Engineering Papers⌕ Search

Engineering topics

Ginley, David S.

Publications and source records attributed to Ginley, David S..

At least 19 records

Impact of Sr-Containing Secondary Phases on Oxide Conductivity in Solid-Oxide Electrolyzer Cells

Solid-oxide electrolyzer cells (SOECs) based on a yttria-stabilized zirconia (YSZ) oxide electrolyte produce hydrogen from water with the assistance of excess thermal energy; however, Sr diffusion within the Gd-doped CeO 2 (GDC) barrier layer during processing or operation can lead to the formation of unwanted secondary phases such as SrO and SrZrO 3 . Here, to establish and compare the degree of impact of these phases on SOEC performance, we conduct first-principles calculations to study their bulk oxide conductivities and compare them to that of the YSZ electrolyte. We find that SrO has a low conductivity arising from the poor mobility and low concentration of mobile oxygen vacancies, and its presence in SOECs should therefore be avoided. SrZrO 3 also has a lower oxide conductivity than YSZ; however, this discrepancy is primarily due to lower vacancy concentrations rather than low mobility. We find that sufficient levels of Y-doping on the Zr site can increase oxygen vacancy concentrations in SrZrO 3 to achieve an oxide ionic conductivity on par with that of YSZ, thereby mitigating any potential deleterious effect on transport performance. Energy-dispersive X-ray spectroscopy confirms that Y is the most common minority element present in SrZrO 3 forming near the GDC–YSZ interface, alleviating concerns regarding the impact of SrZrO 3 on device performance. These results from our combined computational–experimental analysis can inform future engineering strategies designed to limit the detrimental effects of Sr-induced secondary phase formation on SOEC performance.

08 HYDROGEN↗

Formation of Ba 3 Nb 0.75 Mn 2.25 O 9 -6H during thermochemical reduction of Ba 4 NbMn 3 O 12 -12R

The resurgence of interest in hydrogen-related technologies has stimulated new studies aimed at advancing lesser-developed water-splitting processes, such as solar thermochemical hydrogen production (STCH). Progress in STCH has been largely hindered by a lack of new materials able to efficiently split water at a rate comparable to ceria under identical experimental conditions. BaCe 0.25 Mn 0.75 O 3 (BCM) recently demonstrated enhanced hydrogen production over ceria and has the potential to further our understanding of two-step thermochemical cycles. A significant feature of the 12R hexagonal perovskite structure of BCM is the tendency to, in part, form a 6H polytype at high temperatures and reducing environments ( i.e. , during the first step of the thermochemical cycle), which may serve to mitigate degradation of the complex oxide. An analogous compound, namely BaNb 0.25 Mn 0.75 O 3 (BNM) with a 12R structure was synthesized and displays nearly complete conversion to the 6H structure under identical reaction conditions as BCM. The structure of the BNM-6H polytype was determined from Rietveld refinement of synchrotron powder X-ray diffraction data and is presented within the context of the previously established BCM-6H structure.

08 HYDROGEN↗

Investigating the Electronic Structure of Prospective Water-Splitting Oxide BaCe 0.25 Mn 0.75 O 3-δ before and after Thermal Reduction

