Engineering Papers⌕ Search

Engineering topics

Gaspar, Daniel J

Publications and source records attributed to Gaspar, Daniel J.

Synthesis and characterization of p-type conductivity dopant 2-(3-(adamantan-1-yl)propyl)-3,5,6-trifluoro-7,7,8,8-tetracyanoquinodimethane

We report the synthesis and characterization of 2-(3-(adamantan-1-yl)propyl)-3,5,6-trifluoro-7,7,8,8-tetracyanoquinodimethane (F3TCNQ-Ad1), a substituted analog of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), designed for p-type conductivity doping. The dopant is designed as a model for substituted alternatives to F4TCNQ that maintain similar electronic properties with the goal of engineering dopants with superior fabrication characteristics over F4TCNQ. We describe the design strategy for F3TCNQ-Ad1 based on molecular modeling predictions that substitution of a single fluorine atom of F4TCNQ has little effect on the electronic properties of the molecule. Photophysical and electrochemical characterization reveal that the adamantyl substituent in F3TCNQ-Ad1 does not significantly alter the electronic properties of the substituted dopant relative to F4TCNQ. Unfortunately, F3TCNQ-Ad1 degrades under standard sublimation conditions, preventing sublimation deposition processing. Instead, hole-only devices were made via solution-processing of the p-doped films with the structure glass/ITO/2.3 x103Å PVK:(MTDATA:dopant)/2.0x102Å Au/1.0x103Å Al, where dopant is either F4TCNQ or F3TCNQ-Ad1. We demonstrate that F3TCNQ-Ad1 increased the conductivity of the films by at least 1,000 times compared to an undoped device.

Rainbolt, James E↗

Tuning the Optical Properties of Mesoporous TiO2 Films by Nanoscale Engineering

Introducing mesoscale pores into spincoated titanium dioxide films, prepared by spincoating different sol-gel precursor solutions on silicon substrates and subsequent annealing at 350 C, 400 C or 450 C, respectively, affects several optical properties of the material. The change in refractive index observed for different mesoporous anatase films directly correlates with changes in pore size, but is also in a more complex manner influenced by the film thickness and the density of pores within the films. Additionally, the band gap of the films is blueshifted by the stress the introduction of pores exerts on the inorganic matrix. The differently sized pores were templated by Pluronic{reg_sign} block copolymers in the solgel solutions and tuned by employing different annealing temperatures for the film preparation. This study focused on elucidating the effect different templating materials (F127 and P123) have on the pore size of the final mesoporous titania film, and on understanding the relation of varying polymer concentration (taking P123 as an example) in the sol-gel solution to the pore concentration and size in the resultant titania film. Titania thin film samples or corresponding titanium dioxide powders were characterized by X-ray diffraction, nitrogen adsorption, ellipsometery, UV/Vis spectrometry and other techniques to understand the interplay between mesoporosity and optical properties.

36 MATERIALS SCIENCE↗

7,7,8,8-Tetracyanoquinodimethane based molecular dopants for p-type doping of OLEDs: A theoretical investigation

The array of organic conductivity dopants used for organic light emitting devices (OLED) to reduce the operating voltage and improve power efficiency is extremely limited. Here we report a comparative theoretical study between newly proposed analogs and the standard state-of-the-art conductivity dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). We used density functional theory to determine the bond lengths, bond angles and electronic properties, such as the energy of the highest occupied molecular orbital (E{sub HOMO}) and lowest occupied molecular orbital (E{sub LUMO}) states, as well as the triplet energies of the novel structures (ET). The ground state structures of the proposed molecules were optimized at the B3LYP/6-31G* level. The results show that substitution of one or two fluorine groups in the F4-TCNQ core with a substituted phenyl ring or other electron withdrawing moieties, will not substantially affect the geometry of the molecule or its electronic ability to accept electrons. The most significant finding was that the phenyl substitutions onto the TCNQ core are nearly perpendicular to the TCNQ plane, and thus there is no electronic communication between the two rings. This is extremely important, as such extension of the {pi} conjugated system would negatively affect the E{sub LUMO} and thus the electron affinity of the molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Blue phosphorescent organic light-emitting devices utilizing cesium–carbonate-doped 2,4,6-tris(2',4'-difluoro-[1,1'- biphenyl]-4-yl)-1,3,5-triazine

