Engineering Papers⌕ Search

Engineering topics

Guinn, Joseph R.

Publications and source records attributed to Guinn, Joseph R..

18 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Stationkeeping, Orbit Determination, and Attitude Control for Spacecraft in Near Rectilinear Halo Orbits

Final document is attached. From a Near Rectilinear Halo Orbit (NRHO), NASA's Gateway at the Moon is planned to serve as a proving ground and a staging location for human missions beyond Earth. Stationkeeping, Orbit Determination (OD), and attitude control are examined for uncrewed and crewed Gateway configurations. Orbit maintenance costs are investigated using finite maneuvers, considering skipped maneuvers and perturbations. OD analysis assesses DSN tracking and identifies OD challenges associated with the NRHO and crewed operations. The Gateway attitude profile is simulated to determine an effective equilibrium attitude. Attitude control propellant use and sizing of the required passive attitude control system are assessed.

Newman, Clark P.↗
NASA NTRS2018

Stationkeeping, Orbit Determination, and Attitude Control for Spacecraft in Near Rectilinear Halo Orbits

From a Near Rectilinear Halo Orbit (NRHO), NASA’s Gateway at the Moon is planned to serve as a proving ground and a staging location for human missions beyond Earth. Stationkeeping, Orbit Determination (OD), and attitude control are examined for uncrewed and crewed Gateway configurations. Orbit maintenance costs are investigated using finite maneuvers, considering skipped maneuvers and perturbations. OD analysis assesses DSN tracking and identifies OD challenges associated with the NRHO and crewed operations. The Gateway attitude profile is simulated to determine an effective equilibrium attitude. Attitude control propellant use and sizing of the required passive attitude control system are assessed.

Ryne, Mark S.↗
NASA NTRS2016

The Deep-Space Positioning System Concept: Automating Complex Navigation Operations Beyond the Earth

There is no equivalent of GPS in “deep space,” that is beyond the Earth Moon system (and use of GPS beyond LEO and MEO is already problematic.) NASA has been awarded a patent on the concept of the “Deep-space Positioning System” (DPS) which is a self-contained instrument concept that would use in-situ observations to provide an automated and autonomous means of determining its position in the Solar System, and at least as important, its position relative to a target, whether that target is a planet, asteroid, moon or comet. In addition, the DPS system computes trajectory change parameters, as necessary to keep a spacecraft on a planned trajectory. Implementation options include the use of a radio receiver to receive a frequency beacon from a non-in-situ source for additional navigation information over and above that which can be provided by the cameras that are the principal data source of DPS. This paper discusses the DPS instrument concept, and its potential use in deep space.

Guinn, Joseph R.↗
NASA NTRS2012

Trajectory Options for a Potential Mars Mission Combining Orbiting Science, Relay and a Sample Return Rendezvous Demonstration

Mars sample return is a major scientific goal of the 2011 US National Research Council Decadal Survey for Planetary Science. Toward achievement of this goal, recent architecture studies have focused on several mission concept options for the 2018/2020 Mars launch opportunities. Mars orbiters play multiple roles in these architectures such as: relay, landing site identification/selection/certification, collection of on-going or new measurements to fill knowledge gaps, and in-orbit collection and transportation of samples from Mars to Earth. This paper reviews orbiter concepts that combine these roles and describes a novel family of relay orbits optimized for surface operations support. Additionally, these roles provide an intersection of objectives for long term NASA science, human exploration, technology development and international collaboration.

surface operations↗
NASA NTRS2010

Telecommunications Relay Support of the Mars Phoenix Lander Mission

The Phoenix Lander, first of NASA's Mars Scout missions, arrived at the Red Planet on May 25, 2008. From the moment the lander separated from its interplanetary cruise stage shortly before entry, the spacecraft could no longer communicate directly with Earth, and was instead entirely dependent on UHF relay communications via an international network of orbiting Mars spacecraft, including NASA's 2001 Mars Odyssey (ODY) and Mars Reconnaissance Orbiter (MRO) spacecraft, as well as ESA's Mars Express (MEX) spacecraft. All three orbiters captured critical event telemetry and/or tracking data during Phoenix Entry, Descent and Landing. During the Phoenix surface mission, ODY and MRO provided command and telemetry services, far surpassing the original data return requirements. The availability of MEX as a backup relay asset enhanced the robustness of the surface relay plan. In addition to telecommunications services, Doppler tracking observables acquired on the UHF link yielded an accurate position for the Phoenix landing site.

