Engineering topics
Publications and source records attributed to Gates, D. W..
Use of decomposable precursors to enhance zinc oxide-titanium dioxide reaction and rapid fixing results in rapid preparation of zinc orthotitanate powder pigment. Preparation process allows production under less stringent conditions. Elimination of powder grinding results in purer that is less susceptible to color degradation.
Zinc orthotitanate suitable for use as a pigment for spacecraft thermal control coatings is prepared by heating a slightly zinc deficient reaction mixture of precipitated oxalates of zinc and titanium. The reaction mixture can be formed by coprecipitation of zinc and titanium oxalates from chloride solution or by mixing separately precipitated oxalates. The mixture is first heated to 400 to 600 C to remove volatiles and is then rapidly heated at 900 to 1200 C. Zinc orthotitanate produced by this method exhibits the very fine particle size needed for thermal control coatings as well as stability in a space environment.
Silver crystals were grown aboard Skylab 4 by an electro-chemical reaction and subsequently returned to earth for comparison with crystals grown at 1- and 5-g. Both the Skylab and earth-grown crystals show a variety of structures. Certain tendencies in structure dependency on gravity level, however, can be discerned. In addition, downward growing dendrite streamers; upward growing chunky crystal streamers; growth along an air/liquid interface; and ribbon, film, and fiber crystal habits were observed in experiments conducted on the ground with solutions of varying concentrations. It was also observed that the crystal structures of space and ground electro-deposited silver crystals were very similar to the structures of germanium selenide and germanium telluride crystals grown in space and on the ground by a vapor transport technique. Consideration of the data leads to the conclusions that: (1) the rate of electrochemical displacement of silver ions from a 5 percent aqueous solution by copper is predominantly diffussion controlled in space and kinetically controlled in 1- and higher-g because of augmentation of mass transport by convection; (2) downward and upward crystal streamers are the result of gravity-driven convection, the flow patterns of which can be delineated. Lateral growths along an air/liquid interface are the result of surface-tension-driven convection, the pattern of which also can be delineated; (3) electrolysis in space or low-g environments can produce either dendritic crystals with more perfect microcrystalline structures or massive, single crystals with fewer defects than those grown on ground or at higher g-levels. Ribbons or films of space-grown silicon crystals would find a ready market for electronic substrate and photocell applications. Space-grown dendritic, metal crystals present the possibility of unique catalysts. Large perfect crystals of various materials are desired for a number of electronic and optical applications; and (4) vapor transport growth of germanium selenide and germanium telluride is affected by convection mechanisms similar to the mechanisms hypothesized for the electrochemical deposition of silver crystals. Evidence and considerations leading to the preceding summaries and conclusions are presented. The implications of the findings and conclusions for technological applications are discussed, and recommendations for further experiments are presented.
A comprehensive program to develop low solar absorptance/high emittance coatings, to be successful, must coordinate basic materials preparation, coatings technology, environmental simulation, production, and flight-test evaluation. The prime criteria for 'white' thermal-control coatings are low solar absorptance and, most importantly, solar-absorptance stability. Many variables affect the solar absorptance and its stability. These effects must be discerned and evaluated. The factors involved, however, are not entirely independent; accordingly, the present paper emphasizes the major variables, the relationships among them, and how important they are in improving the properties and performance of the coatings.
An extensive program has been developed to identify, collect, extract, analyze, and disseminate thermal radiative property data on materials of use to the aerospace endeavors under conditions likely to exist in their application. The properties examined include thermal emittance, reflectance, absorptance, and transmittance. Reference is made to the coverage of the results which is organized in three major volumes, representing the most comprehensive treatment on this subject matter.
The state-of-the-art of spacecraft thermal-control materials technology has been significantly advanced during the past 4 years. Selective black coatings are discussed together with black paints, dielectric films on metal surfaces, and white radiator coatings. Criteria for the selection of thermal-control surfaces are considered, giving attention to prelaunch protection, the capability of being measured, reproducibility, simulator response, and aspects of a nonindigenous space environment. Progress in space simulation is related to vacuum technology, ultraviolet sources, solar wind simulation, and the production of protons. Advances have been made in the protection against space environmental effects, and in the development of thermal-control surfaces and pigments.
Potassium silicate-treated zinc oxide paint stabilizes pigment against ultraviolet-induced, bleachable degradation in infrared region, and permits use of ZnO as pigment in ultraviolet-stable coatings based upon polymethyl siloxane elastomers and resins. Material has low absorptance/emittance ratio.
Binder stabilized zinc oxide pigmented coating for spacecraft thermal control
Bibliography lists, the sources containing emissivity and absorptivity data on materials at extremely high temperatures. The experimental techniques, equipment and efforts of the experimenters to characterize the materials used and methods to evaluate the errors are given in the sources in this bibliography.
Selected bibliography and abstracts of high temperature optical properties and measurements
Quantitative data on photometric, luminescence, light polarization, color, infrared temperature, and microwave temperature properties of moon
Spacecraft surface temperature-control coating requirements, selection and performance in prelaunch and space environments
Spacecraft surface temperature-control coating requirements, selection and performance in prelaunch and space environments
Properties, availability and fabricability of materials for electric arc-jet engines
Bibliography - refractory inorganic coatings for temperatures over 2500-deg c
Materials problems related to electric arc jets
Description of arc jet engines, with some of the operational parameters pertinent to the selection of materials
Explore the source record for details and available documents.