Engineering topics

Greeley, Ronald

Publications and source records attributed to Greeley, Ronald.

156 records · Page 9

NASA NTRS1987

Physical and chemical modification of the surface of Venus by windblown particles

The results of simulations of the Venusian surface environment involving windblown grains are presented which show that significant chemical and physical changes may occur even in the slow-moving winds recorded on Venus. The edges of grains beome worn and shed comminuted debris, which collects on weathered surfaces and grains alike. The resulting transfer of material from loose grains to bedrock surfaces (and vice versa) could yield misleading results on rock composition; moreover, the generation of comminuted debris would enhance chemical reactions that could affect the composition of the atmosphere. The results are thus relevant in assessing rates of surface degradation, the evolution of small-scale surface features as seen in images returned from the Soviet Venera missions, and in the interpretation of compositional data for surface materials.

Greeley, Ronald↗

NASA NTRS1987

Development of wind tunnel techniques for the solution of problems in planetary Aeolian processes

Kutzbach reports wind profiles over a series of roughness elements on a frozen lake and how the wind profile changed as the surface roughness was varied. The approach of the current study was to duplicate Kutzbach's roughness arrays in the wind tunnel at 1/20 and 1/40 scales, and to compare the wind profiles over these scale models to those derived by Kutzbach at full scale in the field. The effects of scale differences and data reduction techniques are discussed. Although the study suggests that wind tunnel scale models can predict parameters measured in the field, the development of more definitive guidelines requires a field experiment designed specifically for comparison with wind tunnel results.

Sullivan, Robert↗

NASA NTRS1987

Aeolian abrasion on Venus: Preliminary results from the Venus simulator

The role of atmospheric pressure on aeolian abrasion was examined in the Venus Simulator with a constant temperature of 737 K. Both the rock target and the impactor were fine-grained basalt. The impactor was a 3 mm diameter angular particle chosen to represent a size of material that is entrainable by the dense Venusian atmosphere and potentially abrasive by virtue of its mass. It was projected at the target 10 to the 5 power times at a velocity of 0.7 m/s. The impactor showed a weight loss of approximately 1.2 x 10 to the -9 power gm per impact with the attrition occurring only at the edges. Results from scanning electron microscope analysis, profilometry, and weight measurement are summarized. It is concluded that particles can incur abrasion at Venusian temperatures even with low impact velocities expected for Venus.

Marshall, J. R.↗

NASA NTRS1987

Reynolds number effects on surface shear stress patterns around isolated hemispheres

Obstacles projecting into the wind stream alter the shear stress on the surface around them, thus altering the erosion, transportation, and deposition of aeolian sediment. The effect of Reynolds number on the pattern of shear stress on the surface around an isolated hemisphere was investigated. An understanding of Reynolds number effects is necessary if wind tunnel results are to be scaled up to natural situations for meaningful applications. The experiment shows that the surface shear stress pattern is strongly affected by Reynolds number, at least within the range of Re used (1360 to 2977). This is presumably due to a decrease in flow around the sides of the hemisphere and an increase in flow over the object as the Reynolds number increases.

Lee, J. A.↗

NASA NTRS1987

Determination of surface shear stress with the naphthalene sublimation technique

Aeolian entrainment and transport are functions of surface shear stress and particle characteristics. Measuring surface shear stress is difficult, however, where logarithmic wind profiles are not found, such as regions around large roughness elements. An outline of a method whereby shear stress can be mapped on the surface around an object is presented. The technique involves the sublimation of naphthalene (C10H8) which is a function of surface shear stress and surface temperature. This technique is based on the assumption that the transfer of momentum, heat and mass are analogous (Reynolds analogy). If the Reynolds analogy can be shown to be correct for a given situation, then knowledge of the diffusion of one property allows the determination of the others. The analytical framework and data acquisition for the method are described. The technique was tested in the Planetary Geology Wind Tunnel. Results show that the naphthalene sublimation technique is a reasonably accurate method for determining shear stress, particularly around objects where numerous point values are needed.

Lee, J. A.↗

NASA NTRS1987

Explosive volcanic deposits on Mars: Preliminary investigations

Two investigations were undertaken to examine possible large scale explosive volcanic deposits on Mars. The first includes an analysis of Viking Infrared Thermal Mapper (IRTM) data covering the vast deposits in the Amazonis, Memnonia, and Aeolis regions. These postulated ignimbrites have been previously mapped, and at least five high resolution nighttime IRTM data tracks cross the deposits. Preliminary analysis of the data covering Amazonis Planitia show that local features have anomalous thermal inertias but the ignimbrites as a whole do not consistently have significantly different thermal inertias from their surroundings. Preliminary photogeologic and IRTM studies of the large and small highland paterae have also begun. The purpose of IRTM studies of postulated Martian explosive volcanic deposits is to determine the physical properties of the proposed ignimbrites. If volcanic deposits are exposed at the surface, high thermal inertias, as are observed for Apollinaris Patera, should be present.

