Engineering topics
Goodenough, John B.
Publications and source records attributed to Goodenough, John B..
Interphase Stabilization of LiNi 0.5 Mn 1.5 O 4 Cathode for 5 V–Class All–Solid–State Batteries
Employing high voltage cobalt-free spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) as a cathode is promising for high energy density and cost-effectiveness, but it has challenges in all-solid-state batteries (ASSBs). Here, it is revealed that the limitation of lithium argyrodite sulfide solid electrolyte (Li 6 PS 5 Cl) with the LNMO cathode is due to the intrinsic chemical incompatibility and poor oxidative stability. Through a careful analysis of the interphase of LNMO, it is elucidated that even the halide solid electrolyte (Li 3 InCl 6 ) with high oxidative stability can be decomposed to form resistive interphase layers with LNMO in ASSBs. Interestingly, with Fe-doping and a Li 3 PO 4 protective layer coating, LNMO with Li 3 InCl 6 displays stable cycle performance with a stabilized interphase at a high voltage (≈4.7 V) in ASSBs. The enhanced interfacial stability with the extended electrochemical stability window through doping and coating enables high electrochemical stability with LNMO in ASSBs. Furthermore, this work provides guidance for employing high-voltage cathodes in ASSBs and highlights the importance of stable interphases to enable stable cycling in ASSBs.
Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode
All-solid-state batteries with sulfide electrolytes and high-nickel layered oxide cathodes attract much interest due to their high specific energy. However, their cycling performance is primarily influenced by the interface between the sulfide electrolyte and the high-Ni layered oxide particles, which requires the use of composite cathodes with high ionic and electronic conductivities to achieve a kinetically stable interface inside the cathode. Here, we apply Ti 2 O 3 particles to the high-Ni cathode LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), where Ti 2 O 3 not only acts as an electronic conductor to provide a fast diffusion path for electrons in the composite cathode, but also absorbs the lattice oxygen released from NCM811 cathode during cycling, stabilizing the Li 6 PS 5 Cl/NCM811 interface and suppressing electrolyte oxidation. The as-modified cathode exhibits an initial specific capacity of 192 mAh g -1 and retains 166 mAh g -1 after 140 cycles at 0.1C rate with a good capacity retention of 86.5%. Furthermore, the composite cathode displays high rate capability even at 1C rate. By contrast, the unmodified Li 6 PS 5 Cl/NCM811 cathode shows poor cycling performance with only 130 mAh g -1 remaining after 130 cycles. This work provides a new direction for the design of cathodes for all-solid-state batteries that can deliver high specific energy with long cycle life.
Ultra‐Thin Single‐Particle‐Layer Sodium Beta‐Alumina‐Based Composite Polymer Electrolyte Membrane for Sodium‐Metal Batteries
Inorganic/organic composite polymer electrolytes (CPEs) with good flexibility and electrode contact have been pursued for solid-state sodium-metal batteries. However, the application of CPEs for high energy density solid-state sodium-metal batteries is still limited by the low Na + conductivity, large thickness, and low ion transference number. Herein, an ultra-thin single-particle-layer (UTSPL) composite polymer electrolyte membrane with a thickness of ≈20 µm straddled by a sodium beta-alumina ceramic electrolyte (SBACE) is presented. A ceramic Na + -ion electrolyte that bridges or percolates across an ultra-thin and flexible polymer membrane provides: 1) the strength and flexibility from the polymer membrane, 2) excellent electrolyte/electrode interfacial contact, and 3) a percolation path for Na + -ion transfer. Owing to this novel design, the obtained UTSPL-35SBACE membrane exhibits a high Na+-ion conductivity of 0.19 mS cm -1 and a transference number of 0.91 at room temperature, contributing to long-term cycling stability of symmetric sodium cells with a small overpotential. The assembled quasi-solid-state cell with the as-prepared UTSPL-35SBACE membrane displays superior cycling performance with a discharge capacity of 105 mAh g -1 at 0.5 °C rate after 100 cycles and excellent rate performance (82 mAh g -1 at 5 °C rate) at room temperature with the potassium manganese hexacyanoferrate (KMHCF)@CNTs/CNFs cathode, where KMHCF refers to potassium manganese hexacyanoferrate.
Li 2 S 6 ‐Integrated PEO‐Based Polymer Electrolytes for All‐Solid‐State Lithium‐Metal Batteries
Abstract The integration of Li 2 S 6 within a poly(ethylene oxide) (PEO)‐based polymer electrolyte is demonstrated to improve the polymer electrolyte's ionic conductivity because the strong interplay between O 2− (PEO) and Li + from Li 2 S 6 reduces the crystalline volume within the PEO. The Li/electrolyte interface is stabilized by the in situ formation of an ultra‐thin Li 2 S/Li 2 S 2 layer via the reaction between Li 2 S 6 and lithium metal, which increases the ionic transport at the interface and suppresses lithium dendrite growth. A symmetric Li/Li cell with the Li 2 S 6 ‐integrated composite electrolyte has excellent cyclability and a high critical current density of 0.9 mA cm −2 at 40 °C. Impressive electrochemical performance is demonstrated with all‐solid‐state Li/LiFePO 4 and high‐voltage Li/LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells at 40 °C.
Li 2 S 6 ‐Integrated PEO‐Based Polymer Electrolytes for All‐Solid‐State Lithium‐Metal Batteries
Abstract The integration of Li 2 S 6 within a poly(ethylene oxide) (PEO)‐based polymer electrolyte is demonstrated to improve the polymer electrolyte's ionic conductivity because the strong interplay between O 2− (PEO) and Li + from Li 2 S 6 reduces the crystalline volume within the PEO. The Li/electrolyte interface is stabilized by the in situ formation of an ultra‐thin Li 2 S/Li 2 S 2 layer via the reaction between Li 2 S 6 and lithium metal, which increases the ionic transport at the interface and suppresses lithium dendrite growth. A symmetric Li/Li cell with the Li 2 S 6 ‐integrated composite electrolyte has excellent cyclability and a high critical current density of 0.9 mA cm −2 at 40 °C. Impressive electrochemical performance is demonstrated with all‐solid‐state Li/LiFePO 4 and high‐voltage Li/LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells at 40 °C.
Rationally Designed PEGDA–LLZTO Composite Electrolyte for Solid-State Lithium Batteries
Not provided.
Ionic Liquid (IL) Laden Metal–Organic Framework (IL-MOF) Electrolyte for Quasi-Solid-State Sodium Batteries
Not provided.
Elevating Energy Density for Sodium-Ion Batteries through Multielectron Reactions
Not provided.