Engineering Papers⌕ Search

Engineering topics

Gray, Leonard J

Publications and source records attributed to Gray, Leonard J.

Cell Based Volume Integration for Boundary Integral Analysis

The evaluation of volume integrals that arise in boundary integral formulations for non-homogeneous problems is considered. Using the 'Galerkin vector' to represent the Green's function, the volume integral is decomposed into a boundary integral plus a simpler volume integral wherein the source function is everywhere zero on the boundary. This new volume integral can be evaluated using a regular grid of cells covering the domain, with all cell integrals, including partial cells at the boundary, evaluated by simple linear interpolation of vertex values. For grid vertices that lie close to the boundary, the near-singular integrals are handled by partial analytic integration. The method employs a Galerkin approximation and is presented in terms of the 3D Poisson problem. An axi-symmetric formulation is also presented, and in this setting, the solution of a nonlinear problem is considered.

99 GENERAL AND MISCELLANEOUS↗

Axisymmetric boundary integral formulation for a two fluid system

A 3D axisymmetric Galerkin boundary integral formulation for modeling the motion of one inviscid fluid enclosed inside another is described. The interface variables are the velocity potential and the normal velocity, and they can be solved for separately, the second linear system being symmetric. The algorithm is validated by comparing with the analytic solutions for a static interior spherical drop, over a range of values for the relative densities D=rho_E/rho_I of exterior and interior fluids, and various boundary conditions. For time dependent simulations utilizing a Level Set method for the interface tracking, the accuracy has been checked by comparing against the known oscillation frequency of the sphere. Pinch-off profiles corresponding to an initial two lobe geometry drop and D=6 are also presented.

42 ENGINEERING↗

Constructing efficient substructure-based preconditioners for BEM systems of equations

In this work, a generic substructuring algorithm is employed to construct global block-diagonal preconditioners for BEM systems of equations. In this strategy, the allowable fill-in positions are those on-diagonal block matrices corresponding to each BE subregion. As these subsystems are independently assembled, the preconditioner for a particular BE model, after the LU decomposition of all subsystem matrices, is easily formed. So as to highlight the efficiency of the preconditioning proposed, the Bi-CG solver, which presents a quite erratic convergence behavior, is considered. In the particular applications of this paper, 3D representative volume elements (RVEs) of carbon-nanotube (CNT) composites are analyzed. The models contain up to several tens of thousands of degrees of freedom. The efficiency and relevance of the preconditioning technique is also discussed in the context of developing general (parallel) BE codes.

36 MATERIALS SCIENCE↗

Simulation of the droplet to bubble transition in a two fluid system

Recent experiments by Burton and Taborek have demonstrated a droplet to bubble transition in the pinch-off behavior of one inviscid fluid inside another. With D the relative densities D_E/D_I, they find transition from (Rayleigh-Taylor D = 0) droplet to bubble behavior at D 4. Numerical simulations of this two-fluid system, up to and beyond the initial break up of the inner fluid, have been carried out utilizing Level Set and boundary integral methods. A droplet to bubble transition is predicted: for D sufficiently large, the volume of the satellite droplet shrinks to zero and there is no overturning of the fluid at separation. The calculated self-similar scaling exponents and the pinch-off region shapes match the known behaviour at the droplet and bubble extremes (D = 0, D = 100), but for the physical setting presented here the transition occurs in the range 4 < D < 10.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Symmetric-Galerkin boundary element transient analysis of the DSIFs for the interaction of a crack with a circular inclusion

A dynamic analysis of crack-inclusion interaction is described in this paper. The analysis employs a two-dimensional symmetric-Galerkin boundary integral formulation for multi-domain elastodynamic fracture analysis in the frequency domain. The multi-domain technique is based on the assumption of perfectly bonded inclusions. The numerical implementation of this boundary integral formulation is carried out with standard quadratic elements, allowing the use of an improved quarter-point element for accurately determining frequency responses of the dynamic stress intensity factors (DSIFs). To deal with singular and hypersingular integrals, the formulation is decomposed into two parts: the rst part is identical to that for elastostatics while the second part contains at most logarithmic singularities. The treatment of the elastostatic singular and hypersingular singular integrals employs an exterior limit to the boundary, while the weakly singular integrals in the second part are handled by Gauss quadrature. Time histories (transient responses) of the DSIFs are obtained in a post-processing step by applying the fast Fourier transform (FFT) and inverse FFT to the frequency responses of these DSIFs. Two numerical examples are presented for the computation of the DSIFs due to crack-inclusion interaction under two types of impact loading: Heaviside step loading and blast loading. The numerical results are consistent and con rm the well known crack tip shielding mechanism observed during the interaction between a crack and a much stiffer inclusion.

