Engineering Papers⌕ Search

Engineering topics

Gasper, Paul

Publications and source records attributed to Gasper, Paul.

31 records · Page 2

DEPRECATED AI-Batt-OS (Autonomous Identification of Battery Life Models - Open Source) [SWR 21-17]

DEPRECATED. This repository was archived by the owner on Jun 30, 2026. It is now read-only. Open source implementation of some of the methods utilized by AI-Batt, a battery lifetime modeling and analysis toolkit provided by the National Laboratory of the Rockies (NLR). This software demonstrates the use of bi-level optimization and symbolic regression techniques to semi-autonomously identify algebraic models predicting the capacity fade of lithium-ion batteries during calendar aging. Modeling the degradation of batteries is a complex task, due to the difficulty in separating the time-dependent and time-independent factors impacting cell level degradation, across multiple data series with different numbers of measurements and/or data quality. Bi-level optimization enables model parameters to be optimized to either the entire data set or to individual data series, allowing statistical disambiguation of global behaviors (data series independent) and local behaviors (data series dependent). Symbolic regression is used to automatically search for optimal low-dimesional models predicting the variation of locally optimized parameters versus time-independent experimental variables from millions of possible models, resulting in a more accurate and repeatable model identification process than is possible by a manual search. The provided tools also implement cross-validation and bootstrap resampling schemes, empowering statistical model comparison/selection and quantification of model uncertainties. An example script replicates the results from the manuscript "Challenging Practices of Algebraic Battery Life Models through Statistical Validation and Model Identification via Machine-Learning", submitted to ECS. All code is written in MATLAB. Requires the Statistics and Machine Learning Toolbox. Contact Dr. Paul Gasper at Paul.Gasper@nlr.gov for any questions.

Gasper, Paul↗

Extended cycle life implications of fast charging for lithium-ion battery cathode

Enabling extreme fast charging (XFC, =10–15 min charging) requires a comprehensive understanding of its implications. While lithium plating is a key bottleneck for the anode, the full extent of limitations for the cathode are not well-understood, particularly in extended-cycle settings with well-defined battery designs and conditions. This article presents cycle-life implications of XFC on cathodes at multiple length scales, combining electrochemical analyses, degradation modeling, and post-test characterizations. The comprehensive test matrix includes 41 well-defined gr/NMC pouch cells under varied fast-charge rates (1–9C) and state-of-charges cycled up to 1000 times. Cathode issues remain minimal in early cycling, but begin to accelerate in later life, when distinct cracking is found and identified as a fatigue mechanism. The bulk structure of cathodes remains intact, but distinct particle surface reconstruction is observed; however, this shows less pronounced effect on cathode aging than does cracking.

25 ENERGY STORAGE↗

Predictive Battery Lifetime Modeling at NREL [Slides]

Battery lifetime models are used to extrapolate data from accelerated aging tests to simulate degradation in real-world applications such as electric vehicles and battery energy storage systems. Methods developed at NREL utilize both expert domain-knowledge and machine-learning to identify models, using statistical methods such as cross-validation and bootstrap resampling to interrogate model performance and quantify uncertainty. These models can be utilized in systems level simulations to predict battery performance or technoeconomic models to estimate the lifetime cost of battery systems.

25 ENERGY STORAGE↗

Early Battery Performance Prediction for Mixed Use Charging Profiles Using Hierarchal Machine Learning

A key step limiting how fast batteries can be deployed is the time necessary to provide evaluation and validation of performance. Using data analysis approaches, such as machine learning, the validation process can be accelerated. However, questions on the validity of projecting models trained on limited data or simple cycling profiles, such as constant current cycling, to real-world scenarios with complex loads remains. Here, we present the ability to predict performance with less than 1.2% mean absolute percent error when trained on cells aged using complex electric vehicle discharge profiles, and either AC Level 2 charge or DC Fast charge profiles, using only the first 45 cycles, namely 5% of the total testing time. While error is low across the projections, this study also highlights that battery lifetime analysis using only cycling data may not extrapolate safely to certain real-world conditions due to the impact of calendar degradation.

