC)/trifluoroethyl methyl carbonate (FEMC) electrolyte system to enable the cycling of lithium metal anode. The addition of FEC alters the structures of lithium complexes in solution because of its relatively high solvating power. Through the precise control of the solvation number (> 1) of fluorinated cyclic carbonate (i.e., FEC:DFEC > critical ratio), lithium complexes with Li + solvated solely by FEMC, which decompose on the lithium surface to form detrimental by-products, can be effectively eliminated. Here, the new ternary FEC/DFEC/FEMC system not only maintains the beneficial effect of DFEC in forming a robust solid-electrolyte interphase on the lithium anode, but also confers outstanding anodic stability provided by FEMC, while eliminating detrimental FEMC decomposition through the solvation protection effect of FEC. Clearly, this ternary system outperforms the FEC/FEMC and DFEC/FEMC binary systems in facilitating the stable cycling of LMBs.

25 ENERGY STORAGE↗

DOE OSTI2021

Enabling Magnesium Anodes by Tuning the Electrode/Electrolyte Interfacial Structure

Here, a new deposition mechanism is presented in this study to achieve highly reversible plating and stripping of magnesium (Mg) anodes for Mg-ion batteries. It is known that the reduction of electrolyte anions such as bi s (trifluoromethanesulfonyl) imide (TFSI - ) causes Mg surface passivation, resulting in poor electrochemical performance for Mg-ion batteries. We reveal that the addition of sodium cations (Na + ) in Mg-ion electrolytes can fundamentally alter the interfacial chemistry and structure at the Mg anode surface. The molecular dynamics simulation suggests that Na + cations contribute to a significant population in the interfacial double layer so that TFSI - anions are excluded from the immediate interface adjacent to the Mg anode. As a result, the TFSI - decomposition is largely suppressed so does the formation of passivation layers at the Mg surface. This mechanism is supported by our electrochemical, microscopic, and spectroscopic analyses. The resultant Mg deposition demonstrates smooth surface morphology and lowered overpotential compared to the pure Mg(TFSI) 2 electrolyte.

25 ENERGY STORAGE↗

DOE OSTI2021

Regulating lithium deposition via electropolymerization of acrylonitrile in rechargeable lithium metal batteries

Here, we report acrylonitrile (AN) as an effective additive in carbonate-based electrolytes to enable uniform and dense lithium (Li) deposition and to improve the coulombic efficiency of Li metal anode. Our electrochemical, spectroscopic, and theoretical study reveal that AN is cathodically electropolymerized on the Li surface prior to the electrochemical decomposition of the electrolyte during Li deposition. The resultant polyacrylonitrile artificial solid electrolyte interphase enables uniform nucleation and growth of Li deposition with significantly reduced side reactions. The effectiveness of the AN additive is demonstrated in 0.4 Ah Li||LiNi 0.6 Mn 0.2 Co 0.2 O 2 pouch cells (using 50-μm Li anode, 3 mAh cm -2 cathode areal capacity, and 4g Ah -1 electrolyte) with excellent cycle stability under realistic charge-discharge condition

25 ENERGY STORAGE↗

DOE OSTI2021

Superior long-term cycling of high-voltage lithium-ion batteries enabled by single-solvent electrolyte

A new single-solvent electrolyte system comprising lithium bis(fluorosuflonyl) imide (LiFSI) and beta-fluorinated sulfone (TFPMS) was designed to enable very stable long-term cycling of high-voltage lithium-ion batteries. Compared to other fluorinated solvents such as alpha-fluorinated sulfone (FMES) and fluorinated carbonate (FEMC), which are prone to reduction on the graphite anode, the LiFSI-TFPMS system displayed outstanding compatibility with graphite. While regular carbonate and sulfone from the LiFSI electrolyte system are compatible with the graphite anode, their high solvating power not only induces severe corrosion on the aluminum cathode current collector at high voltage, but also renders a low aggregation level at a normal salt concentration (about 1.0 M), resulting in the formation of an unstable solid-electrolyte interphase (SEI) on the graphite anode. Owing to the low solvating power of TFPMS, the aggregation level of the LiFSI-TFPMS system is relatively high even at normal salt concentration, which not only facilitates the formation of a robust SEI by the sacrificial decomposition of LiFSI, but also suppresses the aluminum corrosion of the LiFSI electrolyte system at high voltage. Together with the high intrinsic anodic stability of TFPMS, the superior cycling performance of graphite parallel to LiNi 0.6 Co 0.2 Mn 0.2 O 2 cells was achieved by employing the non-flammable LiFSI-TFPMS single-solvent electrolyte system.

25 ENERGY STORAGE↗

DOE OSTI2021

Principle in developing novel fluorinated sulfone electrolyte for high voltage lithium-ion batteries

A new class of fluorinated sulfones, β-fluorinated sulfones, were designed and synthesized as electrolyte solvents for high voltage lithium-ion batteries. While the oxidation potential of β-fluorinated sulfones is slightly lower than that of α-fluorinated sulfones, it is still significantly higher than the oxidation potential of regular sulfones, which already possess fairly high anodic stability. However, β-fluorinated sulfones exhibit a significant decrease in reduction potential compared to α-fluorinated sulfones, rendering them more stable towards graphite anodes. Moreover, the reduced lithium solvating power of β-fluorinated sulfones compared to regular sulfones mitigates the transition metal dissolution of cathodes. Taken together, these middle ground properties of β-fluorinated sulfone-based electrolytes enable the very stable long-term cycling of graphite||LiNi 0.6 Co 0.2 Mn 0.2 O 2 full cells. Finally, the outstanding performance of β-fluorinated sulfones designed by applying the “golden middle way” paves a new path for the development of an effective electrolyte system.

25 ENERGY STORAGE↗

DOE OSTI2021

Stability of Calcium Ion Battery Electrolytes: Predictions from Ab Initio Molecular Dynamics Simulations

Multivalent batteries, such as magnesium-ion, calcium-ion, and zinc-ion batteries, have attracted significant attention as next-generation electrochemical energy storage devices to complement conventional lithium-ion batteries (LIBs). Among them, calcium-ion batteries (CIBs) are the least explored due to the difficult reversible Ca deposition-dissolution. In this work, we examined the stability of four different Ca salts with weakly coordinating anions and three different solvents commonly employed in existing battery technologies to identify suitable candidates for CIBs. By employing Born-Oppenheimer molecular dynamics (BOMD) simulations on salt-Ca and solvent-Ca interfaces, we find that the tetraglyme solvent and carborane salt are promising candidates for CIBs. Due to the strong reducing nature of the calcium surface, the other salts and solvents readily decompose. Further, we explain the microscopic mechanisms of salt/solvent decomposition on the Ca surface using time-dependent projected density of states, time-dependent charge-transfer plots, and climbing-image nudged elastic band calculations. Collectively, this work presents the first mechanistic assessment of the dynamical stability of candidate salts and solvents on a Ca surface using BOMD simulations, and provides a predictive path toward designing stable electrolytes for CIBs.

Born-Oppenheimer molecular dynamics↗