Engineering Papers⌕ Search

Engineering topics

Ginosar, Daniel M

Publications and source records attributed to Ginosar, Daniel M.

Sustainable Synthesis of Green Methanol Poster

This project examines the technical, economic and environmental feasibility of Flexible Chemical Manufacturing to produce green methanol. It is believed that the catalytic production of fuels and chemicals will not only be technically feasible but also economically feasible, and more importantly, environmentally sustainable.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Systems including catalysts in porous zeolite materials within a reactor for use in synthesizing hydrocarbons

Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

47 OTHER INSTRUMENTATION↗

Synthesis of Isobutene and Isobutane from Synthesis Gas. A Literature Review Since 1992

The isosynthesis reaction is commonly referred as the reaction that converts selectively synthesis gas to isobutene and isobutane. The main feature of this reaction is the production of branched hydrocarbons in higher proportion with respect to linear hydrocarbons than expected from thermodynamic equilibrium and with a molecular weight distribution favoring iso-C4 hydrocarbons. This article reviews and summarizes isosynthesis research results reported in the open scientific literature with emphasis on the articles published in the last two decades.

10 SYNTHETIC FUELS↗

Direct production of hydrogen and aromatics from methane or natural gas: Review of recent U.S. patents

Since the year 2000, the United States Patent and Trademark Office (USPTO) has granted a dozen patents for inventions related to methane dehydroaromatization processes. One of them was granted to UOP LLC (Des Plaines). It relates to a catalyst composition and preparation method. Two patents were granted to Conoco Phillips Company (Houston, TX). One was aimed at securing a process and operating conditions for methane aromatization. The other was aimed at securing a process that may be integrated with separation of wellhead fluids and blending of the aromatics produced from the gas with the crude. Nine patents were granted to ExxonMobil Chemical Patents Inc. (Houston, TX). Most of these were aimed at securing a dehydroaromatization process where methane-containing feedstock moves counter currently to a particulate catalyst. The coked catalyst is heated or regenerated either in the reactor, by cyclic operation, or in annex equipment, and returned to the reactor. The reactor effluent stream may be separated in its main components and used or recycled as needed. A brief summary of those inventions is presented in this review.

03 NATURAL GAS↗

Thermal Stability of Cyclopentane as an Organic Rankine Cycle Working Fluid

Laboratory experiments were performed to aid in determining the maximum operating temperature for cyclopentane as an Organic Rankine Cycle working fluid. The thermochemical decomposition of cyclopentane was measured in a recirculation loop at 240 C, 300 C and 350 C at 43 bar in a glass-lined heated tube. It was determined that in the absence of air at the lower two temperatures, decomposition was minor after more than twelve days of continuous operation. At 240 C, the total cyclopentane decomposition products were approximately 65 parts per million (ppm) and at 300 C, total decomposition products were on the order of 270 ppm at the end of the experiment. At 350 C, decomposition products were significantly higher and reached 1,500 ppm. When the feed was contacted with air, the decomposition rate increased dramatically. Residues found in the reactor after the decomposition experiments were examined by a number of different techniques. The mass of the residues increased with experimental temperature, but was lower at the same temperature when the feed was contacted with air. Analysis of the residues suggested that the residues were primarily heavy saturated hydrocarbons.

42 ENGINEERING↗

Commercial Activated Carbon for the Catalytic Production of Hydrogen via the Sulfur-Iodine Thermochemical Water Splitting Cycle

Eight activated carbon catalysts were examined for their catalytic activity to decompose hydroiodic acid (HI) to produce hydrogen; a key reaction in the sulfur-iodine (S-I) thermochemical water splitting cycle. Activity was examined under a temperature ramp from 473 to 773 K. No statistically significant correlation was found between catalyst sample properties and catalytic activity. Four of the eight samples were examined for one week of continuous operation at 723 K. All samples appeared to be stable over the period of examination.

08 HYDROGEN↗

Methods of using structures including catalytic materials disposed within porous zeolite materials to synthesize hydrocarbons

Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement of alkylation catalysts for improved supercritical fluid regeneration

A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

Ginosar, Daniel M↗

System for reactivating catalysts

A method of reactivating a catalyst, such as a solid catalyst or a liquid catalyst is provided. The method comprises providing a catalyst that is at least partially deactivated by fouling agents. The catalyst is contacted with a fluid reactivating agent that is at or above a critical point of the fluid reactivating agent and is of sufficient density to dissolve impurities. The fluid reactivating agent reacts with at least one fouling agent, releasing the at least one fouling agent from the catalyst. The at least one fouling agent becomes dissolved in the fluid reactivating agent and is subsequently separated or removed from the fluid reactivating agent so that the fluid reactivating agent may be reused. A system for reactivating a catalyst is also disclosed.

Ginosar, Daniel M↗