Engineering Papers⌕ Search

Engineering topics

Genzer, J

Publications and source records attributed to Genzer, J.

Asphaltene Adsorption onto Self-Assembled Monolayers of Alkyltrichlorosilanes of Varying Chain Length

The adsorption of asphaltenes onto flat silica surfaces modified with self-assembled monolayers (SAMs) of alkyltrichlorosilanes of varying thickness due to a variable number of carbon atoms (N{sub C}) has been studied by means of contact angle measurements, spectroscopic ellipsometry, and near-edge X-ray absorption fine structure spectroscopy. The extent of asphaltene adsorption was found to depend primarily on the ability of the SAM layer to shield the underlying silicon substrate from interacting with the asphaltenes present in solution. Specifically, asphaltene adsorption decreased with an increase in NC and/or an increase in SAM grafting density, {sigma}{sub SAM}, (i.e., number of SAM molecules per unit area). The effect of the solvent quality on the extent of asphaltene adsorption was gauged by adsorbing asphaltenes from toluene, 1-methylnaphthalene, tetralin, decalin, and toluene-heptanes mixtures. The extent of asphaltene adsorption was found to increase proportionally with a decrease in the Hildebrand solubility parameter of the solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of the Electron Escape Depth for NEXAFS Spectropy

A novel method was developed to determine carbon atom density as a function of depth by analyzing the postedge signal in near-edge X-ray absorption fine structure (NEXAFS) spectra. We show that the common assumption in the analysis of NEXAFS data from polymer films, namely, that the carbon atom density is constant as a function of depth, is not valid. This analysis method is then used to calculate the electron escape depth (EED) for NEXAFS in a model bilayer system that contains a perfluorinated polyether (PFPE) on top of a highly oriented pyrolitic graphite (HOPG) sample. Because the carbon atom densitites of both layers are known, in addition to the PFPE surface layer thickness, the EED is determined to be 1.95 nm. This EED is then used to measure the thickness of the perfluorinated surface layer of poly(4-(1H,1H,2H,2H-perfluorodecyl)oxymethylstyrene) (PFPS).

36 MATERIALS SCIENCE↗

Asphaltene Adsorption onto Self-Assembled Monolayers of Mixed Aromatic

The adsorption of asphaltenes onto flat solid surfaces modified with mixed self-assembled monolayers (SAMs) of aliphatic and aromatic trichlorosilanes with varying wettabilities, aromaticities, and thicknesses is tested. The mixed SAMs are characterized by means of contact angle to assess hydrophobicity and molecular and chemical uniformity, spectroscopic ellipsometry to measure the thickness of the films, and near edge X-ray absorption fine structure (NEXAFS) spectroscopy to assess chemical and molecular composition. The molecular characteristics of the adsorbed asphaltene layer and the extent of asphaltene adsorption are determined using NEXAFS and spectroscopic ellipsometry, respectively. The SAMs are formed by depositing phenyl-, phenethyl-, butyl-, and octadecyl- trichlorosilanes from toluene solutions onto silica-coated substrates; the chemical composition and the wettability of the SAM surface is tuned systematically by varying the trichlorosilane composition in the deposition solutions. The adsorption of asphaltenes on the substrates does not correlate strongly with the SAM chemical composition. Instead, the extent of asphaltene adsorption decreases with increasing SAM thickness. This observation suggests that the leading interaction governing the adsorption of asphaltenes is their interaction with the polar silica substrate and that the chemical composition of the SAM is of secondary importance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alternative Fluoropolymers to Avoid the Challenges Associated with Perfluorooctanoic Acid

The degradation of stain-resistant coating materials leads to the release of biopersistent perfluorooctanoic acid (PFOA) to the environment. In order to find the environmentally friendly substitutes, we have designed and synthesized a series of nonbiopersistant fluorinated polymers containing perfluorobutyl groups in the side chains. The surface properties of the new coating materials were characterized by static and dynamic contact angle measurements. The new coating materials demonstrate promising hydrophobic and oleophobic properties with low surfaces tensions. The wetting properties and surface structure of the polymers were tuned by varying the 'spacer' structures between the polymer backbones and the perfluorinated groups of the side chains. The relationship between orientations of the fluorinated side chains and performances of polymer surfaces were further investigated by near-edge X-ray fine absorption structure (NEXAFS) experiments and differential scanning calorimetry (DSC).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Monolayer Formation on Aluminum-Doped Zinc Oxide Thin Films

The optical and electronic properties of aluminum-doped zinc oxide (AZO) thin films on a glass substrate are investigated experimentally and theoretically. Optical studies with coupling in the Kretschmann configuration reveal an angle-dependent plasma frequency in the mid-IR for p-polarized radiation, suggestive of the detection of a Drude plasma frequency. These studies are complemented by oxygen depletion density functional theory studies for the calculation of the charge carrier concentration and plasma frequency for bulk AZO. In addition, we report on the optical and physical properties of thin film adlayers of n-hexadecanethiol (HDT) and n-octadecanethiol (ODT) self-assembled monolayers (SAMs) on AZO surfaces using reflectance FTIR spectroscopy, X-ray photoelectron spectroscopy (XPS), contact angle, and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Our characterization of the SAM deposition onto the AZO thin film reveals a range of possible applications for this conducting metal oxide.

36 MATERIALS SCIENCE↗

Surface-Bound Soft Matter Gradients

This feature article describes the progress realized over the past half century in the field of surface-bound gradient structures created on or from soft materials (oligomers and/or polymers), or those enabling the study of the behavior of soft materials. By highlighting our work in the field and accounting for the contribution of other groups, we emphasize the exceptional versatility of gradient assemblies in facilitating fast screening of physicochemical phenomena, acting as 'recording media' for monitoring a process, and playing a key role in the design and fabrication of surface-bound molecular and macromolecular motors capable of directing a transport phenomenon.

36 MATERIALS SCIENCE↗