Engineering Papers⌕ Search

Engineering topics

Godfrey, Andrew

Publications and source records attributed to Godfrey, Andrew.

51 records · Page 3

VERA Core Physics Benchmark Progression Problem Results for VERA 3.6

This report contains a comparison of results obtained with VERA 3.6 Release Candidate 0 for the Core Physics Benchmark Progression Problems 1 through 9 to both computational tools and measured data from Watts Bar Unit 1 (WBN1). (Ref. 1 and Ref. 2) These problems progress from single pin cell analyses to full core depletion calculations. VERA results obtained for Problems 1 through 5 are compared against results obtained using the SCALE 6.2 Beta code KENO-VI. Results for Problem 6 and 7 are compared against those obtained using a coupled neutronic and thermal-hydraulic combination of the KAPL software MC21 and the CASL tool CTF. (Ref. 3, Ref. 4 and Ref. 5) VERA results from problems 5 and 9 are compared to data from WBN1. For all of the analyses contained in this report, VERA provided similar results to other state-of-the-art software programs and real reactor data. This indicates that the program is capable of modeling a full-scale PWR in a more discretized and computationally efficient manner than any other reactor physics program. Since the descriptions of the Core Physics Benchmark Progression Problems and the logic behind their selection is discussed in-depth elsewhere it is not covered in the scope of this document. Additionally, in-depth discussions of the software programs used in this analysis are not provided for the same rationale.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Direct observation of nucleation in the bulk of an opaque sample

Remarkably little is known about the physical phenomena leading to nucleation of new perfect crystals within deformed metals during annealing, in particular how and where volumes with nearly perfect lattices evolve from structures filled with dislocations, and how local variations at the micrometer length scale affect this nucleation process. We present here the first experimental measurements that relate directly nucleation of recrystallization to the local deformation microstructure in the bulk of a sample of cold rolled aluminum, further deformed locally by a hardness indentation. White beam differential aperture X-ray microscopy is used for the measurements, allowing us to map a selected gauge volume in the bulk of the sample in the deformed state, then anneal the sample and map the exact same gauge volume in the annealed state. It is found that nuclei develop at sites of high stored energy and they have crystallographic orientations from those present in the deformed state. Accordingly we suggest that for each nucleus the embryonic volume arises from a structural element contained within the voxels identified with the same orientation. In conclusion, possible nucleation mechanisms are discussed and the growth potentials of the nuclei are also analyzed and discussed.

36 MATERIALS SCIENCE↗

VERA Core Simulator methodology for pressurized water reactor cycle depletion

This paper describes the methodology developed and implemented in the Virtual Environment for Reactor Applications Core Simulator (VERA-CS) to perform high-fidelity, pressurized water reactor (PWR), multicycle, core physics calculations. Depletion of the core with pin-resolved power and nuclide detail is a significant advance in the state of the art for reactor analysis, providing the level of detail necessary to address the problems of the U.S. Department of Energy Nuclear Reactor Simulation Hub, the Consortium for Advanced Simulation of Light Water Reactors (CASL). VERA-CS has three main components: the neutronics solver MPACT, the thermal-hydraulic (T-H) solver COBRA-TF (CTF), and the nuclide transmutation solver ORIGEN. This paper focuses on MPACT and provides an overview of the resonance self-shielding methods, macroscopic-cross-section calculation, two-dimensional/one-dimensional (2-D/1-D) transport, nuclide depletion, T-H feedback, and other supporting methods representing a minimal set of the capabilities needed to simulate high-fidelity models of a commercial nuclear reactor. Results are presented from the simulation of a model of the first cycle of Watts Bar Unit 1. The simulation is within 16 parts per million boron (ppmB) reactivity for all state points compared to cycle measurements, with an average reactivity bias of <5 ppmB for the entire cycle. Comparisons to cycle 1 flux map data are also provided, and the average 2-D root-mean-square (rms) error during cycle 1 is 1.07%. To demonstrate the multicycle capability, a state point at beginning of cycle (BOC) 2 was also simulated and compared to plant data. The comparison of the cycle 2 BOC state has a reactivity difference of +3 ppmB from measurement, and the 2-D rms of the comparison in the flux maps is 1.77%. Lastly, these results provide confidence in VERA-CS’s capability to perform high-fidelity calculations for practical PWR reactor problems.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Stability and accuracy of 3D neutron transport simulations using the 2D/1D method in MPACT

