Engineering Papers⌕ Search

Engineering topics

Graff, Gordon L

Publications and source records attributed to Graff, Gordon L.

27 records · Page 2

Stabilization of Silicon Anode for Li-Ion Batteries

The electrochemical performances of anode consisting of micron-sized Si particles are stabilized by a two-step process. First, the electronic conductivity of the individual silicon particle is enhanced by a uniform carbon coating on its surface and inside the pores via chemical vapor deposition (CVD) process. The deposited amorphous carbon from CVD forms an intimate contact on each silicon particle and enables a stable electronic conductivity. Then the electrical contact between the silicon particles are improved by Ketjenblack (denoted as KB hereafter) carbon with a spring-like chain structure which conforms to the volume change of silicon during cycling. Without ball milling the samples mixed with 30 wt% KB have demonstrated a much better cycling stability than that uses other carbon additives. An excellent cyclability is achieved with a reversible capacity of more than 1600 mAh/g after 30 cycles. Therefore the combination of the amorphous carbon on the silicon surface and the elastic carbon (KB) between the silicon particles provides an effective approach to stabilize Si electrode in the long-term cycling.

36 MATERIALS SCIENCE↗

Synthesis and Screening of Thin Films in the CeCl3-CeBr3 System for Scintillator Applications

Thin film samples of CeCl3, CeBr3, and combinatorial compositions along the CeCl3-CeBr3 join were produced using thermal evaporation, which is being evaluated as a method for rapid screening of new scintillator materials. The combinatorial thin films were shown to be compositionally reproducible from run-to-run within reasonable limitations. Analytical results suggest a continuous variation in the combinatorial samples in terms of their compositions, crystal structures, and luminescence characteristics.

36 MATERIALS SCIENCE↗

Vapor-Induced Solid-Liquid-Solid Process for Silicon-based Nanowire Growth

Silicon based nanowires have been grown from commercial silicon powders under conditions of differing oxygen and carbon activities. Nanowires grown in the presence of carbon sources consisted of a crystalline SiC core with an amorphous SiOx shell. The thickness of SiOx shell decreased as the oxygen concentration in the precursor gases was lowered. Nanowires grown in a carbon-free environment consisted of amorphous silicon oxide with a typical composition of SiO1.8. The growth rate of nanowires decreased with decreasing oxygen content in the precursor gases. SiO1.8 nanowires exhibited an initial discharge capacity of ~ 1,300 mAh/g and better stability than those of silicon powders. A Vapor Induced Solid-Liquid-Solid (VI-SLS) mechanism is proposed to explain the nanowire growth (including silicon and other metal based nanowires) from powder sources. In this approach, both a gas source and a solid powder source are required for nanowire growth. This mechanism is consistent with experimental observations and can also be used to guide the design and growth of other nanowires.

Environmental Molecular Sciences Laboratory↗

Li-Ion Batteries from LiFePO4 Cathode and Anatase/Graphene Composite Anode for Stationary Energy Storage

Li-ion batteries based on LiFePO4 cathode and anatase TiO2/graphene anode were investigated for possible stationary energy storage application. Fine-structured LiFePO4 was synthesized by novel molten surfactant approach. Anatase TiO2/graphene nanocomposite was prepared via self assembly method. The full cell that operated at flat 1.6V demonstrated negligible fade after more than 700 cycles. The LiFePO4/TiO2 combination Li-ion battery is inexpensive, environmentally benign, safe and stable. Therefore, it can be practically applied as stationary energy storage for renewable power sources.

25 ENERGY STORAGE↗

A Combined 6,7Li NMR and Molecular Dynamics Study of Li Diffusion in Li2TiO3

Understanding lithium diffusion properties in electrode materials is important for designing rechargeable lithium-ion batteries with improved performance. In this work, the lithium dynamics in layered Li2TiO3 were characterized using a combination of 6,7Li nuclear magnetic resonance (NMR) over a wide temperature range (150 to 500 K), and molecular dynamics (MD) simulations. The 7Li static NMR and stimulated echo experiments show slow and partial lithium diffusion in Li2TiO3. The high-field (21.1 T) 6Li magic angle spinning NMR shows a new tetrahedral lithium site along with the three crystallographic octahedral sites in Li2TiO3 sample. MD simulations predict that lithium can occupy a tetrahedral site if two or more vacancies exist in the vicinity, which may result, for example, from the presence of a Ti defect in the LiTi2 layer. 6Li two-dimensional (2D) exchange NMR experiments show evidence of lithium diffusion between the pure Li and LiTi2 layers along the c axis. Although the 2D exchange NMR data is not sensitive to lithium diffusion in the ab plane, MD simulations show that lithium diffusion in the pure Li layer is equally probable. Combining these results, a detailed picture of the lithium diffusion pathways in Li2TiO3 is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Chemical Lithium Intercalation into Rutile TiO2 Nanorods

