Engineering Papers⌕ Search

Engineering topics

Griego, Jeffrey R

Publications and source records attributed to Griego, Jeffrey R.

ALT-3 Target & CMU Version 4

The third Advance Liner Technology (ALT-3) experiment is the next in a long tradition of collaborations between LANL and RFNC/VNIIEF in high-explosive pulsed-power. Here a VNIIEF provided Disk Explosive Magnetic Generator (DEMG) will drive a LANL provided experimental load and diagnostic package. The objective of the experiment is to explore the use of a cylindrical liner-ontarget in tera-Pascal equation of state measurement. This presentation will discuss version 4 of the experimental target and central measuring unit (CMU) along with R & D already performed in fabrication of the target.

36 MATERIALS SCIENCE↗

RDamage 6, 7, 8 & 9 Cassettes

The RDamage series of ten experiments is part of a long-term collaboration with RFNC/VNIIEF in pulsed power technology. These experiments use a cylindrical configuration to study spallation damage, which allows for a natural recollection of the damaged material under proper driving conditions and post-shot collection of the damaged target material for subsequent metallographic analysis. Dynamic insitu experimental velocimetry diagnostics are also employed. LANL is responsible for the design of the experimental load and velocimetry system. VNIIEF is responsible for the design and construction of the driving explosive magnetic generator. In the RDamage-0, -1 and -2 experiments, data was collected about failure initiation of a well-characterized material (aluminum) in a cylindrical geometry. The RDamage-3, -4 and -5 experiments produced data on the behavior of material recollected after damage from pressures in the damage initiation regime. Data on the behavior of material recollected after complete failure was collected in the RDamage-6, -7, -8 and -9 experiments. This presentation shows the evolution of the load assembly through the experimental series.

36 MATERIALS SCIENCE↗

The quest for TPa Hugoniot data: using the DEMG in high velocity pulsed power experiments

ALT-3 is an experiment being designed in collaboration between Russian VNIIEF scientists and LANL that aims to conduct high velocity material experiments to measure shock velocities at pressures near 1 TPa. The DEMG (Disk Explosive Magnetic Generator) is used to drive >60MA currents to accelerate an aluminum liner to speeds in excess of 20 km/s. The 1-D model of the DEMG has been refined from a given current profile to a time-varying inductance. Various techniques are used to model the FOS (Foil Opening Switch) on the DEMG and a refined DEMG model is then used to drive a liner into various targets to determine the optimum design for the experiment and analyze the possible conditions and complications.

42 ENGINEERING↗

PHELIX for flux compression studies

PHELIX (Precision High Energy-density Liner Implosion eXperiment) is a concept for studying electromagnetic implosions using proton radiography. This approach requires a portable pulsed power and liner implosion apparatus that can be operated in conjunction with an 800 MeV proton beam at the Los Alamos Neutron Science Center. The high resolution (< 100 micron) provided by proton radiography combined with similar precision of liner implosions driven electromagnetically can permit close comparisons of multi-frame experimental data and numerical simulations within a single dynamic event. To achieve a portable implosion system for use at high energy-density in a proton laboratory area requires sub-megajoule energies applied to implosions only a few cms in radial and axial dimension. The associated inductance changes are therefore relatively modest, so a current step-up transformer arrangement is employed to avoid excessive loss to parasitic inductances that are relatively large for low-energy banks comprising only several capacitors and switches. We describe the design, construction and operation of the PHELIX system and discuss application to liner-driven, magnetic flux compression experiments. For the latter, the ability of strong magnetic fields to deflect the proton beam may offer a novel technique for measurement of field distributions near perturbed surfaces.

42 ENGINEERING↗

Precision high energy liner implosion experiments PHELIX [1]

This paper describes the hardware design of a small megajoule sized transformer coupled pulse power system utilized to drive hydrodynamic liner experiments with a nominal current capability of 10 megAmperes. The resulting liner velocities and characteristics provide properties of physics interest. The capacitor banks utilize the ''Atlas'' plastic cased 60 kV, 60 kJ capacitors [2] and railgaps [3]. The air insulated marx'S are configured to dive a multi-filar toroidal transformer. The 4:1 multi-filar toroidal transformer is mechanically part of a circular disc line and this feature results in an attractive inductance budget. Because of the compact size, re-usable transformer, and resulting low maintenance cost, shot rates can be high compared to other ''large'' machines or explosively driven hydrodynamic methods. The PHELIX modeling, construction status, and test results will also be provided.

42 ENGINEERING↗