25 ENERGY STORAGE↗

Challenging Practices of Algebraic Battery Life Models through Statistical Validation and Model Identification via Machine-Learning

Various modeling techniques are used to predict the capacity fade of Li-ion batteries. Algebraic reduced-order models, which are inherently interpretable and computationally fast, are ideal for use in battery controllers, technoeconomic models, and multi-objective optimizations. For Li-ion batteries with graphite anodes, solid-electrolyte-interphase (SEI) growth on the graphite surface dominates fade. This fade is often modeled using physically informed equations, such as square-root of time for predicting solvent-diffusion limited SEI growth, and Arrhenius and Tafel-like equations predicting the temperature and state-of-charge rate dependencies. In some cases, completely empirical relationships are proposed. However, statistical validation is rarely conducted to evaluate model optimality, and only a handful of possible models are usually investigated. This article demonstrates a novel procedure for automatically identifying reduced-order degradation models from millions of algorithmically generated equations via bi-level optimization and symbolic regression. Identified models are statistically validated using cross-validation, sensitivity analysis, and uncertainty quantification via bootstrapping. On a LiFePO 4 /Graphite cell calendar aging data set, automatically identified models utilizing square-root, power law, stretched exponential, and sigmoidal functions result in greater accuracy and lower uncertainty than models identified by human experts, and demonstrate that previously known physical relationships can be empirically "rediscovered" using machine learning.

25 ENERGY STORAGE↗

SISSO (Sure-independence-screening sparsifying-operator regressor)

Implementation of the SISSO regression algorithm in MATLAB. The SISSO regression algorithm iteratively selects model features from candidates, converging even when the number of possible features is much greater than the number of available data points. Includes a test script that validates the algorithm by replicating the results using data and procedure from https://analytics-toolkit.nomad-coe.eu/hub/user-redirect/notebooks/tutorials/compressed_sensing.ipynb. Python code from the SISSO regressor in 'sisso.py', from the link above, was used as the basis for developing the MATLAB implementation. The SISSO regression algorithm is detailed by the original authors in R. Ouyang, S. Curtarolo, E. Ahmetcik et al., Phys. Rev. Mater. 2, 083802 (2018), R. Ouyang, E. Ahmetcik, C. Carbogno, M. Scheffler, and L. M. Ghiringhelli, J. Phys.: Mater. 2, 024002 (2019).

Gasper, Paul↗

Auto-BLAST (AutoBLAST) [SWR-20-93]

Battery life modeling often involves a lot of manual parameter fitting and is not easy for users to adopt the model and use it. To reduce the difficulties for users to adopt battery lifetime models, an automatic battery lifetime modeling analysis and simulation tool suite, Auto-BLAST, has been developed. Auto-BLAST includes a lithium-loss-base life model, a battery electric model, and an algorithm which automatically fits all key parameters in the electric and life models using user provided data. The models and algorithm are packaged into two user-friendly GUIs, Auto-LifeMod, for easy battery life prognostic model fitting and Auto-LifeSim, for easy battery lifetime simulation. The lithium-loss-based life model adopts a similar model framework that models degradations using aging rate models, using battery cycling data to predict battery degradation and expected lifetime. The electric model is an equivalent circuit model which simulates battery voltage responses based on current/power demand profiles. The auto-fitting algorithm uses the user-input data to generate custom battery life model(s). Two GUIs, wrapping around the life model and the auto-fitting algorithm, provide friendly interfaces for users to generate a life model and use it for case study. One GUI requires summary data from accelerated battery life degradation tests as an input and produces battery life models predicting (a) capacity degradation, and (b) resistance growth of the battery. The GUI displays the electrical model response and the input experimental data against the life model predictions with fitted model parameters and fitting error. The GUI also generates an output file to save the fitted model parameters. The second GUI uses the life model from the first GUI and a user-defined battery cycling profile to predict battery lifetime degradation and expected lifetime. Predicted capacity and resistance vs. time are plotted in the GUI and saved to output file. There is a user guide for both GUIs