BaCe 0.25 Mn 0.75 O 3-δ (BCM), a non-stoichiometric oxide with a layered perovskite-like crystal structure, has recently emerged as a prospective contender for application in renewable energy harvesting by solar thermochemical hydrogen generation. Using solar-thermal energy and a reducing environment, oxygen vacancies can be created in high-temperature BCM, and the reduced crystal so obtained can, in turn, produce H 2 by stripping oxygen from H 2 O. Therefore, a first step toward understanding the working mechanism and optimizing the performance of BCM is a thorough and comparative analysis of the electronic structure of the pristine and the reduced material. In this paper, we probe the electronic structure of BCM using the combined effort of first-principles calculations and experimental O K-edge X-ray absorption spectroscopy (XAS). The computed projected density of states (PDOS) and orbital plots are used to propose a simplified model for orbital mixing between the oxygen and metal atoms. With the help of state-of-the-art simulations, we are able to find the origins of the XAS peaks and categorize them on the basis of contribution from Ce and Mn. For the reduced crystal, the calculations show that the change in electron density resulting from the reduction is strongly localized around the oxygen vacancy. Experimental measurements reveal a marked lowering of the first O K-edge peak in the reduced crystal. Using theoretical analysis, this is shown to result from lifting of spin degeneracy in the absorption peaks as well as from a diminished O 2p contribution to the frontier unoccupied orbitals, in accordance with the tight binding scheme. The simulated results serve as a reference for the extent of spectral change as a function of the percentage of oxygen vacancies in the reduced crystal. Here, our study paves the way for the investigation of the working mechanism of BCM and for computational and experimental efforts aimed at design and discovery of efficient water-splitting oxides.

08 HYDROGEN↗

Synchrotron-based techniques for characterizing STCH water-splitting materials

Understanding the role of oxygen vacancy–induced atomic and electronic structural changes to complex metal oxides during water-splitting processes is paramount to advancing the field of solar thermochemical hydrogen production (STCH). The formulation and confirmation of a mechanism for these types of chemical reactions necessitate a multifaceted experimental approach, featuring advanced structural characterization methods. Synchrotron X-ray techniques are essential to the rapidly advancing field of STCH in part due to properties such as high brilliance, high coherence, and variable energy that provide sensitivity, resolution, and rapid data acquisition times required for the characterization of complex metal oxides during water-splitting cycles. X-ray diffraction (XRD) is commonly used for determining the structures and phase purity of new materials synthesized by solid-state techniques and monitoring the structural integrity of oxides during water-splitting processes (e.g., oxygen vacancy–induced lattice expansion). X-ray absorption spectroscopy (XAS) is an element-specific technique and is sensitive to local atomic and electronic changes encountered around metal coordination centers during redox. While in operando measurements are desirable, the experimental conditions required for such measurements (high temperatures, controlled oxygen partial pressures, and H 2 O) practically necessitate in situ measurements that do not meet all operating conditions or ex situ measurements. Here, we highlight the application of synchrotron X-ray scattering and spectroscopic techniques using both in situ and ex situ measurements, emphasizing the advantages and limitations of each method as they relate to water-splitting processes. The best practices are discussed for preparing quenched states of reduction and performing synchrotron measurements, which focus on XRD and XAS at soft (e.g., oxygen K-edge, transition metal L-edges, and lanthanide M-edges) and hard (e.g., transition metal K-edges and lanthanide L-edges) X-ray energies. The X-ray absorption spectra of these complex oxides are a convolution of multiple contributions with accurate interpretation being contingent on computational methods. The state-of-the-art methods are discussed that enable peak positions and intensities to be related to material electronic and structural properties. Through careful experimental design, these studies can elucidate complex structure–property relationships as they pertain to nonstoichiometric water splitting. A survey of modern approaches for the evaluation of water-splitting materials at synchrotron sources under various experimental conditions is provided, and available software for data analysis is discussed.

08 HYDROGEN↗

Synthesis and structure of high-purity BaCe 0.25 Mn 0.75 O 3 : an improved material for thermochemical water splitting