We report an alternative, high yielding synthesis for the known compound 2,4,6-tris(2',4'-difluoro-[1,1'-biphenyl]-4-yl)-1,3,5-triazine, (tris-(dFB)Tz). The lowest occupied molecular orbital energy for tris-(dFB)Tz is calculated to be -3.5 eV via electrochemical characterization. The deep ELUMO of tris-(dFB)Tz affords a material with excellent electron acceptor characteristics for use in n-doped electron transport layers. Tris-(dFB)Tz shows a four order of magnitude increase in the number of carriers upon doping with 8 wt.% Cs2CO3. Enhanced electron injection was also observed upon doping with Cs2CO3, eliminating the need for a LiF injection layer. Blue phosphorescent OLEDs were fabricated using n-doped tris-(dFB)Tz electron transport layers. OLEDs with thick (700Å) Cs2CO3 doped tris-(dFB)Tz electron transport layers had lower operating voltage than OLEDS with an undoped electron transport layer of bis(diphenylphosphoryl)dibenzothiophene (PO15), which has previously been used in low voltage, high efficiency OLEDs. The tris-(dFB)Tz results indicate that aromatic substituted triazines may be promising materials for use as electron acceptors in n-doped organic electronic systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Controlling charge transport in blue organic light-emitting devices by chemical functionalization of host materials

Generation of white light from OLEDs for general lighting applications requires a highly efficient blue component. However, a stable and power efficient blue OLED component with simple device architecture remains a significant challenge partly due to lack of appropriate host materials. Here we report the photophysical and device properties of ambipolar host phosphine oxide based materials. In this work, we studied the effect of the structural modification made to phosphine oxide-based hosts on the charge balance. We observed significant changes in charge transport within the host occurred upon small modifications to their chemical structure. As a result, an alteration of the chemical design of these materials allows for the control of charge balance of the OLED.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Highly efficient blue organic light emitting devices with indium-free transparent anode on flexible substrates

Indium-free transparent conducting oxides may provide a lower cost solution for the transparent anode in flexible displays and energy efficient solid state lighting. We report herein a near room temperature sputtering process for generating an indium-free transparent conductive oxide (TCO) coating on a flexible substrate. Specifically, we deposited gallium-doped zinc oxide (GZO) uniformly over a 12” diameter area at room temperature on polyethylene terephthalate (PET). During deposition, the system heats to about 60oC due to the energetic sputtering conditions, without any noticeable damage to the PET substrate. The GZO films exhibit excellent physical, optical and electrical properties: roughness ~7 nm, transmittance >85% and resistivity ~ 10-3 ohm• cm. Phosphorescent blue organic light-emitting devices (OLEDs) were fabricated on these substrates with comparable performance (16% external quantum efficiency and 33 lm/W power efficiency at 1mA/cm2) to that of devices fabricated on GZO (or ITO) deposited on glass substrates, suggesting flexible GZO/PET substrates may be used instead of high-cost and rigid ITO and glass for flexible displays and solid state lighting.

36 MATERIALS SCIENCE↗

Secondary Ion Mass Spectrometry of Environmental Aerosols

Atmospheric particles influence many aspects of climate, air quality and human health. Understanding the composition, chemistry and behavior of atmospheric aerosols is a key remaining challenge in improving climate models. Furthermore, particles may be traced back to a particular source based on composition, stable isotope ratios, or the presence of particular surface chemistries. Finally, the characterization of atmospheric particles in the workplace plays an important role in understanding the potential for exposure and environmental and human health effects to engineered and natural nanoscale particles. Secondary ion mass spectrometry (SIMS) is a useful tool in determining any of several aspects of the structure, composition and chemistry of these particles. Often used in conjunction with other surface analysis and electron microscopy methods, SIMS has been used to determine or confirm reactions on and in particles, the presence of particular organic species on the surface of atmospheric aerosols and several other interesting and relevant findings. Various versions of SIMS instruments – dynamic SIMS, time of flight secondary ion mass spectrometry or TOF-SIMS, nanoSIMS – have been used to determine specific aspects of aerosol structure and chemistry. This article describes the strengths of each type of SIMS instrument in the characterization of aerosols, along with guidance on sample preparation, specific characterization specific to the particular information sought in the analysis. Examples and guidance are given for each type of SIMS analysis.

