Engineering Papers⌕ Search

Engineering topics

Gruber, M.

Publications and source records attributed to Gruber, M..

Hysteresis and change of transition temperature in thin films of Fe([Me{sub 2}Pyrz]{sub 3}BH){sub 2}, a new sublimable spin-crossover molecule

Thin films of the spin-crossover (SCO) molecule Fe([Me{sub 2}Pyrz]{sub 3}BH){sub 2} (Fe-pyrz) were sublimed on Si/SiO{sub 2} and quartz substrates, and their properties investigated by X-ray absorption and photoemission spectroscopies, optical absorption, atomic force microscopy, and superconducting quantum interference device. Contrary to the previously studied Fe(phen){sub 2}(NCS){sub 2}, the films are not smooth but granular. The thin films qualitatively retain the typical SCO properties of the powder sample (SCO, thermal hysteresis, soft X-ray induced excited spin-state trapping, and light induced excited spin-state trapping) but present intriguing variations even in micrometer-thick films: the transition temperature decreases when the thickness is decreased, and the hysteresis is affected. We explain this behavior in the light of recent studies focusing on the role of surface energy in the thermodynamics of the spin transition in nano-structures. In the high-spin state at room temperature, the films have a large optical gap (∼5 eV), decreasing at thickness below 50 nm, possibly due to film morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Challenges in the study of Fe/MgO/Fe interfaces using 3D atom probe

Detailed interface studies were conducted on two Fe/MgO/Fe systems having different thicknesses of MgO layers, using a laser assisted 3D atom probe. In conjunction with a detailed 3D reconstruction, the system exhibited an additional oxide formation at the interface between MgO and Fe of the multilayer structure. This oxide formation was found to be independent of the laser wavelength, laser fluence and the thickness of the intermediate layers. Furthermore, by using numerical simulations of field evaporation of two layers having two different evaporation fields, we discuss the possible oxidation mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elementary steps of the catalytic NO{sub x} reduction with NH{sub 3}: Cluster studies on reaction paths and energetics at vanadium oxide substrate

We consider different reaction scenarios of the selective catalytic reduction (SCR) of NO in the presence of ammonia at perfect as well as reduced vanadium oxide surfaces modeled by V{sub 2}O{sub 5}(010) without and with oxygen vacancies. Geometric and energetic details as well as reaction paths are evaluated using extended cluster models together with density-functional theory. Based on earlier work of adsorption, diffusion, and reaction of the different surface species participating in the SCR we confirm that at Brønsted acid sites (i.e., OH groups) of the perfect oxide surface nitrosamide, NH{sub 2}NO, forms a stable intermediate. Here adsorption of NH{sub 3} results in NH{sub 4} surface species which reacts with gas phase NO to produce the intermediate. Nitrosamide is also found as intermediate of the SCR near Lewis acid sites of the reduced oxide surface (i.e., near oxygen vacancies). However, here the adsorbed NH{sub 3} species is dehydrogenated to surface NH{sub 2} before it reacts with gas phase NO to produce the intermediate. The calculations suggest that reaction barriers for the SCR are overall higher near Brønsted acid sites of the perfect surface compared with Lewis acid sites of the reduced surface, examined for the first time in this work. The theoretical results are consistent with experimental findings and confirm the importance of surface reduction for the SCR process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First glimpse of the soft x-ray induced excited spin-state trapping effect dynamics on spin cross-over molecules

The dynamics of the soft x-ray induced excited spin state trapping (SOXIESST) effect of Fe(phen){sub 2}(NCS){sub 2} (Fe-phen) powder have been investigated by x-ray absorption spectroscopy (XAS) using the total electron yield method, in a wide temperature range. The low-spin (LS) state is excited into the metastable high-spin (HS) state at a rate that depends on the intensity of the x-ray illumination it receives, and both the temperature and the intensity of the x-ray illumination will affect the maximum HS proportion that is reached. We find that the SOXIESST HS spin state transforms back to the LS state at a rate that is similar to that found for the light induced excited spin state trapping (LIESST) effect. We show that it is possible to use the SOXIESST effect in combination with the LIESST effect to investigate the influence of cooperative behavior on the dynamics of both effects. To investigate the impact of molecular cooperativity, we compare our results on Fe-phen with those obtained for Fe([Me{sub 2}Pyrz]{sub 3}BH){sub 2} (Fe-pyrz) powder, which exhibits a similar thermal transition temperature but with a hysteresis. We find that, while the time constant of the dynamic is identical for both molecules, the SOXIESST effect is less efficient at exciting the HS state in Fe-pyrz than in Fe-phen.

36 MATERIALS SCIENCE↗

From Space to the Patient: A New Cytokine Release Assay to Monitor the Immune Status of HIV Infected Patients and Sepsis Patients

Monitoring of humans either in the healthy men under extreme environmental stress like space flight, in human immunodeficiency virus (HIV) infected patients or in sepsis is of critical importance with regard to the timing of adequate therapeutic (counter-)measures. The in vivo skin delayed-type hypersensitivity test (DTH) served for many years as a tool to evaluate cell mediated immunity. However, this standardised in vivo test was removed from the market in 2002 due to the risk of antigen stabilization. To the best of our knowledge an alternative test as monitoring tool to determine cell mediated immunity is not available so far. For this purpose we tested a new alternative assay using elements of the skin DTH which is based on an ex vivo cytokine release from whole blood and asked if it is suitable and applicable to monitor immune changes in HIV infected patients and in patients with septic shock.