A consistent “2D/1D” neutron transport method is derived from the 3D Boltzmann transport equation, to calculate fuel-pin-resolved neutron fluxes for realistic full-core Pressurized Water Reactor (PWR) problems. The 2D/1D method employs the Method of Characteristics to discretize the radial variables and a lower order transport solution to discretize the axial variable. This paper describes the theory of the 2D/1D method and its implementation in the MPACT code, which has become the whole-core deterministic neutron transport solver for the Consortium for Advanced Simulations of Light Water Reactors (CASL) core simulator VERA-CS. Several applications have been performed on both leadership-class and industry-class computing clusters. Results are presented for whole-core solutions of the Watts Bar Nuclear Power Station Unit 1 and compared to both continuous-energy Monte Carlo results and plant data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

VERA Benchmarking Results for Watts Bar Nuclear Plant Unit 1 Cycles 1-12

Among the most important accomplishments during Phase 1 of the Consortium for Advanced Simulation of Light Water Reactors (CASL) is the development and deployment of what is known as VERA-CS, the steady-state nuclear reactor core simulation capability of the Virtual Environment for Reactor Applications, VERA. With this product CASL now has the ability to perform and support analyses relating to common evolutions of operating commercial pressurized water reactors (PWRs), including startup testing, power escalation, fuel cycle depletion, and fuel assembly discharge, reinsert, and shuffling. VERA-CS is a high-fidelity, multi-physics engineering tool that utilizes modest high-performance computing (HPC) systems and engineering-scale clusters to simultaneously simulate the local fuel rod neutronics and coolant channel thermal-hydraulics over the life of the reactor. Though it is still under development, the results demonstrated in this report provide encouraging evidence that VERA-CS will become highly acclaimed for industrial, scientific, and educational applications alike.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Validate VERA-CS using the industry standard BEAVRS Cycle Depletion Benchmark Problem

VERA-CS is the core simulator component of VERA which includes 3 main components; MPACT for neutron transport/reactor physics, COBRA-TF for thermal-hydraulics, and ORIGEN for time dependent isotopics. These three components have each undergone individual validation but there is also a need to validate the coupled codes. This work aims to build on the validation basis of VERA-CS using the BEAVRS Benchmark which was released by MIT in 2013.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MPACT Theory Manual Version 2.0.0

This theory manual describes the three-dimensional (3-D) whole-core, pin-resolved transport calculation methodology employed in the MPACT code. To provide sub-pin level power distributions with sufficient accuracy, MPACT employs the method of characteristics (MOC) solutions in the framework of a 3-D coarse mesh finite difference (CMFD) formulation. MPACT provides a 3D MOC solution, but also a 2D/1D solution in which the 2D planar solution is provided by MOC and the axial coupling is resolved by one-dimensional (1-D) lower order (diffusion or P3) solutions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MPACT User's Manual (Version 2.0.0)

The MPACT (Michigan PArallel Charactistics based Transport) code is designed to perform high-fidelity light water reactor (LWR) analysis using whole-core pin-resolved neutron transport calculations on modern parallel-computing hardware. The code consists of several libraries which provide the functionality necessary to solve steady-state eigenvalue problems. Several transport capabilities are available within MPACT including both 2-D and 3-D Method of Characteristics (MOC). A three-dimensional whole core solution based on the 2D-1D solution method provides the capability for full core depletion calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

VERA-CS Validation Plan

The VERA core simulator, VERA-CS, provides the capability for steady-state reactor core simulation for operating nuclear power plant (PWR) conditions across multiple fuel cycles. This capability parallels that of industry core simulators which are typically licensed by the NRC for core design, core surveillance/monitoring activities, and safety-related calculations that support accident analyses. The licensing basis for these codes for these applications is a rigorous process of validating the software against measured data and quantifying the resulting biases and uncertainties. This document provides an initial plan for performing similar activities with VERA-CS, in a manner consistent with benchmarking activities performed in the nuclear industry.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

VERAOUT - VERA HDF5 Output Specification (Revision 1)

This document describes the revised specification (Revision 1) for the format of the common VERA Output file (VERAOUT). VERAOUT is a binary HDF5 file that all of the physics codes in VERA-CS produce. Having all physics codes write to a single file simplifies post-processing and data comparison. The edits and format written to the VERAOUT file is described below. This specification covers common scalar and array data typically produced by neutronic and fuel performance codes. This document will be periodically revised to add additional data as more physics codes and/or more data is added to VERA-CS. A version number is written to the HDF file to keep track of different versions of the VERAOUT so that backwards compatibility may be maintained. A sample VERAOUT reader has been written to serve as an example for users wishing to do data postprocessing. Information on this program is included below.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of Two-Dimensional Lattice Physics Verification Problems with MPACT