Rutile TiO2 nanorods were synthesized by hydrolysis of TiCl4 followed by a hydrothermal method. Lithium insertion into the rutile nanorods was achieved by a chemical lithium intercalation process. The structural evolution of nano-structured rutile upon lithium intercalation was characterized by several experimental techniques, namely, XRD, TEM and 6Li MAS NMR. The XRD and TEM studies indicate the formation of a new lithium titanate phase (LixTiO2) during lithium intercalation. Additionally, SAED patterns show that the lithium titanate phase has cubic symmetry. Finally, ultra-high magnetic field (21.1T) 6Li MAS NMR reveals that the lithium titanate phase adopts two different structures depending on lithium content. Taken together, the three techniques consistently show that the intercalation of lithium into rutile TiO2 nanorods causes two consecutive structural phase transformations to lithium titanate phases with spinel (Fd m) and rocksalt (Fm m) structures at x=0.46 and 0.88, respectively. In addition, the broad line widths in the 6Li MAS NMR spectrum of the rocksalt phase are indicative of a disordered structure. Density functional theory calculations of the rutile, spinel and rocksalt bulk phases as a function of lithium content corroborate the observed phase transformations. These phase transitions could account for the large irreversible capacity loss of nano-structured rutile anodes observed in electrochemical cycling experiments.

36 MATERIALS SCIENCE↗

Nanostructures and Lithium Electrochemical Reactivity of Lithium Titanites and Titanium Oxides: A Review

Being inherently safe and chemically compatible with the electrolyte, titanium oxidebased materials, including both Li-titanites and various TiO2-polymorphs, are considered alternatives to carbonaceous anodes in Li-ion batteries. Given the commercial success of the spinel lithium titanites, TiO2-polymorphs, in particular in nanostructured forms, have been fabricated and investigated for the applications. Nanostructuring leads to increased reaction areas, shortened Li+ diffusion and potentially enhanced solubility/capacity. Integration with an electron conductive second phase into the TiO2-based nanostructures eases the electron transport, resulting in further improved lithium electrochemical activity and the overall electrochemical performance. This paper reviews structural characteristics and Li-electrochemical reactivity, along with synthetic approaches, of nanostructures and nano-composites based on lithium titanites and TiO2-polymorphs that include rutile, anatase, bronze and brookite.

Li-ion battery, anode, TiO2↗

Oriented Nanostructures for Energy Conversion and Storage

Recently the role of nanostructured materials in addressing the challenges in energy and natural resources has attracted wide attention. In particular, oriented nanostructures have demonstrated promising properties for energy harvesting, conversion and storage. The purpose of the paper is to review the synthesis and application of oriented nanostructures in a few key areas of energy technologies, namely photovoltaics, batteries, supercapacitors and thermoelectrics. Although the applications differ from field to field, one of the fundamental challenges is to improve the generation and transport of electrons and ions. We will first briefly review the several major approaches to attain oriented nanostructured films that are applicable for energy applications. We will then discuss how such controlled nanostructures can be used in photovoltaics, batteries, capacitors, thermoelectrics, and other unconventional ways of energy conversion. We will highlight the role of high surface area to maximize the surface activity, and the importance of optimum dimension and architecture, controlled pore channels and alignment of the nanocrystalline phase to optimize the electrons and ion transport. Finally, the paper will discuss the challenges in attaining integrated architectures to achieve the desired performance. Brief background information will be provided for the relevant technologies, but the emphasis is focused mainly on the nanoeffects of mostly inorganic based materials and devices.

25 ENERGY STORAGE↗

Approaches to Encapsulation of Flexible CIGS Cells

Thin-film solar cells based on CIGS are being considered for large scale power plants as well as building integrated photovoltaic (BIPV) applications. Past studies indicate that CIGS cells degrade rapidly when exposed to moisture. As a result, an effective approach to encapsulation is required for CIGS cells to satisfy the international standard IEC 61646. CIGS modules fabricated for use in large power plants can be encapsulated with glass sheets on the top and bottom surfaces and can be effectively sealed around the edges. In the case of BIPV applications, however, it is desirable to utilize CIGS cells grown on flexible substrates, both for purposes of achieving reduced weight and for cases involving non-flat surfaces. For these cases, approaches to encapsulation must be compatible with the flexible substrate requirement. Even in the case of large power plants, the glass-to-glass approach to encapsulation may eventually be considered too costly. We are investigating encapsulation of flexible CIGS cells by lamination. Sheets of PET or PEN coated with multilayer barrier coatings are used to laminate the flexible cells. Results are discussed for laminated cells from two CIGS manufacturers. In both cases, the cell efficiency decreases less than 10% after 1000 hours of exposure to an environment of 85C/85%RH. This paper discusses these two approaches, reviews results achieved with cells and mini-modules fabricated by the former Shell Solar, Industries (SSI) stressed at 60C/90%RH (60/90), and recent studies of encapsulated IEC cells subjected to an environment of 85ºC/85%RH (85/85).

14 SOLAR ENERGY↗