Engineering PapersSearch

Engineering topics

Greene, Michael E.

Publications and source records attributed to Greene, Michael E..

Ground-based implementation and verification of control laws for tethered satellites

Davis and Banerjee (1990) have developed a tethered-spacecraft system model in which out-of-plane librations are damped, using a length-rate control after the tether has been deployed. Attention is presently given to the implementation of such control schemes to prototype hardware designed for space flight. A prototype reel mechanism has been constructed for use in the Getaway Tether Experiment; both the Davis and Banerjee control scheme and a converted tension-control law have been implemented with tether length and length rate available as feedback.

Gwaltney, David A.

On state estimation for an orbiting single tether system

The effects of instrumentation accuracy and configuration on estimation error are studied for the small expendable-tether deployment system (SEDS) using a continuous-discrete extended Kalman filter (CDEKF) state estimator. A twelfth order model that incorporates the rigid body modes of the tether as well as the satellite attitude dynamics is developed. Simulation results using the model and the estimator indicate that the originally planned instrumentation package could not estimate the state vector adequately. Recommendations are made and results presented that reduce the estimation error by adding instruments and increasing selected measurement accuracies.

Greene, Michael E.

A balloon-borne payload for imaging hard X-rays and gamma rays from solar flares

Hard X-rays and gamma rays provide direct evidence of the roles of accelerated particles in solar flares. An approach that employs a spatial Fourier-transform technique for imaging the sources of these emissions is described, and the development of a balloon-borne imaging device based on this instrumental technique is presented. The detectors, together with the imaging optics, are sensitive to hard X-ray and gamma-ray emission in the energy-range from 20 to 700 keV. This payload, scheduled for its first flight in June 1992, will provide 11-arc second angular resolution and millisecond time resolution with a whole-sun field of view. For subsequent flights, the effective detector area can be increased by as much as a factor of four, and imaging optics with angular resolution as fine as 2 arcsec can be added to the existing gondola and metering structures.

Crannell, Carol J.

The Design of Optical Sensor for the Pinhole/Occulter Facility

Three optical sight sensor systems were designed, built and tested. Two optical lines of sight sensor system are capable of measuring the absolute pointing angle to the sun. The system is for use with the Pinhole/Occulter Facility (P/OF), a solar hard x ray experiment to be flown from Space Shuttle or Space Station. The sensor consists of a pinhole camera with two pairs of perpendicularly mounted linear photodiode arrays to detect the intensity distribution of the solar image produced by the pinhole, track and hold circuitry for data reduction, an analog to digital converter, and a microcomputer. The deflection of the image center is calculated from these data using an approximation for the solar image. A second system consists of a pinhole camera with a pair of perpendicularly mounted linear photodiode arrays, amplification circuitry, threshold detection circuitry, and a microcomputer board. The deflection of the image is calculated by knowing the position of each pixel of the photodiode array and merely counting the pixel numbers until threshold is surpassed. A third optical sensor system is capable of measuring the internal vibration of the P/OF between the mask and base. The system consists of a white light source, a mirror and a pair of perpendicularly mounted linear photodiode arrays to detect the intensity distribution of the solar image produced by the mirror, amplification circuitry, threshold detection circuitry, and a microcomputer board. The deflection of the image and hence the vibration of the structure is calculated by knowing the position of each pixel of the photodiode array and merely counting the pixel numbers until threshold is surpassed.

Greene, Michael E.