Kaufmann, I.↗

Preferential adsorption of polycarboxylate superplasticizers on cement and silica fume in ultra-high performance concrete (UHPC)

UHPC is fluidized particularly well when a blend of MPEG- and APEG-type PCEs is applied. Here, the mechanism for this behavior was investigated. Testing individual cement and micro silica pastes revealed that the MPEG-PCE disperses cement better than silica whereas the APEG-PCE fluidizes silica particularly well. This behavior is explained by preferential adsorption of APEG-PCE on silica while MPEG-PCEs exhibit a more balanced affinity to both cement and silica. Adsorption data obtained from individual cement and micro silica pastes were compared with those found for the fully formulated UHPC containing a cement/silica blend. In the UHPC formulation, both PCEs still exhibit preferential and selective adsorption similar as was observed for individual cement and silica pastes. Preferential adsorption of PCEs is explained by their different stereochemistry whereby the carboxylate groups have to match with the steric position of calcium ions/atoms situated at the surfaces of cement hydrates or silica.

36 MATERIALS SCIENCE↗

Particular Characterisation of an In-Vitro-DTH Test to Monitor Cellular Immunity - Applications for Patient Care and Space Flight

Goal:i) Characterization of the role of the main immune reactive cell types contributing to the cellular immune response in the in-vitro DTH and ii) Validation of the in-vitro DTH under different clinical and field conditions. Methods:As positive control whole blood was incubated in the in-vitro DTH, supernatants were gathered after 12, 24 and 48h. Readout parameters of this test are cytokines in the assay's supernatant. To determine the role of T-cells, monocytes and natural killer (NK), these cell populations were depleted using magnetic beads prior to in-vitro-DTH incubation. Validation of the test has occurred under clinical (HIV-patients, ICU) and field-conditions (parabolic/space-flights, confinement). Results:T-cell depletion abandoned almost any IL-2 production and reduced IFN-gamma production irrespective of the type of antigen, whereas CD56 depleted cultures tended to lower IL-2 secretion and IFN-gamma and to parallel a IL-10-increase after viral challenge. This IL-10-increase was seen also in CD14-depleted setups. DTH read-out was significantly different under acute stress (parabolic flight) or chronic stress (ISS), respectively. Preliminary data of HIV infected patients demonstrate that this test can display the contemporary immune status during an antiviral therapy. Conclusion:The in-vitro DTH mirrors adaptive and innate immune activation and may serve as tool also for longitudinal follow up of Th1/Th2 weighed immune response under adverse life conditions on earth and in space. It is planned to implement the assay in the on the ISS (MoCISS).

Feurecker, M.↗

Integral Airframe Structures (IAS): Validated Feasibility Study of Integrally Stiffened Metallic Fuselage Panels for Reducing Manufacturing Costs

The Integral Airframe Structures (IAS) program investigated the feasibility of using "integrally stiffened" construction for commercial transport fuselage structure. The objective of the program was to demonstrate structural performance and weight equal to current "built-up" structure with lower manufacturing cost. Testing evaluated mechanical properties, structural details, joint performance, repair, static compression, and two-bay crack residual strength panels. Alloys evaluated included 7050-T7451 plate, 7050-T74511 extrusion, 6013-T6511x extrusion, and 7475-T7351 plate. Structural performance was evaluated with a large 7475-T7351 pressure test that included the arrest of a two-bay longitudinal crack, and a measure of residual strength for a two-bay crack centered on a broken frame. Analysis predictions for the two-bay longitudinal crack panel correlated well with the test results. Analysis activity conducted by the IAS team strongly indicates that current analysis tools predict integral structural behavior as accurately as built-up structure. The cost study results indicated that, compared to built-up fabrication methods, high-speed machining structure from aluminum plate would yield a recurring cost savings of 61%. Part count dropped from 78 individual parts on a baseline panel to just 7 parts for machined IAS structure.

Munroe, J.↗

Measurement of Unsteady Blade Surface Pressure on a Single Rotation Large Scale Advanced Prop-fan with Angular and Wake Inflow at Mach Numbers from 0.02 to 0.70

Unsteady blade surface pressure data for the Large-Scale Advanced Prop-Fan (LAP) blade operation with angular inflow, wake inflow and uniform flow over a range of inflow Mach numbers of 0.02 to 0.70 is provided. The data are presented as Fourier coefficients for the first 35 harmonics of shaft rotational frequency. Also presented is a brief discussion of the unsteady blade response observed at takeoff and cruise conditions with angular and wake inflow.

Bushnell, P.↗

Path integrals and Liapunov functionals.

Liapunov functionals for time delay systems by path integrals in state space, using convolution equations involving distributions with compact support

Gruber, M.↗