54 ENVIRONMENTAL SCIENCES↗

Highly efficient blue organic light emitting device using indium-free transparent anode Ga:ZnO with scalability for large area coating

The availability of economically-produced and environmentally-stable transparent conductive oxide (TCO) coatings is critical for the development of a variety of electronic devices requiring transparent electrodes. Such devices include liquid crystal display pixels and organic light emitting diodes (OLEDs),[1, 2] solar cell applications,[3, 4] and electrically heated windows.[5, 6] The materials fulfilling these requirements are usually wide band gap inorganic transparent conductive oxides (TCOs). Tin-doped indium oxide, or ITO, has traditionally been used for electronic TCO applications because of its low resistivity, high work function and transparency. Due to the increasing cost and limited supply of indium and its tendency to migrate in to the device, there has been increasing research interest to substitute ITO with an indium-free material. A number of alternative metal oxides and doped oxides have been evaluated as TCO materials with varying degrees of success.[7, 8] Among these alternatives to ITO, gallium-doped zinc oxide (GZO) [2, 9] and aluminium-doped zinc oxide (AZO) [10, 11] have drawn particular attention. These materials have been demonstrated to have resistivities and transparencies approaching those of the best ITO, low toxicity, and much lower materials cost. Although AZO is attractive as a TCO electrode material, GZO features a greater resistance to oxidation as a result of gallium’s greater electronegativity compared to Submitted to 2 aluminum.[12, 13

14 SOLAR ENERGY↗

Application of Surface Chemical Analysis Tools for Characterization of Nanoparticles

The important role that surface chemical analysis methods can and should play in the characterization of nanoparticles is described. The types of information that can be obtained from analysis of nanoparticles using Auger electron spectroscopy (AES); X-ray photoelectron spectroscopy (XPS); time of flight secondary ion mass spectrometry (TOF-SIMS); low energy ion scattering (LEIS); and scanning probe microscopy (SPM), including scanning tunneling microscopy (STM) and atomic force microscopy (AFM), are briefly summarized. Examples describing the characterization of engineered nanoparticles are provided. Specific analysis considerations and issues associated with using surface analysis methods for the characterization of nanoparticles are discussed and summarized, along with the impact that shape instability, environmentally induced changes, deliberate and accidental coating, etc., have on nanoparticle properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-efficiency turquoise-blue electrophosphorescence from a Pt(II)-pyridyltriazolate complex in phosphine oxide host

We have demonstrated high-efficiency turquoise-blue electrophosphorescence from the complex Pt(ptp)2 = bis[3,5–bis(2–pyridyl)–1,2,4–triazolato]platinum(II) doped in the wide band-gap, ambipolar phosphine oxide host HM-A1 = 4-(diphenylphosphoryl)-N,N-diphenylaniline. For devices with 5% Pt(ptp)2 doping in HM-A1, we have achieved a peak external quantum efficiency and power efficiency of (11.8 ± 0.6) % and (61.2 ± 5.9) lm/W with high-pixel values of 13.1 % and 70.6 lm/W, respectively. These parameters maintained (10.6 ± 0.2) % and (40.3 ± 1.2) lm/W at a brightness of 1000 cd/m2 with high-pixel values of 10.8 % and 41.6 lm/W. Examination of several device structures suggests that the high performance is due to improved charge transport and exciton confinement in the emissive region. Devices with 1-10% doping concentration exhibit turquoise-blue emissions (λmax ~ 480 nm) with a monotonic decrease in monomer/excimer intensity ratio upon increasing the doping concentration. Devices with 5% doping exhibit sufficient blue contribution to attain white light upon combination with highly-doped or neat emissive layers of the same phosphor; the work herein represents a significant backdrop toward optimizing such white OLEDs given the performance metrics above, which to our knowledge represent the highest performance for OLEDs that exhibit blue emission maxima.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of large area transparent conducting oxides from a combinatorial lead for organic solid state lighting