Solar thermochemical hydrogen production (STCH) via redox-active metal oxides is an approach for direct solar-driven hydrogen generation typically using a high-temperature redox cycle involving refractory oxides and steam. Typical cycles involve high-temperature reduction of oxides to form oxygen vacancies, followed by lower temperature reaction between oxygen vacancies and steam where the oxide is re-oxidized and the steam is reduced to hydrogen. Only a few materials have demonstrated reversible cycling under the typically harsh STCH conditions (e.g. 1500°C reduction, 900°C re-oxidation) and critical questions remain on the true reversibility of non-stoichiometric multi-cation oxide systems, significantly hampered by the lack of single-phase samples for these material systems. To date, most STCH processes have relied on CeO 2 as a benchmark active material, but more recently, the 12R phase of BaCe 0.25 Mn 0.75 O 3 (BCM) has demonstrated greater hydrogen-generation potential at lower peak temperatures. However, previous reports of 12R-BCM have included large fractions, > 10 wt%, of secondary phases, which complicate analysis of the stability and performance. A comprehensive understanding of the redox mechanism and reversibility of the process in BCM can only be achieved with nearly single-phase samples which, to date, have been difficult to produce. Here two approaches to BCM synthesis are reported: solid state and sol–gel-based routes. It is demonstrated that both routes can be tuned to produce the 12R structure with > 97 wt% yield when annealed ≥1450°C. Herein synchrotron-based diffraction measurements of rhombohedral 12R-BCM enabled characterization of the anisotropy between thermal expansion along the c-axis and within the ab plane. The impact of high-temperature redox cycling on the stability and phase fraction of the 12R-BCM polytype was also investigated. Our results offer two viable routes for synthesis of high-purity 12R-BCM critically needed for evaluating the efficacy of BCM as a STCH material and validate its ability to split water at lower temperatures over extended numbers of redox cycles.

08 HYDROGEN↗

Formation of 6H-Ba 3 Ce 0.75 Mn 2.25 O 9 during Thermochemical Reduction of 12R-Ba 4 CeMn 3 O 12 : Identification of a Polytype in the Ba(Ce,Mn)O 3 Family

The resurgence of interest in a hydrogen economy and the development of hydrogen-related technologies has initiated numerous research and development efforts aimed at making the generation, storage, and transportation of hydrogen more efficient and affordable. Solar thermochemical hydrogen production (STCH) is a process that potentially exhibits numerous benefits such as high reaction efficiencies, tunable thermodynamics, and continued performance over extended cycling. Although CeO 2 has been the de facto standard STCH material for many years, more recently 12R-Ba 4 CeMn 3 O 12 (BCM) has demonstrated enhanced hydrogen production at intermediate H 2 /H 2 O conditions compared to CeO 2 , making it a contender for large-scale hydrogen production. However, the thermo-reduction stability of 12R-BCM dictates the oxygen partial pressure (pO 2 ) and temperature conditions optimal for cycling. In this study, we identify the formation of a 6H-BCM polytype at high temperature and reducing conditions, experimentally and computationally, as a mechanism and pathway for 12R-BCM decomposition. 12R-BCM was synthesized with high purity and then controllably reduced using thermogravimetric analysis (TGA). Synchrotron X-ray diffraction (XRD) data is used to identify the formation of a 6H-Ba 3 Ce 0.75 Mn 2.25 O 9 (6H-BCM) polytype that is formed at 1350 degrees C under strongly reducing pO 2 . Density functional theory (DFT) total energy and defect calculations show a window of thermodynamic stability for the 6H-polytype consistent with the XRD results. These data provide the first evidence of the 6H-BCM polytype and could provide a mechanistic explanation for the superior water-splitting behaviors of 12R-BCM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Utilizing TiO 2 amorphous precursors for polymorph selection: An in situ TEM study of phase formation and kinetics

Selective synthesis of metastable polymorphs requires a fundamental understanding of the complex energy landscapes in which these phases form. Recently, the development of in situ high temperature and controlled atmosphere transmission electron microscopy has enabled the direct observation of nucleation, growth, and phase transformations with near atomic resolution. In this work, we directly observe the crystallization behavior of amorphous TiO 2 thin films grown under different pulsed laser deposition conditions and quantify the mechanisms behind metastable crystalline polymorph stabilization. Films deposited at 10 mTorr chamber oxygen pressure crystallize into nanocrystalline Anatase at 325 degrees C, whereas films deposited at 2 mTorr crystallize into significantly larger needle-like grains of Brookite and Anatase at 270 degrees C. Increasing film deposition rate by a factor of 4 results in a 10x increase in the crystalline growth front velocity as well as a decrease in crystallization temperature from 270 degrees C to 225 degrees C. Engineering the amorphous precursor state through deposition conditions therefore provides routes to microstructure control and the accessibility of higher energy metastable phases.

