Engineering topics
Gao, Ran
Publications and source records attributed to Gao, Ran.
Observation of solid-state bidirectional thermal conductivity switching in antiferroelectric lead zirconate (PbZrO 3 )
Materials with tunable thermal properties enable on-demand control of temperature and heat flow, which is an integral component in the development of solid-state refrigeration, energy scavenging, and thermal circuits. Although gap-based and liquid-based thermal switches that work on the basis of mechanical movements have been an effective approach to control the flow of heat in the devices, their complex mechanisms impose considerable costs in latency, expense, and power consumption. As a consequence, materials that have multiple solid-state phases with distinct thermal properties are appealing for thermal management due to their simplicity, fast switching, and compactness. Thus, an ideal thermal switch should operate near or above room temperature, have a simple trigger mechanism, and offer a quick and large on/off switching ratio. In this study, we experimentally demonstrate that manipulating phonon scattering rates can switch the thermal conductivity of antiferroelectric PbZrO 3 bidirectionally by –10% and +25% upon applying electrical and thermal excitation, respectively. Our approach takes advantage of two separate phase transformations in PbZrO 3 that alter the phonon scattering rate in different manners. In this study, we demonstrate that PbZrO 3 can serve as a fast (<1 second), repeatable, simple trigger, and reliable thermal switch with a net switching ratio of nearly 38% from ~1.20 to ~1.65 W m –1 K –1 .
Origin of layered perovskite device efficiencies revealed by multidimensional time-of-flight spectroscopy
Mixtures of layered perovskite quantum wells with different sizes form prototypical light-harvesting antenna structures in solution-processed films. Gradients in the bandgaps and energy levels are established by concentrating the smallest and largest quantum wells near opposing electrodes in photovoltaic devices. Whereas short-range energy and charge carrier funneling behaviors have been observed in layered perovskites, our recent work suggests that such light-harvesting processes do not assist long-range charge transport due to carrier trapping at interfaces between quantum wells and interstitial organic spacer molecules. Here, we apply a two-pulse time-of-flight technique to a family of layered perovskite systems to explore the effects that interstitial organic molecules have on charge carrier dynamics. In these experiments, the first laser pulse initiates carrier drift within the active layer of a photovoltaic device, whereas the second pulse probes the transient concentrations of photoexcited carriers as they approach the electrodes. The instantaneous drift velocities determined with this method suggest that the rates of trap-induced carrier deceleration increase with the concentrations of organic spacer cations. Overall, our experimental results and model calculations suggest that the layered perovskite device efficiencies primarily reflect the dynamics of carrier trapping at interfaces between quantum wells and interstitial organic phases.
Strain‐Induced Orbital Contributions to Oxygen Electrocatalysis in Transition‐Metal Perovskites
Abstract Epitaxial strain has been shown to produce dramatic changes to the orbital structure in transition metal perovskite oxides and, in turn, the rate of oxygen electrocatalysis therein. Here, epitaxial strain is used to investigate the relationship between surface electronic structure and oxygen electrocatalysis in prototypical fuel cell cathode systems. Combining high‐temperature electrical‐conductivity‐relaxation studies and synchrotron‐based X‐ray absorption spectroscopy studies of La 0.5 Sr 0.5 CoO 3 and La 0.8 Sr 0.2 Co 0.2 Fe 0.8 O 3 thin films under varying degrees of epitaxial strain reveals a strong correlation between orbital structure and catalysis rates. In both systems, films under biaxial tensile strain simultaneously exhibit the fastest reaction kinetics and lowest electron occupation in the d z 2 orbitals. These results are discussed in the context of broader chemical trends and electronic descriptors are proposed for oxygen electrocatalysis in transition metal perovskite oxides.
Designing Optimal Perovskite Structure for High Ionic Conduction
Solid-oxide fuel/electrolyzer cells are limited by a dearth of electrolyte materials with low ohmic loss and an incomplete understanding of the structure-property relationships that would enable the rational design of better materials. In this work, using epitaxial thin-film growth, synchrotron radiation, impedance spectroscopy, and density-functional theory, the impact of structural parameters (i.e., unit-cell volume and octahedral rotations) on ionic conductivity is delineated in La 0.9 Sr 0.1 Ga 0.95 Mg 0.05 O 3-σ . As compared to the zero-strain state, compressive strain reduces the unit-cell volume while maintaining large octahedral rotations, resulting in a strong reduction of ionic conductivity, while tensile strain increases the unit-cell volume while quenching octahedral rotations, resulting in a negligible effect on the ionic conductivity. Calculations reveal that larger unit-cell volumes and octahedral rotations decrease migration barriers and create low-energy migration pathways, respectively. The desired combination of large unit-cell volume and octahedral rotations is normally contraindicated, but through the creation of superlattice structures both expanded unit-cell volume and large octahedral rotations are experimentally realized, which result in an enhancement of the ionic conductivity. All told, the potential to tune ionic conductivity with structure alone by a factor of ≈ 2.5 at around 600 degrees C is observed, which sheds new light on the rational design of ion-conducting perovskite electrolytes.
Quantifying Intrinsic, Extrinsic, Dielectric, and Secondary Pyroelectric Responses in PbZr 1–x Ti x O 3 Thin Films
Applications such as solid-state waste-heat energy conversion, infrared sensing, and thermally-driven electron emission rely on pyroelectric materials (a subclass of dielectric piezoelectrics) which exhibit temperature-dependent changes in polarization. Although enhanced dielectric and piezoelectric responses are typically found at polarization instabilities such as temperature- and chemically induced phase boundaries, large pyroelectric effects have been primarily limited in study to temperature-induced phase boundaries. Here in this paper, we directly identify the magnitude and sign of the intrinsic, extrinsic, dielectric, and secondary pyroelectric contributions to the total pyroelectric response as a function of chemistry in thin films of the canonical ferroelectric PbZr$_{1-x}$Ti$_x$O$_3$ (x = 0.40, 0.48, 0.60, and 0.80) across the morphotropic phase boundary. Using phase-sensitive frequency and applied dc-bias methods, the various pyroelectric contributions were measured. It is found that the total pyroelectric response decreases systematically as one moves from higher to lower titanium contents. This arises from a combination of decreasing intrinsic response (-232 to -97 μC m$^{-2}$ K$^{-1}$) and a sign inversion (+33 to -17 μC m$^{-2}$ K$^{-1}$)) of the extrinsic contribution upon crossing the morphotropic phase boundary. Additionally, the measured secondary and dielectric contributions span between -70 and -29 and 10-115 μC m$^{-2}$K$^{-1}$) under applied fields, respectively, following closely trends in the piezoelectric and dielectric susceptibility. These findings and methodologies provide novel insights into the understudied realm of pyroelectric response.