Engineering Papers⌕ Search

Engineering topics

Giordano, Nico

Publications and source records attributed to Giordano, Nico.

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High Pressure Synthesis of Pr 2 O 5 – A Unique Lanthanoid(IV) Oxide Peroxide

Abstract Reacting praseodymium(IV) oxide with oxygen at 27 GPa in a diamond anvil cell yielded the oxide peroxide Pr 2 IV (O 2 )O 3 , which was characterized by single crystal X‐ray diffraction on multi‐grain samples, Raman spectroscopy and quantum theoretical calculations at various pressure points. The presence of tetravalent praseodymium ions is supported by electronic structure calculations, showing a band gap of ca. 1.2 eV, which is consistent with the anticipated chemical model of an ionic solid. Pr 2 (O 2 )O 3 thus far represents the most oxygen rich phase of any binary compound of a lanthanoid and oxygen and is the first example of a peroxide anion next to Pr 4+ . Additionally, these results demonstrate that instead of oxidizing the praseodymium ions past their +IV oxidation state, oxygen undergoes a comproportionation to form peroxide anions. Direct oxidation of the oxide anions by Pr 4+ ‐ions was ruled out by a control experiment in argon instead of oxygen, where no oxidation of oxide ions was observed.

Chemistry↗
DOE OSTI2024

Hydrogenation of calcite and change in chemical bonding at high pressure: Diamond formation above 100GPa

Synchrotron X-ray diffraction (XRD) and Raman spectroscopy in laser heated diamond anvil cells and first principles molecular dynamics (FPMD) calculations have been used to investigate the reactivity of calcite and molecular hydrogen (H 2 ) at high pressures up to 120 GPa. We find that hydrogen reacts with calcite starting below 0.5 GPa at room temperature forming chemical bonds with carbon and oxygen. This results in the unit cell volume expansion; the hydrogenation level is much higher for powdered samples. Single-crystal XRD measurements at 8–24 GPa reveal the presence of previously reported III, IIIb, and VI calcite phases; some crystallites show up to 4% expansion, which is consistent with the incorporation of ≤ 1 hydrogen atom per formula unit. At 40–102 GPa XRD patterns of hydrogenated calcite demonstrate broadened features consistent with the calcite VI structure with incorporated hydrogen atoms. Above 80 GPa, the C–O stretching mode of calcite splits suggesting a change in the coordination of C–O bonds. Laser heating at 110 GPa results in the formation of C–C bonds manifested in the crystallization of diamond recorded by in situ XRD at 300 K and 110 GPa and by Raman spectroscopy on recovered samples commenced with C 13 calcite. We explored several theoretical models, which show that incorporation of atomic hydrogen results in local distortions of CO 3 groups, formation of corner-shared C–O polyhedra, and chemical bonding of H to C and O, which leads to the lattice expansion and vibrational features consistent with the experiments. In conclusion, the experimental and theoretical results support recent reports on tetrahedral C coordination in high-pressure carbonate glasses and suggest a possible source of the origin of ultradeep diamonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High‐Pressure Synthesis of Ultra‐Incompressible, Hard and Superconducting Tungsten Nitrides

Abstract Transition metal nitrides, particularly those of 5 d metals, are known for their outstanding properties, often relevant for industrial applications. Among these metal elements, tungsten is especially attractive given its low cost. In this high‐pressure investigation of the W–N system, two novel ultra‐incompressible tungsten nitride superconductors, namely W 2 N 3 and W 3 N 5 , are successfully synthesized at 35 and 56 GPa, respectively, through a direct reaction between N 2 and W in laser‐heated diamond anvil cells. Their crystal structure is determined using synchrotron single‐crystal X‐ray diffraction. While the W 2 N 3 solid's sole constituting nitrogen species are N 3‐ units, W 3 N 5 features both discrete N 3‐ as well as N 2 4‐ pernitride anions. The bulk modulus of W 2 N 3 and W 3 N 5 is experimentally determined to be 380(3) and 406(7) GPa, and their ultra‐incompressible behavior is rationalized by their constituting WN 7 polyhedra and their linkages. Importantly, both W 2 N 3 and W 3 N 5 are recoverable to ambient conditions and stable in air. Density functional theory calculations reveal W 2 N 3 and W 3 N 5 to have a Vickers hardness of 30 and 34 GPa, and superconducting transition temperatures at ambient pressure (50 GPa) of 11.6 K (9.8 K) and 9.4 K (7.2 K), respectively. Additionally, transport measurements performed at 50 GPa on W 2 N 3 corroborate with the calculations.

