Engineering topics

Greene, Michael

Publications and source records attributed to Greene, Michael.

9 records

DOE OSTI2024

Delivery of a Solar-Powered Forward Osmosis Seawater Desalination Plant: Trevi’s 500 m3/day Zero-Carbon FO Seawater Desalination Plant at NELHA

This paper presents an account of Trevi’s delivery of a 500 m3/day solar powered forward osmosis (FO) seawater desalination plant at the Ocean Science and Technology Park of the Natural Energy Laboratory of Hawaii Authority (NELHA). The project aimed to demonstrate the viability of solar thermal-powered desalination for agricultural applications through the integration of a 2MW micro-dish solar thermal array with a state-of-the-art FO system. Highlighted in the paper are the three distinct project phases; Planning and Design, System Construction, Installation & Testing followed finally by System Operation and Optimization. Results and decisions which led to the final plant design will be shared, highlighting how Trevi Systems succeeded in producing a zero-carbon FO seawater desalination plant with a projected Levelized Cost of Water (LCOW) estimate competitive with existing carbon-intensive RO technologies (based on some assumptions and the cost of heat which is required for FO.

14 SOLAR ENERGY↗

NASA NTRS2013

Air Traffic Management Technology Demonstration-1 Concept of Operations (ATD-1 ConOps), Version 2.0

This document is an update to the operations and procedures envisioned for NASA s Air Traffic Management (ATM) Technology Demonstration #1 (ATD-1). The ATD-1 Concept of Operations (ConOps) integrates three NASA technologies to achieve high throughput, fuel-efficient arrival operations into busy terminal airspace. They are Traffic Management Advisor with Terminal Metering (TMA-TM) for precise time-based schedules to the runway and points within the terminal area, Controller-Managed Spacing (CMS) decision support tools for terminal controllers to better manage aircraft delay using speed control, and Flight deck Interval Management (FIM) avionics and flight crew procedures to conduct airborne spacing operations. The ATD-1 concept provides de-conflicted and efficient operations of multiple arrival streams of aircraft, passing through multiple merge points, from top-of-descent (TOD) to the Final Approach Fix. These arrival streams are Optimized Profile Descents (OPDs) from en route altitude to the runway, using primarily speed control to maintain separation and schedule. The ATD-1 project is currently addressing the challenges of integrating the three technologies, and their implantation into an operational environment. The ATD-1 goals include increasing the throughput of high-density airports, reducing controller workload, increasing efficiency of arrival operations and the frequency of trajectory-based operations, and promoting aircraft ADS-B equipage.

Baxley, Brian T.↗

NASA NTRS2012

Air Traffic Management Technology Demonstration-1 Concept of Operations (ATD-1 ConOps)

The operational goal of the ATD-1 ConOps is to enable aircraft, using their onboard FMS capabilities, to fly Optimized Profile Descents (OPDs) from cruise to the runway threshold at a high-density airport, at a high throughput rate, using primarily speed control to maintain in-trail separation and the arrival schedule. The three technologies in the ATD-1 ConOps achieve this by calculating a precise arrival schedule, using controller decision support tools to provide terminal controllers with speeds for aircraft to fly to meet times at a particular meter points, and onboard software providing flight crews with speeds for the aircraft to fly to achieve a particular spacing behind preceding aircraft.

Baxley, Brian T.↗

NASA NTRS1990

Active control of the gamma-ray imaging device (GRID) experiment - A linear adaptive approach

Preliminary results of applying the linear adaptive control techniques of Johnson (1985, 1988) to a pointing system the gamma-ray imaging device (GRID) experiment, are presented. A brief description of the system configuration and modeling efforts is presented along with results of simulation of the primary control tasks. The advantages of the technique include a straightforward design methodology and constant controller parameters.

Walls, Justin↗

NASA NTRS1989

Electrodynamics of the Getaway Tether Experiment

An electrodynamic circuit model of the interaction of a pair of small tethered satellites and the ionosphere is developed and analyzed. The system under study, the Getaway Tether Experiment (GATE), is composed of two small satellites and 1 km of insulated conducting tether. The nonlinear model has elements representing the emission, collection, and resistive flow of charge through an electrically conductive tether, plasma contactors, and the ionosphere. The circuit model is incorporated into a dynamic orbital simulation to predict mission performance. Simulation results show the feasibility to bilaterally transfer energy between stored electrical energy and orbital momentum. A transient model is also developed using the circuit model and a string of N lumped-parameter modules, each consisting of resistance, capacitance, and induced potential for the tether. Transients are shown via simulation to occur over millisecond intervals.

Greene, Michael↗

NASA NTRS1989

GetAway Tether Experiment (GATE) for the Tether Dynamics Explorer (TDE) series

Designs for the GetAway Tether Experiment (GATE) can easily be adapted and applied to the Tether Dynamics Explorer (TDE) series. The GATE development schedule coincides with the planned first flight of the TDE. GATE technology has centered on the development of miniature deployers/actuators, sensors, control laws and simulation capability. The sensors currently under development are a tension sensor and a video based tether tracker. Both sensors are currently undergoing laboratory testing and development. The actuators currently being investigated are a small reel/deployed for active control of the tether and a small tether crawler to damp vibrations of the tether. Laboratory results are presented and the designs reviewed and discussed.

Greene, Michael↗

NASA NTRS1988

Get-Away tether experiment - Experimental plans

The experimental capabilities of the Get-Away Tether Experiment (GATE) are presented and a series of demonstration mission are proposed. The GATE is a free-flying tether system that will develop or demonstrate technology in the areas of tether dynamics (deployment and stabilization, retrieval, stationkeeping, and severance), tether electrodynamics, micrometeor hazards to tethers, and disturbance rejection. The system consists of two subsatellites connected by 1 km of tether. The free-flying system is ejected from the Orbiter via a Getaway Special (GAS) canister. Two dynamics missions are profiled along with a description of electrodynamic mission capabilities. The dynamic interactions of the end body and tether may be observed from the Orbiter or from an on-board video tracking system. Hence, GATE provides a unique, low cost capability to demonstrate various tether technologies, and address critical design and safety issues associated with future tether applications. An assessment of the significant measurable parameters and associated instrumentation is given. Future work and system development projection schedules are also outlined.

Greene, Michael↗

NASA NTRS1988

Simulation and measurement of disturbance propagation in a single tether system

One of the missions of the Getaway Tether Experiment (GATE) is to investigate disturbance propagation and control in a tethered system. In order to understand the nature of the propagation, simulation of the tether response is vital. A single finite duration pulse is the source of the disturbance. A bead model is used to predict the motion of the tether and the end masses (modeled as point masses). System response is checked for different magnitudes of force and for different points of impact on the tether. Along with simulation, hardware development is needed, especially in the area of tension measurement. At this time, hardware is being developed to measure the tension in the tether, so that the tethered system can be controlled via tension feedback. The hardware will then be tested in conjunction with the Dynamics and Control Mission of the GATE project.

Greene, Michael↗

NASA NTRS1987

Robustness of active modal damping of large flexible structures

The method of active modal damping (AMD) is reviewed, and the pinhole/occulter facility (P/OF) is presented as a design example. This system is a large space system composed of a flexible beam, a gimbal-pointing system, and an optical alignment system mounted in the Shuttle cargo bay and excited by typical Shuttle disturbances. The AMD system performance is compared with that of a series-compensated control system.

Greene, Michael↗