36 MATERIALS SCIENCE↗

Boundary-element parallel-computing algorithm for the microstructural analysis of general composites

A standard continuum-mechanics-based 3D boundary-element (BE) algorithm has been devised to the microstructural modeling of complex heterogeneous solids such as general composites. In the particular applications of this paper, the mechanical properties of carbon-nanotube reinforced composites are estimated from three-dimensional representative volume elements (RVEs). The shell-like thin-walled carbon nanotubes (CNTs) are also simulated with 3D BE models, and a generic subregion-by-subregion (SBS) algorithm makes the microstructural description of the CNT polymer systems possible. In fact, based on this algorithm, a general scalable BE parallel code is proposed. Square and hexagonal fiber-packing patterns are considered to simulate the 3D composite microstructures.

36 MATERIALS SCIENCE↗

On the Implementation of 3D Galerkin Boundary Integral Equations

In this article, a reverse contribution technique is proposed to accelerate the construction of the dense influence matrices associated with a Galerkin approximation of singular and hypersingular boundary integral equations of mixed-type in potential theory. In addition, a general-purpose sparse preconditioner for boundary element methods has also been developed to successfully deal with ill-conditioned linear systems arising from the discretization of mixed boundary-value problems on non-smooth surfaces. The proposed preconditioner, which originates from the precorrected-FFT method, is sparse, easy to generate and apply in a Krylov subspace iterative solution of discretized boundary integral equations. Moreover, an approximate inverse of the preconditioner is implicitly built by employing an incomplete LU factorization. Numerical experiments involving mixed boundary-value problems for the Laplace equation are included to illustrate the performance and validity of the proposed techniques.

97 MATHEMATICS AND COMPUTING↗

Green s Function Expansion for Exponentially Graded Elasticity

New computational forms are derived for the Green s function of an exponentially graded elastic material in three dimensions. By suitably expanding a term in the defining inverse Fourier integral, the displacement tensor can be written as a relatively simple analytic term, plus a single double integral that must be evaluated numerically. The integration is over a fixed finite domain, the integrand involves only elementary functions, and only low order Gauss quadrature is required for an accurate answer. Moreover, it is expected that this approach will allow a far simpler procedure for obtaining the first and second order derivatives needed in a boundary integral analysis. The new Green s function expressions have been tested by comparing with results from an earlier algorithm

97 MATHEMATICS AND COMPUTING↗

Galerkin Boundary Integral Analysis for the 3D Helmholtz Equation

A linear element Galerkin boundary integral analysis for the three-dimensional Helmholtz equation is presented. The emphasis is on solving acoustic scattering by an open (crack) surface, and to this end both a dual equation formulation and a symmetric hypersingular formulation have been developed. All singular integrals are defined and evaluated via a boundary limit process, facilitating the evaluation of the (finite) hypersingular Galerkin integral. This limit process is also the basis for the algorithm for post-processing of the surface gradient. The analytic integrations required by the limit process are carried out by employing a Taylor series expansion for the exponential factor in the Helmholtz fundamental solutions. For the open surface, the implementations are validated by comparing the numerical results obtained by using the two different methods.

99 GENERAL AND MISCELLANEOUS↗

Evaluation of Green's Function Derivatives for Exponentially Graded Elasticity

Effective formulas for computing the Green's function of an exponentially graded three dimensional material have been derived In previous work. The expansion approach for evaluating the Green's function has been extended to develop corresponding algorithms for its first and second order derivatives. The resulting formulas are again obtained as a relatively simple analytic term plus a single double integral, the integrand involving only elementary functions. A primary benefit of the expansion procedure is the ability to compute the second order derivatives needed for fracture analysis. Moreover, as all singular terms in this hypersingular kernel are contained in the analytic expression, these expressions are readily implemented in a boundary integral equation calculation. The computational formulas for the first derivative are tested by comparing with results of finite difference approximations involving the Green's function. In turn, the second derivatives are then validated by comparing with finite difference quotients using the first derivatives.

42 ENGINEERING↗