36 MATERIALS SCIENCE↗

The existence and impact of persistent ferroelectric domains in MAPbI 3

Methylammonium lead iodide (MAPbI 3 ) exhibits exceptional photovoltaic performance, but there remains substantial controversy over the existence and impact of ferroelectricity on the photovoltaic response. We confirm ferroelectricity in MAPbI 3 single crystals and demonstrate mediation of the electronic response by ferroelectric domain engineering. The ferroelectric response sharply declines above 57°C, consistent with the tetragonal-to-cubic phase transition. Concurrent band excitation piezoresponse force microscopy–contact Kelvin probe force microscopy shows that the measured response is not dominated by spurious electrostatic interactions. Large signal poling (>16 V/cm) orients the permanent polarization into large domains, which show stabilization over weeks. X-ray photoemission spectroscopy results indicate a shift of 400 meV in the binding energy of the iodine core level peaks upon poling, which is reflected in the carrier concentration results from scanning microwave impedance microscopy. As a result, the ability to control the ferroelectric response provides routes to increase device stability and photovoltaic performance through domain engineering.

14 SOLAR ENERGY↗

Selective Brookite Polymorph Formation Related to the Amorphous Precursor State in TiO 2 Thin Films

A wide variety of brookite TiO 2 synthesis methods have been published over the past several decades, but few studies discuss the underlying mechanism that stabilizes brookite over its stable counterparts, rutile and anatase. Here in this study, we investigate of the effect of pulsed laser deposition parameters on the as-deposited amorphous precursor titania thin films, which subsequently crystallize into stable and metastable TiO 2 polymorphs upon annealing. We find that oxygen pressure in the deposition chamber strongly influences the non-equilibrium state of the amorphous precursor, which ultimately allows for selective polymorph formation. Rutile forms as the dominant phase at low pO 2 < 0.1 mTorr, while anatase is favored at high pO 2 > 5 mTorr. Brookite forms primarily at intermediate pO 2 (0.5-1.0 mTorr). Controlling the amorphous structure (i.e. Ti - O bonding and polyhedral arrangement) of the precursors via oxygen deficiency is therefore likely for the selective formation of crystalline TiO 2 polymorphs from sub-stoichiometric amorphous precursors. Lastly, directing phase selectivity by manipulating the structure and internal energy of the precursor amorphous state may have tremendous potential for synthesis of metastable crystalline phases that exhibit more desirable properties in comparison to their stable counterparts.

36 MATERIALS SCIENCE↗

Experimental demonstration of a dispatchable latent heat storage system with aluminum-silicon as a phase change material

In this work, we present the design, construction, and experimental results of a prototype latent heat thermal energy storage system. The prototype consists of a thermal storage tank with 100 kg of the aluminum-silicon eutectic as a phase change material, a valved thermosyphon that controls heat flow from the thermal storage tank to the power block, and thermoelectric generators for conversion of heat to electricity. We tested the prototype over four simulated days, where each day consisted of four phases of operation: charging, discharging, simultaneous charging and discharging, and storage. Our results show three major conclusions. First, the thermal energy storage system was able to receive and distribute heat with small temperature gradients - less than 5 degrees C throughout the thermal storage tank. Second, the valved thermosyphon was able to effectively control heat transfer, demonstrating an on/off thermal conductance ratio of 430. Third, the interfaces between subsystems had small temperature drops: of the ~ 560 degrees C temperature drop from the thermal storage tank to the heat rejection system, ~ 525 degrees C occurred across the power block. This work overcomes the challenges of integrating previously-developed subsystems together, providing a proof-of-concept of this system.

