Engineering Papers⌕ Search

Engineering topics

Glugla, M.

Publications and source records attributed to Glugla, M..

Micro-channel catalytic reactor integration in CAPER and research/development on highly tritiated water handling and processing

The CAPER facility of the Tritium Laboratory Karlsruhe has demonstrated the technology for the tokamak exhaust processing. CAPER has been significantly upgraded to pursue research/development programs towards highly tritiated water (HTW) handling and processing. The preliminary tests using a metal oxide reactor producing HTW afterward de-tritiated with PERMCAT were successful. In a later stage, a micro-channel catalytic reactor was installed in view of long term research program on HTW. The integration of this new system in CAPER was carried out along with a careful safety analysis due to high risk associated with such experiments. First experiments using the μ-CCR were performed trouble free, and HTW up to 360 kCi/kg was produced at a rate of 0.5 g/h. Such HTW was collected into a platinum zeolite bed (2 g of HTW for 20 g of Pt-zeolite), and in-situ detritiation was performed via isotopic exchange with deuterium. These first experimental results with tritium confirmed the potential for the capture and exchange method to be used for HTW in ITER. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Capture and isotopic exchange method for water and hydrogen isotopes on zeolite catalysts up to technical scale for pre-study of processing highly tritiated water

Highly tritiated water (HTW) may be generated at ITER by various processes and, due to the excessive radio toxicity, the self-radiolysis and the exceedingly corrosive property of HTW, a potential hazard is associated with its storage and process. Therefore, the capture and exchange method for HTW utilizing Molecular Sieve Beds (MSB) was investigated in view of adsorption capacity, isotopic exchange performance and process parameters. For the MSB, different types of zeolite were selected. All zeolite materials were additionally coated with platinum. The following work comprised the selection of the most efficient zeolite candidate based on detailed parametric studies during the H{sub 2}/D{sub 2}O laboratory scale exchange experiments (about 25 g zeolite per bed) at the Tritium Laboratory Karlsruhe (TLK). For the zeolite, characterization analytical techniques such as Infrared Spectroscopy, Thermogravimetry and online mass spectrometry were implemented. Followed by further investigation of the selected zeolite catalyst under full technical operation, a MSB (about 22 kg zeolite) was processed with hydrogen flow rates up to 60 mol*h{sup -1} and deuterated water loads up to 1.6 kg in view of later ITER processing of arising HTW. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly tritiated water processing by isotopic exchange

Highly tritiated water (HTW) is produced in fusion machines and one of the promising technologies to process it is isotopic exchange. 3 kinds of Pt-catalyzed zeolite (13X-APG, CBV-100-CY and HiSiv-1000) were tested as candidates for isotopic exchange of highly tritiated water (HTW), and CBV-100-CY (Na-Y type with a SiO{sub 2}/Al{sub 2}O{sub 3} ratio of ∼ 5.0) shows the best performance. Small-scale tritium testing indicates that this method is efficient for reaching an exchange factor (EF) of 100. Full-scale non-tritium testing implies that an EF of 300 can be achieved in 24 hours of operation if a temperature gradient is applied along the column. For the isotopic exchange, deuterium recycled from the Isotope Separation System (deuterium with 1% T and/or 200 ppm T) should be employed, and the tritiated water regenerated from the Pt-catalyzed zeolite bed after isotopic exchange should be transferred to Water Detritiation System (WDS) for further processing.

36 MATERIALS SCIENCE↗

Disruption Mitigation Technology Concepts and Implications for ITER

Disruptions on ITER present challenges to handle the intense heat flux, the large forces from halo currents, and the potential first wall damage from energetic runaway electrons. Injecting large quantities of material into the plasma during the disruption can reduce the plasma energy and increase its resistivity to mitigate these effects. Assessments of the amount of various mixtures and quantities of material required have been made to provide collision mitigation of runaway electron conversion [1], which is the most difficult challenge. The quantities of material required (~0.5 MPa-m3 for deuterium or helium gas) are large enough to have implications on the design and operation of the vacuum system and tokamak exhaust processing system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Disruption Mitigation Technology Concepts and Implications for ITER

Disruptions on ITER present challenges to handle the intense heat flux, the large forces from halo currents, and the potential first wall damage from energetic runaway electrons. Injecting large quantities of material into the plasma during the disruption can reduce the plasma energy and increase its resistivity to mitigate these effects. Assessments of the amount of various mixtures and quantities of material required have been made to provide collision mitigation of runaway electron conversion [1] which is the most difficult challenge. The quantities of material required (~0.5 MPa-m3 for deuterium or helium gas) are large enough to have implications on the design and operation of the vacuum system and tokamak exhaust processing system.

