Engineering topics

Guerrero, Pablo

Publications and source records attributed to Guerrero, Pablo.

5 records

NASA NTRS2018

Hollow Cathode Thermal Modelling and Self-Consistent Plasma Solution: Work Function Evaluation for a LaB6 Cathode.

Self-heating hollow cathodes are central components in modern electric thrusters. The plasma discharge inside these devices heats the internal components, thus maintaining the temperatures required for electron emission. Precise knowledge of the physical phenomena governing hollow cathode operation is key to predict their lifetime, speciﬁcally, their thermionic emission characteristics. A simulation platform has been built to couple plasma and thermal models of the self-heating hollow cathode to produce a self-consistent solution. A self-consistent solution has been found for a LaB6 hollow cathode operating at 25A and 13 sccm where the work function is assumed to be spatially uniform along the emitter with a value which is allowed to vary as the coupled model iterates to a self-consistent solution. The emitter temperature from the converged solution does not agree with experimental temperature measurements, however. The results of a sensitivity analysis suggest that none of the tolerances in the measurement are responsible for the discrepancy. We hypothesize that either the work function needs to be a function of position along the emitting surfaces or the heat ﬂuxes have been overestimated in the plasma solver.

Meiron, Daniel I.↗

NASA NTRS2018

Investigations of Spot-to-plume Mode Transition in a Hollow Cathode Discharge Using 2-D Axisymmetric Plasma Simulations

After decades of laboratory investigations that provided invaluable measurements and insight, the physics behind the transition from spot to plume modes in hollow cathodes remains one of the longest standing theoretical problems in electric propulsion. This has prohibited the development of ab initio models that allow for the prediction of the transition across different cathodes and operating conditions. Since the beginning of its development over a decade ago, simulations with the 2-D axisymmetric Orificed Cathode (OrCa2D) code have helped elucidate a wide range of processes in hollow cathode discharges. However, the code has never been used to investigate the onset of plume mode. We present results from the first OrCa2D simulations of a 25-A LaB6 cathode for a range of flow rates (5-20 sccm) in which transition from spot to plume modes is known to occur. The cathode in this study was one of the two technologies considered for the 12.5 kW Hall Effect Rocket with Magnetic Shielding (HERMeS) and operates nominally at 21 A and 14.8 sccm. The simulations capture the characteristic rise of the peak-to-peak amplitude in the keeper voltage oscillations and underscore the significance of the plume neutral gas in the transition. The plasma inside the cathode is found to be relatively quiescent throughout the transition, in agreement with previous experimental observations. The computed keeper voltage fluctuations at low flow rates (<8 sccm) are found to be driven by oscillations of the same frequency in the plasma plume with the following main characteristics: (1) they are of low frequency (<10 kHz), and associated with small longitudinal motion in the direction of the applied magnetic field, (2) they occur in a region of the plume where the neutral gas provided by the cathode has been fully depleted, and (3) they have a (small) wave velocity of about 100 m/s, which is at least ~10 smaller than the drift, thermal and acoustic speeds of the ions. At 8 sccm, when the transition to the large-amplitude oscillations begins, the ionization frequency in the neutral-depleted plume region ranges ~2-100 kHz. The frequency of the oscillations in the plasma (and keeper voltage) is found to be equal to the ionization frequency (~5 kHz) at the center of this region. The findings suggest that the transition to plume mode is driven by ionization processes in the near-plume of the cathode, in line with previous conjectures that were based solely on laboratory observations.

Polk, James E.↗

NASA NTRS2017

Work function reduction in lanthanum hexaboride hollow cathodes operated in gas discharges

Thermal characterization of lanthanum hexaboride (LaB6) hollow cathodes has revealed lower than expected electron emitter temperatures when the cathode reaches steady state. This phenomenon is observed at discharge currents ranging from 5 to 35 A and xenon mass ow rates of 5 to 25 sccm in cathodes with three di erent ori ce diameters. Thus, the accepted value of the work function for polycrystalline LaB6, 2.66 eV, does not describe well the emission characteristics of LaB6 hollow cathodes operating with internal gas discharges at steady state. The measured temperatures and a model of the hollow cathode emitter and xenon discharge were used to estimate the value of the work function in these experiments, yielding a value ranging from 2.1 - 2.44 eV. Measurements of the work function as a function of depth on a hollow cathode emitter using X-ray photoelectron spectroscopy and ion beam milling indicate that the work function in a thin layer near the emitting surface is lower than in the bulk material. We postulate that a lanthanum-rich emitting surface with a lower work function develops as a result of lanthanum recycling in the internal plasma.

Lopez Ortega, Alejandro↗

NASA NTRS2017

Inner Front Pole Cover Erosion in the 12.5 kW HERMeS Hall Thruster Over a Range of Operating Conditions

Erosion characteristics on the cover of the inner front pole in a 12.5 kW Hall thruster were measured over a wide range of operating conditions in tests of 6 to 14 hours duration using an accelerated test method and a very sensitive radioactive tracer-based erosion diagnostic. The operating points included the nominal 300 - 600 V conditions on a constant 20.8 A throttle curve, but included additional conditions at other currents spanning the throttling envelope and measurements at varying magnetic eld strength, facility pressure, and discharge voltage oscillation amplitude. The results show that the 300 V condition produces the highest wear rates on the 20.8 A throttle curve, but that rates actually increase with decreasing current. The wear rate was insensitive to discharge voltage ripple, but increased monotonically with magnetic eld strength, particularly near the inner radius of the pole cover. The inner region was also sensitive to facility pressure, showing lower rates at a higher pressure level. Separate experiments in which the energy distributions of ions generated by the hollow cathode were measured suggest that the cathode plume may be a source of energetic ions responsible for some of the erosion trends, in addition to ions originating in the thruster plume. The Hall thruster simulation code Hall2De is able to reproduce the erosion characteristics observed at 600 V, 20.8 A, but cannot currently match the rates measured at lower voltages and currents.

Lopez Ortega, Alejandro↗

NASA NTRS2013

Numerical Simulations of the Partially-Ionized Gas in a 100-A LaB6 Hollow Cathode

Numerical simulations of a hollow cathode with a LaB6 emitter operating at 100 A have been performed for the first time using the 2-D Orificed Cathode (OrCa2D) code. Results for a variety of plasma properties are presented and compared with laboratory measurements. The large size of the device permits peak electron number densities in the cathode interior that are lower than those established in the NSTAR hollow cathode, which operates with a 7.3x lower discharge current and 3.2x lower mass flow rate. Also, despite the higher discharge current in the LaB6 cathode, the maximum electron current density is lower, by 4.2x, than that in the NSTAR cathode due to the larger orifice size. Simulations and direct measurements show that at 12 sccm of xenon flow the peak emitter temperature is in the range of 1594-1630 C. It is also found that the conditions for the excitement of current-driven streaming instabilities and ion-acoustic turbulence (IAT) are satisfied in this cathode, similarly to what was found in the past in its smaller counterparts like the NSTAR cathode. Based on numerical simulations, it has long been argued that these instabilities may be responsible for the anomalously large ion energies that have been measured in these discharges as well as for the enhancement of the plasma resistivity. Confirmation of the presence of IAT in this cathode is presented for the first time in a companion paper.

robotic exploration↗