Organic light emitting device (OLEDs) may provide a low-cost, long-lived, and efficient wide area lighting solution if a number of challenges in reliability, cost and efficiency can be overcome. There is a need to develop new TCOs for use as the anode in a bottom-emitting device that do not contain In, have optimal work function, conductivity and visible light transmission properties, possess acceptable stability and possess a high work function to match the deep HOMO of blue OLED HTLs. We report here results from our efforts to scale up sputter deposition on large area substrates (up to 12”x12”) of TCO candidates (including Ga:ZnO and Zn:SnO) identified using combinatorial methods. We present transmission, electrical properties, work function, compositional and structural data for these films. Finally, we have evaluated the use of these materials in OLEDs, and show device performance comparisons between devices fabricated on combinatorial substrates, single composition substrates, and substrates grown at larger scale (up to 12”x12”). Post-operation analysis of the materials using a combination of surface analysis and electron microscopy techniques was performed. The device results demonstrate that we are able to generate substrates with the appropriate work function to reduce the operating voltage of blue phosphorescent OLEDs compared to commercial ITO, which we ascribe to improved work function-HOMO energy matching leading to more efficient charge injection into the device HTL.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Tuning charge balance in PHOLEDs with ambipolar host materials to achieve high efficiency

The efficiency and stability of blue organic light emitting devices (OLEDs) continue to be a primary roadblock to developing organic solid state white lighting. For OLEDs to meet the high power conversion efficiency goal, they will require both close to 100% internal quantum efficiency and low operating voltage in a white light emitting device.1 It is generally accepted that such high quantum efficiency, can only be achieved with the use of organometallic phosphor doped OLEDs. Blue OLEDs are particularly important for solid state lighting. The simplest (and therefore likely the lowest cost) method of generating white light is to down convert part of the emission from a blue light source with a system of external phosphors.2 A second method of generating white light requires the superposition of the light from red, green and blue OLEDs in the correct ratio. Either of these two methods (and indeed any method of generating white light with a high color rendering index) critically depends on a high efficiency blue light component.3 A simple OLED generally consists of a hole-injecting anode, a preferentially hole transporting organic layer (HTL), an emissive layer that contains the recombination zone and ideally transports both holes and electrons, a preferentially electron-transporting layer (ETL) and an electron-injecting cathode. Color in state-of-the-art OLEDs is generated by an organometallic phosphor incorporated by co-sublimation into the emissive layer (EML).4 New materials functioning as hosts, emitters, charge transporting, and charge blocking layers have been developed along with device architectures leading to electrophosphorescent based OLEDs with high quantum efficiencies near the theoretical limit. However, the layers added to the device architecture to enable high quantum efficiencies lead to higher operating voltages and correspondingly lower power efficiencies. Achievement of target luminance power efficiencies will require new strategies for lowering operating voltages, particularly if this is to be achieved in a device that can be manufactured at low cost. To avoid the efficiency losses associated with phosphorescence quenching by back-energy transfer from the dopant onto the host, the triplet excited states of the host material must be higher in energy than the triplet excited state of the dopant.5 This must be accomplished without sacrificing the charge transporting properties of the composite.6 Similar problems limit the efficiency of OLED-based displays, where blue light emitters are the least efficient and least stable. We previously demonstrated the utility of organic phosphine oxide (PO) materials as electron transporting HMs for FIrpic in blue OLEDs.7 However, the high reluctance of PO materials to oxidation and thus, hole injection limits the ability to balance charge injection and transport in the EML without relying on charge transport by the phosphorescent dopant. PO host materials were engineered to transport both electrons and holes in the EML and still maintain high triplet exciton energy to ensure efficient energy transfer to the dopant (Figure 1). There are examples of combining hole transporting moieties (mainly aromatic amines) with electron transport moieties (e.g., oxadiazoles, triazines, boranes)8 to develop new emitter and host materials for small molecule and polymer9 OLEDs. The challenge is to combine the two moieties without lowering the triplet energy of the target molecule. For example, coupling of a dimesitylphenylboryl moiety with a tertiary aromatic amine (FIAMBOT) results in intramolecular electron transfer from the amine to the boron atom through the bridging phenyl. The mesomeric effect of the dimesitylphenylboryl unit acts to extend conjugation and lowers triplet exciton energies (< 2.8 eV) rendering such systems inadequate as ambipolar hosts for blue phosphors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design of new anchored p-dopants for high power efficiency OLEDs