Crown, D. A.↗

NASA NTRS1987

Martian volcanism: Festoon-like ridges on terrestrial basalt flows and implications for Mars

The Fink and Fletcher, and Fink model was used to assess and compare flow rheology for two terrestrial basalt flows and one Martian flow with previous studies. Based on the morphologic similarities between the Martian flows and the Icelandic flows and knowledge of the emplacement of the terrestrial flows, the flows west of Arsia Mons are considered to have been emplaced as large sheet flows from basaltic flood style eruptions. Festoon ridges represent folding of the surface crust in the last stages of emplacement when viscosities would be high due to cooling. Alternatively, the lava may have had a high crystallinity or was erupted at low temperatures. In addition, increased compressive stress behind halted flow fronts or in ponded areas may have contributed to ridge formation.

Theilig, E.↗

NASA NTRS1987

Ejecta types on Ganymede and Callisto

Ejecta types on Ganymede and Callisto have been identified from Voyager 1 and 2 images. Image resolution used range from approx. 0.6 to approx. 4 km/pxl, which allowed the surveying of almost all of the mappable surface of the two satellites. Seven ejecta classes were identified on Voyager images of Ganymede on the basis of albedo pattern and type of terminus. The ejecta of different terrains on ejecta characteristics were investigated for the most populated ejecta types. Two major ejecta types were identified on Callisto; both have counterparts on Ganymede. Type C1 has a uniformly high albedo and a sharp terminus. Type C2 has a gradational terminus and a moderate albedo. The similarity in ejecta types on Ganymede and Callisto may indicate similarities in the near surface environment of the two satellites, with different ejecta types representing several possible conditions for the impact environment.

Horner, V. M.↗

NASA NTRS1987

Radar characteristics of small craters - Implications for Venus

Shuttle radar images (SIR-A) of volcanic and impact craters were examined to assess their appearance on radar images. Radar characteristics were determined for (1) nine maarlikie craters in the Pinacate volcanic field, Sonora, Mexico; (2) the caldera of Cerro Volcan Quemado, in the Bolivian Andes; (3) Talemzane impact crater, Algeria; and (4) Al Umchaimin, a possible impact structure in Iraq. SIR-A images were compared with conventional photographs and with results from field studies. Consideration was then given to radar images available for Venus, or anticipated from the Magellan mission. Of the criteria ordinarily used to identify impact craters, some can be assessed with radar images and others cannot be used; planimetric form, expressed as circularity, and ejecta-block distribution can be assessed on radar images, but rim and floor elevations relative to the surrounding plain and disposition of rim strata are difficult or impossible to determine. It is concluded that it will be difficult to separate small impact craters from small volcanic craters on Venus using radar images and is suggested that it will be necessary to understand the geological setting of the areas containing the craters in order to determine their origin.

Greeley, Ronald↗

NASA NTRS1987

MECA Symposium on Mars: Evolution of its Climate and Atmosphere

The geological, atmospheric, and climatic history of Mars is explored in reviews and reports of recent observational and interpretive investigations. Topics addressed include evidence for a warm wet climate on early Mars, volatiles on Earth and on Mars, CO2 adsorption on palagonite and its implications for Martian regolith partitioning, and the effect of spatial resolution on interpretations of Martian subsurface volatiles. Consideration is given to high resolution observations of rampart craters, ring furrows in highland terrains, the interannual variability of the south polar cap, telescopic observations of the north polar cap and circumpolar clouds, and dynamical modeling of a planetary wave polar warming mechanism.

Baker, Victor↗

NASA NTRS1987

The Martian dust cycle: A proposed model

Despite more than a decade of study of martian dust storms, many of their characteristics and associated processes remain enigmatic, including the mechanisms for dust raising, modes of settling, and the nature of dust deposits. However, observations of Mars dust, considerations of terrestrial analogs, theoretical models, and laboratory simulations permit the formulation of a Martian Dust Cycle Model, which consists of three main processes: (1) suspension threshold, (2) transportation, and (3) deposition; two associated processes are also included: (4) dust removal and (5) the addition of new dust to the cycle. Although definitions vary, dust includes particles less than 4 to approx. 60 microns in diameter, which by terrestrial usage includes silt, loess, clay, and aerosolic dust particles. The dust cycle model is explained.

Greeley, Ronald↗

NASA NTRS1972

Additional Observations of Actively Forming Lava Tubes and Associated Structures, Hawaii

Extensive changes occurred after the initial observations (Greeley, 1971) of lava tube and channel formation associated with the eruption of Mauna Ulu. Individual vents, which apparently acted somewhat independently, merged by collapse of intervening sections to form an elongate trench. Lava erupted from the summit vent flowed down the trench to the lower end and drained through lava tubes into Alae lava lake. Alae lava lake is in turn drained occasionally by other lava tubes and lava tube networks.

Greeley, Ronald↗