Engineering topics
Publications and source records attributed to Geoffrey Landis.
Long lunar nights limit science lander lifetimes to only two weeks in most global locations unless they carry large batteries or radioisotopes. An orbiting beamed power spacecraft is another option to provide this energy, thus removing the energy storage burden on the lander while still giving it years of science operations.
Titan is unique in the outer solar system in that it is the only moon with a thick atmosphere, and the only body in the solar system outside the Earth with liquid seas on its surface. The Titanian oceans, however, are seas of liquid hydrocarbons, and the rocks on the surface are solid water ice. Like other icy Moons of the outer solar system, beneath the ice crust, Titan also has a subsurface ocean. Rodriguez et al. refer to it as the “world with two oceans”, an organic-rich body with interior-surface-atmosphere interactions that are comparable in complexity to the Earth. [1] Titan is scientifically fascinating in many ways [2], [3], [4]. The Compass Team will emphasize just one here: Titan is a high priority target for astrobiology [4] [5] [6] [7] [8] [9] [10] [11]. It is a world with a surface and atmosphere rich in the complex organic compounds known as tholins. A detailed understanding of the nature of these complex compounds will require an analysis using a full laboratory on Earth. Because of its value to understanding the organic compounds of the outer solar system which may be the primordial building-blocks of life, return of samples from Titan to laboratories on Earth will be the primary goal of this mission. While this would give unprecedented science return, returning even a small sample from Titan using conventional technology would be tremendously difficult. Saturn is almost a billion miles from the Earth, about thirteen times farther than Mars. A return mission to Saturn requires such a large total-mission ∆V that, with conventional technology, the mass ratios required are prohibitive. Such a sample return would truly be “mission incredible.” But to date, a sample return mission from so distant a target has been assumed to be, not merely incredible, but mission impossible. The Compass Team has proposed [2] [12] that by manufacturing the propellant for the return to Earth using the resources available on Titan, such a mission becomes possible. The task of this report is to show that it is reasonable with credible space technology.
Compass Team was tasked by the RPS Project at the NASA Glenn Research Center (GRC) to create an independent concept design for a spacecraft (S/C) utilizing low power radioisotope power. A list of candidate missions enabled by milliwatt class radioisotope power was evaluated and thus resulted in the selection of a Mars polar region seismology network of four hard landers. A science rational and science operations plan was developed to establish mission design requirements and S/C subsystem concept designs described herein.
The Fourteenth Space Photovoltaic Research and Technology conference was held at the NASA Lewis Research Center from October 24-26, 1995. The abstracts presented in this volume report substantial progress in a variety of areas in space photovoltaics. Technical and review papers were presented in many areas, including high efficiency GaAs and InP solar cells, GaAs/Ge cells as commercial items, high efficiency multiple bandgap cells, solar cell and array technology, heteroepitaxial cells, thermophotovoltaic energy conversion, and space radiation effects. Space flight data on a variety of cells were also presented.
We propose a “magneto-inductive” technology, employing a sensitive receiver based on a Superconducting Quantum Interference Device (SQUID), to enable communications through conductive media, so as to pave the way for exploration of ocean worlds, especially a Europa scenario. Concepts for ice penetration systems to access the presumed liquid ocean on Europa are under development but it was previously considered impractical if not impossible to communicate through the briny ice with conventional propagating electromagnetic signals.
A vision for exploration of the solar system in an earth independent manner is presented taking into account key drivers, challenges and future technological advances. This work was in response to requirements set by the NASA Advanced Exploration Systems (AES) Office. Planetary targets, key assumptions and approaches to utilizing non-terrestrial resources are presented. The mission was divided into four sprints. The first sprint aims at a settlement on Earth’s moon. The second sprint aims at establishing a Lagrangian point station near the moon. The third sprint leads to the colonization of Mars and its moons. The fourth and final sprint investigated the exploration of Callisto, a moon of Jupiter. Bio-inspired approaches to technology and processes were considered to ensure that the in-space habitats are Earth like. The conclusion based on exploring the four sprints is that it is feasible to colonize the solar system without relying on earth but this relies on critical technology development and investments in emerging areas.
A vision for exploration of the solar system in an earth independent manner is presented taking into account key drivers, challenges and future technological advances. This work was in response to requirements set by the NASA Advanced Exploration Systems (AES) Office. Planetary targets, key assumptions and approaches to utilizing non-terrestrial resources are presented. The mission was divided into four sprints. The first sprint aims at a settlement on Earth’s moon. The second sprint aims at establishing a Lagrangian point station near the moon. The third sprint leads to the colonization of Mars and its moons. The fourth and final sprint investigated the exploration of Callisto, a moon of Jupiter.. Bio-inspired approaches to technology and processes were considered to ensure that the in-space habitats are Earth like. The conclusion based on exploring the four sprints is that it is feasible to colonize the solar system without relying on earth but this relies on critical technology development and investments in emerging areas.
Status of NIAC Phase I study for NIAC Symposium (remote). An overview of the Insitu Titan Sample Return concept. The Compass team developed a concept to return 3 kg of cryogenic samples from the surface of Saturn's moon Titan by gathering ~3000 kg of ice and methane to fuel an inflatable, 3 stage launch vehicle to propel a return vehicle and aeroshell back to earth. Note: This presentation does not include voice information and is not available for this record.