Chemistry↗
DOE OSTI2022

Stability of a Mixed–Valence Hydrous Iron–Rich Oxide: Implications for Water Storage and Dynamics in the Deep Lower Mantle

Incorporation of water into mantle compositions can have significant effects on the phase relations in the systems. Here, we synthesized an iron-rich hexagonal hydrous phase (referred to as "HH1-phase") under the high pressure-temperature (P-T) conditions of the deep lower mantle and determined the crystal structure of the HH1-phase at 79 GPa using the multigrain crystallography method. The chemical formula obtained was Fe 12.76 O 18 H x (x ~ to 4.5) in the Fe-O-H system. To demonstrate the role of HH1-phase for water storage in multicomponent systems relevant to mantle compositions, we investigated the stability of HH1-phase in both MgO-rich pyrolitic and SiO 2 -rich basaltic compositions. Our results indicate that the HH1-phase serves as major water storage in a pyrolitic composition, whereas the Al-rich CaCl 2 -type δ-phase and SiO 2 phase are major water storage phases in a SiO 2 -rich basaltic composition. Incorporation of considerable amounts of SiO 2 , MgO, and Al 2 O 3 into the HH1-phase expands its stability field from 98 GPa in the Fe-Al-O-H system to at least 108 GPa (corresponding to similar to 2,400 km depth) in the Mg-Si-Al-Fe-O-H system. Plumes of hot upwelling rock rooted at the base of the lower mantle have been proposed as a possible origin of hotspot volcanoes. The hydrous Fe-rich HH1-phase, if included into the material of upwelling plumes, will decompose on its rising to the upper part of the lower mantle and release water. Our results should provide constraints on water storage in the deep lower mantle and have implications for deep mantle dynamics.

58 GEOSCIENCES↗
DOE OSTI2021

Laser heating system at the Extreme Conditions Beamline, P02.2, $\mathrm{PETRA III}$

A laser heating system for samples confined in diamond anvil cells paired with in situ X-ray diffraction measurements at the Extreme Conditions Beamline of PETRA III is presented. The system features two independent laser configurations (on-axis and off-axis of the X-ray path) allowing for a broad range of experiments using different designs of diamond anvil cells. The power of the continuous laser source can be modulated for use in various pulsed laser heating or flash heating applications. An example of such an application is illustrated here on the melting curve of iron at megabar pressures. The optical path of the spectroradiometry measurements is simulated with ray-tracing methods in order to assess the level of present aberrations in the system and the results are compared with other systems, that are using simpler lens optics. Based on the ray-tracing the choice of the first achromatic lens and other aspects for accurate temperature measurements are evaluated.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

High-pressure polymorphism in pyridine

Single crystals of the high-pressure phases II and III of pyridine have been obtained by in situ crystallization at 1.09 and 1.69 GPa, revealing the crystal structure of phase III for the first time using X-ray diffraction. Phase II crystallizes in P 2 1 2 1 2 1 with Z ′ = 1 and phase III in P 4 1 2 1 2 with Z ′ = ½. Neutron powder diffraction experiments using pyridine-d 5 establish approximate equations of state of both phases. The space group and unit-cell dimensions of phase III are similar to the structures of other simple compounds with C 2v molecular symmetry, and the phase becomes stable at high pressure because it is topologically close-packed, resulting in a lower molar volume than the topologically body-centred cubic phase II. Phases II and III have been observed previously by Raman spectroscopy, but have been mis-identified or inconsistently named. Raman spectra collected on the same samples as used in the X-ray experiments establish the vibrational characteristics of both phases unambiguously. The pyridine molecules interact in both phases through CH...π and CH...N interactions. The nature of individual contacts is preserved through the phase transition between phases III and II, which occurs on decompression. A combination of rigid-body symmetry mode analysis and density functional theory calculations enables the soft vibrational lattice mode which governs the transformation to be identified.

36 MATERIALS SCIENCE↗