Engineering topics
Publications and source records attributed to Goldowsky, M..
Magnetic bearings and noncontacting seals let cooler operate unattended at 65 K for more than 3 years. New cooler uses magnetic bearings, small piston/cylinder clearance seals, and linear motors. Cooler consists of compression and expansion sections connected end-to-end. Compression section houses reciprocating hollow piston driven by linear motor.
This paper described a novel Stirling cycle cryogenic refrigerator which was designed, fabricated and successfully tested at Philips Laboratories. The prominent features of the machine are an electro-magnetic bearing system, a pair of moving magnet linear motors, and clearance seals with a 25 mu m radial gap. The all-metal and ceramic construction eliminates long-term organic contamination of the helium working fluid. The axial positions of the piston and displacer are electronically controlled, permitting independent adjustment of the amplitude of each and their relative phase relationship during operation. A simple passive counterbalance reduces axial vibrations. The design of the refrigerator system components is discussed and a comparison is made between performance estimates and measured results.
Magnetic shaft bearing employs electromagnets energized by signals related to shaft position and velocity. Electromagnets are arranged in orthogonal pairs. Axial and rotational shaft motions are accomodated, and lateral motions are restrained. Axial motion can also be restrained. Self-regulating bearing includes velocity and position control.
A new approach to the development of a 3- to 5-year lifetime Stirling cycle refrigerator for space is described. The reciprocating components would be driven directly by linear motors. There would be no contact between the moving components and the machine housing or motor during operation. The noncontact operation can be achieved either by magnetic or gas bearings and clearance seals. Consequently, two major contractual efforts are underway, one to develop the magnetic-bearing cooler and the other to develop the gas-bearing machine. The coolers are required to have a 5-W capability at 65 K and to be dynamically balanced. The results of the major contractor phase 1 design definition studies and component testing are discussed. Both the gas-bearing and magnetic-bearing coolers show promise for achieving the 3- to 5-year lifetime goal.