A concept of operations is presented for power beaming of microwaves to extend battery charge of an electric air vehicle. Critical aspects of airspace operations and power beam charging are addressed. Three classes of electric Vertical Take-Off and Landing vehicle models are considered for recharging. The effects of transmitter frequency, antenna size, and beam width are analyzed. Based on past experiments in the industry, a 2.5 kW power beam is selected. A no-drag rectifying antenna under the belly of the vehicle is selected along with the conversion efficiency, power density, and its size. The combined efficiency of the transmit/receive system as well as the beam containment values are addressed. These parameters are chosen to assess viability and feasibility of the energy augmentation method to establish safety for humans on-board from exposure to the transmitted energy. NASA will test the concept of operations in a laboratory experiment with parameters selected and presented in this paper.
A concept of operations is presented for power beaming of microwaves to extend battery charge of an electric air vehicle. Critical aspects of airspace operations and power beam charging are addressed. Three classes of electric Vertical Take-Off and Landing vehicle models are considered for recharging. The effects of transmitter frequency, antenna size, and beam width are analyzed. Based on past experiments in the industry, a 2.5 kW power beam is selected. A no-drag rectifying antenna under the belly of the vehicle is selected along with the conversion efficiency, power density, and its size. The combined efficiency of the transmit/receive system as well as the beam containment values are addressed. These parameters are chosen to assess viability and feasibility of the energy augmentation method to establish safety for humans on-board from exposure to the transmitted energy. NASA will test the concept of operations in a laboratory experiment with parameters selected and presented here.
As NASA prepares to explore Mars, we describe an innovative architecture that could be based on public-private partnerships to offset the costs of such a mission, while demonstrating many of the key technologies—propulsion, communications, autonomy, and landing systems—that will be needed for future human exploration. We propose that NASA could use this capability to deliver dozens of small rovers to several sites on Mars to enable the creation of interactive games that would be operated commercially and sponsored privately. NASA would get a reduced cost to demonstrate a portion of the infrastructure needed for human exploration, and the private sector would get access to a new market and sponsorship opportunities for a broadly popular activity. In addition, our proposed architecture could enable a new, intuitive means for scientists to interpret data and conduct ground operations. This proposal is to broadly develop the overall concept, while focusing on the design of the novel communications system, developing requirements for the software architecture needed to control the rovers and implement gaming, and developing gaming concepts.
Due to long shadow periods (2 weeks or greater) on the south pole, concepts to raise solar arrays to a sufficient height at specific locations have shown the capability to provide power to surface users for much longer periods. Such a tower can also provide a 3rd Generation Partnership Project (3GPP) service for users up to 10 km away, dependent on terrain. An option to deliver power, albeit with low efficiency, using a laser beam coupled with the tower height could provide mobile and fixed users power during darkness, reducing their battery requirements. A demonstration of these technologies in the lunar environment is crucial to support future Artemis campaigns as well as potential emerging lunar infrastructures. A demonstrator design of a 15 m deployed boomon the south pole has been shown to enable both the gathering of kilowatts of power and the provision of 3GPP relay and backhaul given an appropriate lunar location. Using a laser to send power to a photovoltaic receiver has been proposed to transmit electrical power on the moon, particularly for applications such as powering a rover in near-polar permanently shadowed regions (PSR) where solar power is not available. In this work, the Compass team performed a conceptual engineering design study of a near-term laser surface-to-surface power beaming and relay station using a tower to simultaneously carry the power source (Vertical Solar Array Technologies (VSAT)[1]), the 3GPP relay antenna, and the laser telescope.
Explore the source record for details and available documents.
A ‘quick’ Enceladus sample return mission concept was developed based on the scientist recommendations at the recent ‘Accelerating Space Science with Nuclear Technology Workshop’. The Nuclear Electric Propulsion spacecraft assumed a follow-on 40 kWe nuclear reactor using the demonstrated 40 kWe Fission Surface Power system, expected in the early 2030s. The NEP vehicle also utilized a set of NEXT-C ion thrusters as well as planned Artemis commercial launchers. By launching the 40 kW NEP vehicle on a Starship and adding the propellants of 15 tankers, the 27t probe could be sent on a direct trajectory to Saturn (no Earth or Jupiter flybys) where NEP was used for Saturn capture, spiral down, spiral up and return to the Earth. A small lander obtained the surface Enceladus sample. Using the 40 kW NEP provided a round-trip time of only 16.5 years. A second option was more attractive from a science perspective whereby the NEP vehicle would deliver a large, 6t chemical lander to low Enceladus orbit where it would grab and return a sample to Earth (similar to the recent Orbilander design but in reverse). After deploying the lander, the NEP vehicle would stay in Saturn space performing a moon tour by orbiting four more moons and mapping the large moon of Titan. This option took slightly longer (18.5 yrs) due to the chemical return leg limitations. Both options demonstrated the agility, payload capability, and sample return goals the workshop recommended. An all-chemical option with two stages was roughly analyzed but took 21.5 yrs and required a Jupiter gravity assist.