Edwards, Charles D., Jr.↗
NASA NTRS2004

Mars Exploration Rovers orbit determination filter strategy

The successful delivery of the Mars Exploration Rover (MER) landers to well within the boundaries of their surface target areas in January of 2004 was the culmination of years of orbit determination analysis. The process began with a careful consideration of the filter parameters used for pre-launch covariance studies, and continued with the refinement of the filter after launch based on operational experience. At the same time, tools were developed to run a plethora of variations around the nominal filter and analyze the results in ways that had never been previously attempted for an interplanetary mission. In addition to achieving sub-kilometer Mars-relative orbit determination knowledge, the filter strategy and process detected unexpected error sources, while at the same time proving robust by indicating thecorrect solution. Consequently, MER orbit determination set a new standard for interplanetary navigation.

Mars Exploration Rover (MER)↗
NASA NTRS1995

TOPEX/Poseidon Precision Orbit Determination Using Combined GPS, SLR, and DORIS

TOPEX/Poseidon (T/P) is a joint spaceborne oceanographic mission of U.W. NASA and France CNES design launched August 10, 1992. The satellite has a variety tracking systems for both operational and precision orbit determination. Three precise tracking systems: Satellite Laser Ranging (SLR), Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS), and Global Positioning System (GPS) provide high quality measurements essential for reconstructing the T/P orbital height with centimeter precision. This paper presents results of simultaneously processing all three data types to exploit the inherent strength of each in a combined solution. SLR and DORIS are routinely combined to provide orbit solutions for the T/P science team. GPS orbit solutions are produced as part of the first demonstration flight of a high quality spaceborne GPS receiver. Coordinate frame and software system differences between the combined SLR/DORIS orbits and the GPS orbits induce orbital height differences of 2 to 3 centimeters. Combining the three data types within a single software system permits removal of software system differences while obtaining coordinate frame calibration information. These calibrations will aid future spaceborne GPS missions that are not complemented with SLR and/or DORIS.

TOPEX/Poseidon↗
NASA NTRS1995

TAOS Orbit Determination Results Using Global Positioning Satellites

Orbit determination results for the Air Force Phillips Laboratory's Technology for Autonomous Operational Survivability (TAOS) satellite using a Rockwell AST V Global Positioning System (GPS) receiver are presented in this paper. Under a cooperative effort, GPS orbit determination technology developed at Jet Propulsion Laboratory (JPL) has been transferred to the U.S. Air Force. JPL's post processing differential GPS software MIRAGE [1] was modified to perform precise orbit determination for the TAOS satellite. Reconstructed TAOS position accuracies of 10 meters (3 sigma) are the objective. With four days of data, three-dimensional positions of less than 3 meters (1 sigma) have been achieved with overlapping orbit determination spans. Orbit determination results are also compared with those of the on-board GPS receiver's navigation solutions and with the Air Force's Satellite Control Network SGLS processing.

TAOS↗
NASA NTRS1994

Conversion Of Classical Orbital Elements

OSMEAN is sophisticated program that converts between osculating and mean classical orbital elements. Enables engineer to exploit advantages of each approach for design and planning or orbital trajectories and maneuvers. Converts mean elements to osculating elements or vice-versa. Conversion based on mathematical modeling of all first-order aspherical terrestrial, lunar, and solar gravitational perturbations plus second-order aspherical term based on second-degree central-body zonal perturbation. Written in FORTRAN 77.

Guinn, Joseph R.↗
NASA NTRS1993

TOPEX/Poseidon Operational Orbit Determination Results Using Global Positioning Satellites

Results of operational Orbit detemination, Performed as part of the TOPEX/Poseidon (T/P) Global Positionin Satellite (GPS) demonstration experiment, are presented in this paper. Elements of this experiment include the GPS satellite constellation, GPS Demonstration Receiver on-board T/P, six ground GPS receivers, the GPS Data Handling Facility and the GPS Data processing Facility (GDPF).

TOPEX/Poseidon↗
NASA NTRS1991

Periodic gravitational perturbations for conversion between osculating and mean orbit elements

Algorithms for converting between osculating and mean orbit elements are currently limited to computing the contribution due to the second zonal harmonic (J2). This paper presents an improved conversion algorithm that includes the effects of all zonal, sectorial and tesseral harmonics, second order J2, and third-body gravitational perturbations. Mean elements are useful for preliminary orbit and maneuver design; however, for more precise work, such as groundtrack targeting, osculating elements are required. This improved conversion algorithm was developed to meet accuracy requirements for the TOPEX/Poseidon mission; but, additional use can be considered for satellites orbiting planets like Venus that do not have a dominant J2. Results are presented from tests performed using the new algorithm with the planned TOPEX/Poseidon earth orbit as well as the Mars Observer and proposed circular Magellan (Venus) orbits.

Guinn, Joseph R.↗