Engineering Papers⌕ Search

Engineering topics

Grot, Stephen

Publications and source records attributed to Grot, Stephen.

Patterned electrode catalyst

Disclosed herein are embodiments of a patterned electrode comprising regions of catalyst and segregating regions that separate the regions of catalyst. The segregating regions may be regions of non-catalytic material. The catalyst regions may correspond to the channels of a flow field. The electrode provides improved fuel cell performance, particularly at high current densities. The electrode may be for all suitable applications, such as in a membrane electrode assembly and/or a fuel cell. Also disclosed is a method for making the patterned electrode. The method may comprise using masks to apply the catalyst and non-catalyst material to a substrate.

Macauley, Natalia↗

Corrugated Membrane Fuel Cell Structures

One of the most challenging aspects of traditional PEM fuel cell stacks is the difficulty achieving the platinum catalyst utilization target of 0.2 gPt/kWe set forth by the DOE. Good catalyst utilization can be achieved with state-of-the-art catalyst coated membranes (CCM) when low catalyst loadings (<0.3 mg/cm 2 ) are used at a low current. However, when low platinum loadings are used, the peak power density is lower than conventional loadings, requiring a larger total active area and a larger bipolar plate. This results in a lower overall stack power density not meeting the DOE target. By corrugating the fuel cell membrane electrode structure, Ion Power’s goal is to realize both the Pt utilization targets as well as the power density targets of the DOE. This will be achieved by demonstrating a fuel cell single cell (50 cm 2 ) with a twofold increase in the membrane active area over the geometric area of the cell by corrugating the MEA structure. The corrugating structure must be able to demonstrate the target properties of < 10 mOhm-cm 2 electrical resistance at > 20 psi compressive strength over the active area, in combination with offering at least 80% of power density that can be achieved by using the same MEA in a flat plate structure. Corrugated membrane fuel cell structures also have the potential to meet DOE power density targets by essentially packaging more membrane area into the same fuel cell volume as compared to conventional stack constructions.

08 HYDROGEN↗

SBIR Phase I final Report

The approach that we propose here in this SBIR proposal is a modified water electrolysis cell. In conventional water electrolysis the H2O is split into electrons, protons, and oxygen gas at the anode electrode. The electrons travel through an external power source and the protons travel through an electrolyte membrane to the cathode where they recombine to form hydrogen gas. The power source requires a minimum of 1.23 V to overcome the potential difference of the electrodes for the splitting of water. In contrast in our approach proposed here, instead of splitting water we are using acetate in wastewater and bacteria to oxidize the acetate into electrons and protons at the anode surface. The microbes release the electrons to the anode and the resulting protons move to the cathode electrode through the proton exchange membrane as described above and recombine to form hydrogen gas. The advantage here is that the required potential is now on the order of 0.25 to 0.8 V, and a considerable savings in electricity is realized to produce the same amount of hydrogen while at the same time removing organic matter from wastewater streams. Significant improvements in current density needs to be made in order for this type of technology to be economically viable

09 BIOMASS FUELS↗