Baylor, Larry R↗

Effect of radiogenic helium on stainless steel 12Cr18Ni10Ti structural changes and hydrogen sorption

The tritium trick technique was used to build-up radiogenic helium inside stainless steel 12Cr18Ni10Ti (SS). A great quantity of defects with a mean diameter of 20 nm, most probably platelet-like bubbles with {sup 3}He atoms, was observed in {sup 3}He-containing samples. The mean density of these bubbles in SS samples containing {approx}75 appm of {sup 3}He is estimated to be 6x10{sup 20} m{sup -3}. Much larger helium bubbles were observed in SS after annealing the samples at T {>=}1170 K. Thermal release of radiogenic helium occurs at T and >1500 K The presence of {sup 3}He in structural materials causes the formation of an additional state for hydrogen sorption. (authors)

36 MATERIALS SCIENCE↗

ITER design review: Tritium issues

One of the key activities on ITER during 2007 is a Design Review covering selected high priority areas of the project in which a significant number of features of the design with the potential to compromise the achievement of some objectives of ITER have been identified. These issues are being addressed by a number of focussed working groups to develop solutions for these issues which will enhance operating margins, reliability and availability, and ensure compliance with the French licensing framework. One of the working groups has been set up to investigate tritium-related issues. The principal design features which are being addressed by this group and the proposed resolutions of these issues are described in the paper. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uncertainty assessment and analysis of ITER in-VV tritium inventory determination

Tracking of tritium inventories on ITER will be essential to ensure that the safety limits established for the mobilizable tritium inventory in the vacuum vessel are not violated. Tritium will be delivered to the ITER site from outside suppliers. Staring with the tritium imports the value of tritium inventory at ITER site will be known with a certain error that will propagate in time. During plasma operation, shot by shot measurements of the tritium delivered to the Torus and recovered will allow the amount of tritium trapped in the Torus to be computed at the end of the day. A case study for different measuring techniques and several measuring points for the tritium recovered from Torus have been done. An alternative method is to measure overnight the variation in the inventory of the storage and delivery system and the associated error when this method will be employed are presented. In order to reduce the errors on the tritium trapped in-vessel, at certain time intervals a method of global tritium inventory will be performed. The method envisages the transfer of all the mobilizable tritium from the plant and measurement of this inventory in the self-assay beds from the storage and delivery system. Evaluation of the most important sources of error for the tritium trapped in-vessel and means of minimization are eventually presented. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tritium processing tests for the validation of upgraded PERMCAT mechanical design

The PERMCAT process, chosen for the final clean-up stage of the Tritium Exhaust Processing system in ITER, directly combines a Pd/Ag membrane and a catalyst bed for the detritiation of gaseous mixtures containing molecular and chemically bound tritium. Upgraded PERMCAT mechanical designs have been proposed to both increase the robustness and simplify the design of the reactor. One uses a special corrugated Pd/Ag membrane able to withstand change in length of the membrane during both normal operation and in the case of off-normal events. Based on this design, an upgraded PERMCAT reactor has been produced at FZK and successfully tested at TLK with ITER relevant tritiated gaseous mixtures using the CAPER facility. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance of a full-scale ITER metal hydride storage bed in comparison with requirements

The storage of hydrogen isotopes as metal hydride is the technique chosen for the ITER Tritium Plant Storage and Delivery System (SDS). A prototype storage bed of a full-scale has been designed, manufactured and intensively tested at the Tritium Laboratory, addressing main performance parameters specified for the ITER application. The main requirements for the hydrogen storage bed are a strict physical limitation of the tritium storage capacity (currently 70 g T{sub 2}), a high supply flow rate of hydrogen isotopes, in-situ calorimetry capabilities with an accuracy of 1 g and a fully tritium compatible design. The pressure composition isotherm of the ZrCo hydrogen system, as a reference material for ITER, is characterised by significant slope. As a result technical implementation of the ZrCo hydride bed in the SDS system requires further considerations. The paper presents the experience from the operation of ZrCo getter bed including loading/de-loading operation, calorimetric loop performance, and active gas cooling of the bed for fast absorption operation. The implications of hydride material characteristics on the SDS system configuration and design are discussed. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tritium in fusion: R and D in the EU