CASL is developing the Virtual Environment for Reactor Applications (VERA) as a key capability to support the analysis of the CASL Challenge Problems. VERA will include a range of physics modeling capabilities necessary to model reactors, including neutronics, thermal hydraulics, fuel performance, coolant chemistry, with development efforts underway in all of these areas. This report documents the application of the lattice physics capability available in MPACT v1.0.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Plastic deformation of submicron-sized crystals studied by in-situ Kikuchi diffraction and dislocation imaging

The plastic deformation of submicron-size copper single crystals in the form of pillars has been characterized during in-situ compression in the transmission electron microscope up to strains of 28-33% using a state-of-the-art holder (PI-95 PicoIndenter). The dimensions of the crystals used were approx. 500 Multiplication-Sign 250 Multiplication-Sign 200 nm{sup 3} with the compression axis oriented 1.6 Degree-Sign from [110]. Local crystallographic orientations have been determined with high accuracy using a Kikuchi diffraction method and glide of dislocations over a pillar has also been observed directly by dark field imaging. The variation in the local orientation during deformation has been followed by in-situ convergent beam electron Kikuchi diffraction. The in-situ observations have been followed up by post-deformation measurements with the samples still mounted in the electron microscope. Crystal breakup following localized deformation was observed in two of three crystals examined, and for all crystals the direction of rotation during deformation is in agreement with slip taking place on a subset of the four slip systems, with the highest Schmid factors on the (111) and (- 1-11) slip planes. A diffraction-based Burgers vector analysis confirms that the active dislocations are from slip systems with the highest Schmid factors. These results from testing of micropillars are in good agreement with the deformation behaviour previously reported for both single- and poly-crystal samples with dimensions in the millimetre range. - Highlights: Black-Right-Pointing-Pointer We performed in-situ plastic deformation of submicron-sized copper single crystals. Black-Right-Pointing-Pointer We measured in-situ and ex-situ crystal rotation and imaged dislocation activities. Black-Right-Pointing-Pointer We measured crystallographic orientations and analyzed dislocation Burgers vectors. Black-Right-Pointing-Pointer Crystals' rotation in agreement with slip of dislocations with highest Schmid factor. Black-Right-Pointing-Pointer These results in good agreement with millimeter-scale samples' deformation behavior.

36 MATERIALS SCIENCE↗

IC Workflow Project (Final Report)

The Workflow Project is a joint research task between the CASL Advanced Modeling Applications (AMA) and the Virtual Reactor Integration (VRI) focus areas, and the Industry Council. The purpose of the project is to solicit the expertise of the IC member organizations to inform CASL staff and provide feedback for the development of CASL products. The goal is for CASL staff to understand existing workflows at end-user organizations in order to achieve compatibility of CASL products with current needs and future plans. CASL is committed to developing and delivering advanced capabilities and solutions that will allow the nuclear power industry to solve complex problems and improve the operating performance and efficiency of light water reactors. Through the R&D being performed by CASL, advanced computational methods and software is being developed and embodied in the Virtual Environment for Reactor Applications (VERA). The information collected through this project will provide additional considerations that must be included in the development of VERA to ensure that it meets the needs of the nuclear industry. As will be discussed below, key additional areas that must be considered is the usability of the system in an engineering environment including the user input, quality assurance, output of results, computational runtime, and integration into existing engineering analysis processes. This document contains a summary of information gathered through a series of interviews and meetings with IC organizations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Evolution of cementite morphology in pearlitic steel wire during wet wire drawing

The evolution of the cementite phase during wet wire drawing of a pearlitic steel wire has been followed as a function of strain. Particular attention has been given to a quantitative characterization of changes in the alignment and in the dimensions of the cementite phase. Scanning electron microscope observations show that cementite plates become increasingly aligned with the wire axis as the drawing strain is increased. Measurements in the transmission electron microscope show that the cementite deforms plastically during wire drawing , with the average thickness of the cementite plates decreasing from 19 nm ({epsilon} = 0) to 2 nm ({epsilon} = 3.7) in correspondence with the reduction in wire diameter. The deformation of the cementite is strongly related to plastic deformation in the ferrite, with coarse slip steps, shear bands and cracks in the cementite plates/particles observed parallel to either {l_brace}110{r_brace}{sub {alpha}} or {l_brace}112{r_brace}{sub {alpha}} slip plane traces in the ferrite.

36 MATERIALS SCIENCE↗