Conductivity doping of charge transporting layers is increasingly becoming attractive for improving power efficiency in OLEDs. However, the number of organic molecular p-dopants is limited for instance the electron acceptor 2,3,5,6-tetrafluoro-7,7,8,8,-tetracyanoquinodimethane (F4-TCNQ) is the most utilized p-dopant. F4-TCNQ can dope most hole transporting materials (HTL), but it is very volatility, and has a low sticking coefficient thus difficult to deposit. Here we present the design of anchored molecular dopants based on the TCNQ core. We first review how the reduction potential of TCNQ core is affected by substitution with alkyl groups of different electronic properties. Electron donating groups have negative effect on the reduction potential of the acceptor. However, attaching electron withdrawing groups such as halogens counteracts the effect of electron donating groups. Using gas phase theoretical calculations we determined that trifluorinated TCNQ can be anchored through a σ-coupled alkyl chain to an inert molecular anchor without sacrificing the electron affinity.

42 ENGINEERING↗

Development of a Micropyrolyzer for Enhanced Isotope Ratio Measurement

This paper presents design, fabrication and testing of a micro scale reactor for the pyrolysis of organic compounds. The reactor system described here is suitable for use in enhanced isotope ratio measurement in a continuous flow mode. A characteristic of such a system is it can be utilized to pyrolyze organic compounds with sample size 20-50 times smaller than conventional. Results have shown that organic compounds, such as 1-butanol, ethanol, and ethanol amine, can be fully decomposed to desired products CO and H2, at temperature of 1200oC, which is 200oC lower than conventionally reported. Undesired products methane and CO2 are eliminated in the pyrolysis process. The proof-of-concept experimental results clearly demonstrate that the micro pyrolyzer can be readily integrated with isotope ratio mass spectrometer (IRMS) to differentiate between different sources of the same materials.

03 NATURAL GAS↗

Fate and transport of titania nanoparticles in freshwater mesocosms

Titania nanoparticles are currently associated with air, soil, and water and with numerous products directed at human use and consumption (e.g., sunscreen, cosmetics, and food coatings). The environmental fate and transport of TiO2, or any nanomaterials entering dynamic aquatic environments are largely unknown. Because the physical and chemical properties of TiO2 are variable (size, surface chemistry, and composition), the movement, bioaccumulation, and toxicity of these materials are difficult to study in a complex ecosystem. Many metal oxide materials are durable and recalcitrant, and the accumulation of TiO2 in the environment could be significant over time and cause unforeseen impacts on ecosystems. Fate and transport of TiO2 nanomaterials in a bench-scale mesocosm system was assessed through nanomaterial partitioning and complexation in water, sediment, and tissue media characterized using inductively coupled plasma mass spectrometry and scanning electron microscopy with energy dispersive X-ray spectroscopy, respectively. Research data sets like these will build the foundation for future use in fate and transport of other nanomaterials in different water systems (fresh, estuarine, and marine) and in building empirical and process models that investigate environmental fate and transport and relevant freshwater ecological impacts of nanomaterials.

54 ENVIRONMENTAL SCIENCES↗

Characterization Challenges for Nanomaterials

Nanostructured materials are increasingly subject to nearly every type of chemical and physical analysis possible. Because of their small feature size there is a significant focus on tools with high spatial resolution. Because of their high surface area, it is also natural to characterize nanomaterials using tools designed to analyze surfaces. Regardless of the approach, nanostructured materials present a variety of obstacles to adequate, useful and needed analysis. This paper provides short overviews to some of the issues and complications including: particle stability, environmental effects, specimen handling, surface coating, contamination and time. Some specific examples are provided from a our work focused on ceria nanoparticles and iron metal-core/oxide-shell nanoparticles in which we use a combination of tools for routine analysis including XPS, TEM, and XRD and apply other methods as needed to obtain essential information.

77 NANOSCIENCE AND NANOTECHNOLOGY↗