14 SOLAR ENERGY↗

Understanding crystallization pathways leading to manganese oxide polymorph formation

Abstract Hydrothermal synthesis is challenging in metal oxide systems with diverse polymorphism, as reaction products are often sensitive to subtle variations in synthesis parameters. This sensitivity is rooted in the non-equilibrium nature of low-temperature crystallization, where competition between different metastable phases can lead to complex multistage crystallization pathways. Here, we propose an ab initio framework to predict how particle size and solution composition influence polymorph stability during nucleation and growth. We validate this framework using in situ X-ray scattering, by monitoring how the hydrothermal synthesis of MnO 2 proceeds through different crystallization pathways under varying solution potassium ion concentrations ([K + ] = 0, 0.2, and 0.33 M). We find that our computed size-dependent phase diagrams qualitatively capture which metastable polymorphs appear, the order of their appearance, and their relative lifetimes. Our combined computational and experimental approach offers a rational and systematic paradigm for the aqueous synthesis of target metal oxides.

36 MATERIALS SCIENCE↗

Theory-Guided Synthesis of a Metastable Lead-Free Piezoelectric Polymorph

Many technologically critical materials are metastable under ambient conditions, yet the understanding of how to rationally design and guide the synthesis of these materials is limited. This paper presents an integrated approach that targets a metastable lead-free piezoelectric polymorph of SrHfO 3 . First-principles calculations predict that the previous experimentally unrealized, metastable P4mm phase of SrHfO 3 should exhibit a direct piezoelectric response (d 33 ) of 36.9 pC N -1 (compared to d 33 = 0 for the ground state). Combining computationally optimized substrate selection and synthesis conditions lead to the epitaxial stabilization of the polar P4mm phase of SrHfO 3 on SrTiO 3 . The films are structurally consistent with the theory predictions. A ferroelectric-induced large signal effective converse piezoelectric response of 5.2 pm V -1 for a 35 nm film is observed, indicating the ability to predict and target multifunctionality. Finally, this illustrates a coupled theory-experimental approach to the discovery and realization of new multifunctional polymorphs.

36 MATERIALS SCIENCE↗

Correlative Raman spectroscopy and focused ion beam for targeted phase boundary analysis of titania polymorphs

Site-specific preparation of specimens using focused ion beam instruments for transmission electron microscopy is at the forefront of targeting regions of interest for nanoscale characterization. Typical methods of pinpointing desired features include electron backscatter diffraction for differentiating crystal structures and energy-dispersive X-Ray spectroscopy for probing compositional variations. Yet there are situations, notably in the titanium dioxide system, where these techniques can fail. Differentiating between the brookite and anatase polymorphs of titania is either excessively laborious or impossible with the aforementioned techniques. However, due to differences in bonding structure, Raman spectroscopy serves as an ideal candidate for polymorph differentiation. In this work, a correlative approach utilizing Raman spectroscopy for targeted focused ion beam specimen preparation was employed. Dark field imaging and diffraction in the transmission electron microscope confirmed the region of interest located via Raman spectroscopy and demonstrated the validity of this new method. Correlative Raman spectroscopy, scanning electron microscopy, and focused ion beam is shown to be a promising new technique for identifying site-specific preparation of nanoscale specimens in cases where conventional approaches do not suffice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-fraction brookite films from amorphous precursors

Structure-specific synthesis processes are of key importance to the growth of polymorphic functional compounds such as TiO 2 , where material properties strongly depend on structure as well as chemistry. The robust growth of the brookite polymorph of TiO 2 , a promising photocatalyst, has been difficult in both powder and thin-film forms due to the disparity of reported synthesis techniques, their highly specific nature, and lack of mechanistic understanding. In this work, we report the growth of high-fraction (~95%) brookite thin films prepared by annealing amorphous titania precursor films deposited by pulsed laser deposition. We characterize the crystallization process, eliminating the previously suggested roles of substrate templating and Na helper ions in driving brookite formation. Instead, we link phase selection directly to film thickness, offering a novel, generalizable route to brookite growth that does not rely on the presence of extraneous elements or particular lattice-matched substrates. In addition to providing a new synthesis route to brookite thin films, our results take a step towards resolving the problem of phase selection in TiO 2 growth, contributing to the further development of this promising functional material.

14 SOLAR ENERGY↗