Engineering Papers⌕ Search

Engineering topics

Goyal, Amit

Publications and source records attributed to Goyal, Amit.

76 records · Page 5

Influence of Oxygen Deficiency on the Out-of-Plane Tilt of Epitaxial Y 2 O 3 Films on Ni-5%W Tapes

We analyzed the crystallographic c-axis tilt of (001) Y 2 O 3 films grown on biaxially textured Ni-5%W tapes under different oxygen flux conditions. We found that different tilting mechanisms were effective in films with different oxygen stoichiometry. Moreover, the structure of the film/substrate interface, investigated by TEM, and the residual strain of the film, investigated by XRD, were also dependent on the film oxygen content. While the oxygen stoichiometric Y 2 O 3 sample exhibited a coherent film/substrate interface and the sharpest out-of-plane texture, the films grown under reduced oxygen pressure exhibited a smaller overall c-axis tilt due to formation of interface dislocations and regions in which the film oxygen vacancies ordered to form a lattice superstructure.

36 MATERIALS SCIENCE↗

Growth of Thick BaZrO 3 -doped YBa 2 Cu 3 O 7-δ Films with High Critical Currents in High Applied Magnetic Fields

High quality, thick YBa 2 Cu 3 O 7- (YBCO) films with splayed self-assembly of BaZrO 3 insulating nanodot columns were epitaxially grown on short pieces of technically important textured metallic templates, ion-beam-assisted deposition (IBAD) MgO substrates by pulsed laser deposition. Variations in superconducting and microstructual properties are observed in the samples grown at different substrate temperatures of 790-810oC. At optimized substrate temperature ranges of 790 and 800oC, the samples were measured to have large self-field I c of 670-787 A/cm at 77 K and minimum Ic of 353-392 A/cm with respect to all angles at 65 K, 3 T respectively.

36 MATERIALS SCIENCE↗

Properties of YBCO on LaMnO3-capped IBAD MgO-templates without Homo-epitaxial MgO layer.

Previously, it has been well established that in an IBAD architecture for coated conductors, (1) LaMnO3 (LMO) buffer layers are structurally and chemically compatible with an underlying homo-epitaxial MgO layer and (2) high current density YBCO films can be grown on these LMO templates. In the present work, the homo-epi MgO layer has been successfully eliminated and a LMO cap layer was grown directly on the IBAD (MgO) template. The performance of the LMO/IBAD (MgO) samples has been qualified by depositing 1 m-thick YBCO coatings by pulsed laser deposition. Electrical transport measurements of YBCO films on the standard (with homo-epi MgO) and simplified (without homo-epi MgO) IBAD architectures were carried out. The angular dependencies of critical current density (Jc) are similar for both IBAD architectures. XRD measurements indicate good, c-axis aligned YBCO films. Transmission electron microscopy (TEM) images reveal that microstructures of YBCO/LMO/IBAD (MgO) and YBCO/LMO/homo-epi MgO/IBAD (MgO) templates are similar. These results demonstrate the strong potential of using LMO as a single cap layer directly on IBAD (MgO) for the development of a simplified IBAD architecture.

36 MATERIALS SCIENCE↗

Enhanced flux pinning in MOCVD-YBCO films through Zr-additions:Systematic feasibility studies

Systematic effects of Zr additions on the structural and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films deposited by metal-organic chemical vapor deposition (MOCVD) have been investigated. Detailed characterization, conducted by coordinated transport, x-ray diffraction, scanning and transmission electron microscopy analyses, and imaging Raman microscopy have revealed trends in the resulting property/performance correlations of these films with respect to varying mole percentages (mol%) of added Zr. For compositions {le} 7.5 mol%, Zr additions lead to improved in-field critical current density, as well as extra correlated pinning along the c-axis direction of the YBCO films via the formation of columnar, self-assembled stacks of BaZrO{sub 3} nanodots.

36 MATERIALS SCIENCE↗