Engineering PapersSearch

Engineering topics

Garkanian, Vachik

Publications and source records attributed to Garkanian, Vachik.

Far-Field Pattern Measurement and Simulation of VHF Antenna at 60 MHz for Europa Clipper Mission

This paper presents measurements and simulations of a linearly polarized VHF folded dipole operating at 60 MHz for NASA’s upcoming Europa Clipper mission. The spacecraft contains a ground penetrating radar, consisting of an array of four VHF antennas, that will characterize the surface of Jupiter’s icy moon Europa. Measured far-field radiation patterns and reflection coefficients above a 50×80m perfect ground plane are compared to predicted results using commercial software. Normalized Far-Field radiation pattern cuts are measured utilizing a biconical antenna and receiver mounted on a flying drone. Simulations of the radiation pattern show that the number of lobes increases with the distance of the antenna from the ground due to the ground-bounce phenomenon. In addition, the measured and simulated reflection coefficients stay unchanged for height above 2 meters, which matches the predicted calculation of the reactive-near field region of this antenna. However, the antenna electrical parameters are optimized for use on the spacecraft and become detuned in the presence of a ground plane. Simulated and measured return loss discrepancy less than 0.5 dB is presented. Radiation pattern comparisons show similar agreement when taking into account the effect of far-field measurement uncertainties.

Decrossas, Emmanuel

Diagonal-Axes Stage for Pointing an Optical Communications Transceiver

Traditional azimuth-elevation ("az-el") stages are used to point a variety of devices ranging from large optical telescopes to tank guns. Such a stage typically has an elevation stage having a horizontal axis mounted on an azimuth stage with a vertical axis. Both stages are often motorized. Optical communications transceivers often require two-axis motorized control, as when the communications link is between a ground station and an aircraft or satellite. In such applications, the traditional azimuth-elevation stage has two important drawbacks: a gimbal lock exclusion zone at zenith and susceptibility to pointing errors caused by backlash. Az-el stages in which the azimuth stage cannot rotate a full 360deg have the additional drawback of an azimuth exclusion zone. The diagonal-axes stage described here mitigates or eliminates all of these problems. Instead of one vertical axis and one horizontal axis, a diagonal-axes stage has two horizontal axes, both oriented at 45 to the trajectory of the target. For example, a ground station located on the equator tracking a satellite with an equatorial orbit would have one axis parallel to northeast and southwest, and the other axis parallel to northwest and southeast. The diagonal-axes stage is considerably less vulnerable to backlash. If it is correctly oriented, its axes rotate in only one direction during an overhead pass by a satellite. As a result, the effects of backlash may be inherently eliminated. If the gravity-induced torque on either axis changes during the pass, then backlash may become important during the part of the pass where the gravity torque, instead of opposing the motion of the stage, pushes the stage in the direction of motion. This can result in the loss of gear-to-gear contact in one or more stages of the gear reduction mechanism. In this case, a preload spring used to eliminate backlash need only be sufficiently strong to overcome the gravity torque, i.e. it need not overcome friction in the gear train. The diagonal-axes stage is not backlash-free for arbitrary target trajectories such as an aircraft might execute. If properly oriented for any particular satellite, however, it is backlash-free for all passes of that satellite, which will trace out parallel paths on the sky, and for all passes of any other satellite that are perpendicular to the first. It will also be backlash-free for some fraction of other satellite trajectories.

Regehr, Martin W.