Tritium as one of the two fuel components for fusion power plays a special role in any fusion device. Due to its volatile character, radioactivity and easy incorporation as HTO it needs to be controlled with special care and due to its scarcity on earth it has to be produced in-situ in future fusion power plants. The paper discusses the present tritium R and D activities in fusion ongoing in the EU and presents the various processes/techniques envisaged for controlling tritium in future fusion reactors focusing mainly on the issues of breeding blankets and the fuel cycle in DEMO. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tritium processing loop for KATRIN experiment

The design of tritium processing loop for KATRIN tritium source supported by high purity of tritium has been demonstrated. The demonstration has showed tritium beta spectrum using a high energy resolution electrostatic spectrometer with adiabatic magnetic collimation. The demonstration proved that the systematic uncertainties in KATRIN can cause the use of a windowless gaseous tritium source (WGTS) as the main beta source. The tritium processing system (TPS) involves an inner loop providing the circulation of tritium through WGTS and control of isotope composition of the circulating gas. The demonstration compress and purify the pumped tritium by TPS and returned back to the source. The processing capability of the system in the demonstration kept on the level of 40 gram of tritium per day. The demonstration proved that the system can fulfil the requirements of KATRIN project with stable circulation of pure tritium. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

A decade of tritium technology development and operation at the tritium laboratory Karlsruhe

The Tritium Laboratory Karlsruhe (TLK) has been designed to handle relevant amounts of tritium for the development of tritium technology for fusion reactors. This paper describes the tritium technology development and experience gained during the upgrade of facilities, interventions, replacement of failed components and operation of the TLK since its commissioning with tritium in 1994. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of radiogenic helium on stainless steel 12Cr18Ni10Ti mechanical properties and hydrogen permeability

Samples of stainless steel 12Cr18Ni10Ti with radiogenic helium were subjected to mechanical tests with a constant extension rate. The presence of {sup 3}He does not markedly affect the strength characteristic, but significantly decreases plasticity of steel. The presence of hydrogen enhances the embrittlement of steel, containing {sup 3}He. The diffusion coefficient of hydrogen does not change significantly in the presence of helium, but the traps for hydrogen, which occur due to the presence of helium, delay the kinetics of a steady state flux onset at helium concentration of 50 appm. (authors)

36 MATERIALS SCIENCE↗

Post service examination of a tritium permeator and a turbomolecular pump from the CAPER Facility at the Tritium Laboratory Karlsruhe

After 8 years of operation at the CAPER facility at the Tritium Laboratory Karlsruhe, a permeator used to separate hydrogen species from processed gases ceased operation due to multiple heater failures. This was subjected to post service examination to find the cause of the failures. This paper describe the methods used to locate the failures in the heaters and the likely cause. It was also necessary to determine the tritium inventory embedded in the structure for safe disposal. Destructive examination, adapted from a full combustion technique, was used on sections of the permeator. A fine black powder deposit, presumed to be mostly carbon, coated the surfaces of the inlet section of the feed side. This powder contained nearly half of the tritium within the permeator. The likely source of the powder and the consequences for the operation and eventual decommissioning of the ITER Tritium Plant are discussed. A failed turbomolecular pump from CAPER was also examined. There was evidence of wear on the emergency support bearing, but more importantly, when the pump internals were exposed to the glove box atmosphere (dry air) large quantities of tritium were rapidly released, this despite the isotopic swamping before removal from the CAPER glove box. Significant uptake of tritium in electrical insulation was also found. (authors)

42 ENGINEERING↗

Tritium confinement, retention, and releases at the tritium laboratory Karlsruhe

This paper describes the tritium confinement concept and the tritium retention systems at TLK. A description of the AMOR facility for the regeneration of the HTO loaded molecular sieve beds and the operational experience gained from the regeneration of molecular sieve beds (up to 20 times each) is also presented. Finally tritium releases over this period to the environment will also be given. (authors)

54 ENVIRONMENTAL SCIENCES↗