Mishra, Partha↗

Shell Predictive Battery Life Models (SPBLM) [SWR-20-35]

Battery life models to predict the capacity fade and resistance growth of lithium-ion batteries from various manufacturers with different chemistries. The battery life model is trained on experimental test data, and accounts for calendar and cycling aging mechanisms as functions of cell environmental conditions and use. The battery life model is then used to predict capacity fade and resistance growth under any arbitrary aging scenario.

Smith, Kandler↗

Co-infiltration of Nickel and Mixed Conducting Gd 0.1 Ce 0.9 O 2-δ and La 0.6 Sr 0.3 Ni 0.15 Cr 0.85 O 3-δ Phases in Ni-YSZ Anodes for Improved Stability and Performance

Liquid-phase infiltration of nickel (Ni) nanoparticles in Ni/yttria-stabilized-zirconia (YSZ) cermet anodes for solid oxide fuel cells can improve anode performance provided that the infiltrated nanoparticles on YSZ connect to form conducting pathways and the Ni nanoparticles do not coarsen significantly. This study explores liquid phase co-infiltration of Ni with mixed conducting oxides, the latter providing microstructural stability and conductive pathways between Ni nanoparticles. Two mixed conducting oxides have been studied: Gd 0.1 Ce 0.9 O 2-δ (GDC), a predominantly ionic conductor, and La 0.6 Sr 0.3 Ni 0.15 Cr 0.85 O 3-δ (LSNC), a predominantly electronic conductor. Experimental results show that both oxides improve the nickel nanoparticle stability and charge transfer kinetics. However, the electrochemical performance of the Ni-GDC-infiltrated electrode is much better than that of the Ni-LSNC-infiltrated electrode. This is attributed to the citrate–nitrate combustion reaction required to form LSNC, which fills the pores of the anode and inhibits gas diffusion, reducing the performance of the Ni-LSNC-infiltrated electrode.

25 ENERGY STORAGE↗

IMPROVING ELECTROCHEMICAL PERFORMANCE OF NICKEL – YTTRIA STABILIZED ZIRCONIA CERMET ANODES EMPLOYING NICKEL NANOPARTICLES

Nickel-Yttria Stabilized Zirconia (Ni-YSZ) cermets are used as anodes in solid oxide fuel cells. These anodes are stable for tens of thousands of hours during operation and have low cost. In this work, Ni-YSZ anodes are infiltrated with nickel nanoparticles to increase the density of electrochemical reaction sites and improve their performance. However, infiltrated nickel nanoparticles are isolated from one another, so they are not electrochemically active. Two approaches have been utilized to activate infiltrated nickel nanoparticles: in-situ nickel spreading and simultaneous infiltration of nickel with Gd0.1Ce0.9O2-δ (GDC). In-situ nickel spreading, which occurs during exposure to anodic mass transfer limited currents, connects and activates nickel nanoparticles, improving anode performance but inherently causing nanoparticle coarsening. Simultaneous infiltration of Ni and GDC results in substantially improved anode performance, and the infiltrated nanostructures are more stable than infiltrated nickel. Detailed analysis of the electrochemical impedance by equivalent circuit modeling is used to separate the contributions of nickel and GDC infiltrants to the overall cell performance.

Gasper, Paul↗

Nanoparticle deposition in porous and on planar substrates

A method of preparing a metal nanoparticle on a surface includes subjecting a metal source to a temperature and a pressure in a carrier gas selected to provide a vapor metal species at a vapor pressure in the range of about 10−4 to about 10−11 atm; contacting the vapor metal species with a heated substrate; and depositing the metal as a nanoparticle on the substrate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