Engineering Papers⌕ Search

Engineering topics

Gangrade, Sudershan

Publications and source records attributed to Gangrade, Sudershan.

At least 19 records

CMIP6-based Multi-model Streamflow Projections over the Conterminous US, Version 1.1

This dataset presents an ensemble of streamflow projections covering the conterminous United States (CONUS), developed to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). Multiple Coupled Models Intercomparison Project phase 6 (CMIP6) Global Climate Models (GCMs) were downscaled using either statistical (DBCCA) or dynamical (RegCM) downscaling methods, based on two meteorological reference datasets (Daymet and Livneh). Subsequently, the downscaled precipitation, temperature, and wind speed data were used to drive two calibrated hydrologic models (VIC and PRMS), with total runoff routed through the Routing Application for Parallel computatIon of Discharge (RAPID) routing model, producing an ensemble of streamflow projections across 2.7 million NHDPlusV2 stream reaches across the CONUS. Each ensemble member covers the 1980-2019 baseline and 2020-2059 near-future periods under the high-end (SSP585) emission scenario. Additionally, using only DBCCA and Daymet, the projections extend to the 2060-2099 far-future period and encompass three additional emission scenarios (SSP370, SSP245, and SSP126). This dataset is designed to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). For further details, refer to Kao et al. (2022), Rastogi et al. (2022), and Ghimire et al. (2023).

13 HYDRO ENERGY↗

CMIP6-based Multi-model Hydroclimate Projection over the Conterminous US, Version 1.1

This dataset presents a suite of high-resolution downscaled hydro-climate projections over the conterminous United States (CONUS) based on multiple selected Global Climate Models (GCMs) from the Coupled Models Intercomparison Project phase 6 (CMIP6). The CMIP6 GCMs are downscaled using either statistical (DBCCA) or dynamical (RegCM) downscaling approaches based on two meteorological reference datasets (Daymet and Livneh). Subsequently, the downscaled precipitation, temperature, and wind speed are employed to drive two calibrated hydrologic models (VIC and PRMS), enabling the simulation of projected future hydrologic responses across the CONUS. Each ensemble member covers the 1980-2019 baseline and 2020-2059 near-future periods under the high-end (SSP585) emission scenario. Moreover, utilizing only DBCCA and Daymet, the projections are further extended to the 2060-2099 far-future period and across three additional emission scenarios (SSP370, SSP245, and SSP126). This dataset is formulated to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). For further details on this dataset, please refer to Kao et al. (2022) and Rastogi et al. (2022).

13 HYDRO ENERGY↗

Dayflow: CONUS Daily Streamflow Reanalysis, Version 2 (DayflowV2)

The DayflowV2 dataset provides multiple meteorologic forcings driven hourly streamflow information for approximately 2.7 million NHDPlusV2 stream reaches in the conterminous US (CONUS). DaymetV4, Stage-IV, and Analysis of Period of Record for Calibration (AORC) forcings and their corresponding hybrids drive a nationally scalable modeling framework integrating the simulated runoff from the Variable Infiltration Capacity (VIC) model with the Routing Application for Parallel computatIon of Discharge (RAPID) routing model. Streamflow with (Assimilated) and without (Naturalized) streamflow assimilation at US Geological Survey (USGS) streamflow monitoring sites are included in DayflowV2. A comprehensive evaluation of streamflow at 7,526 USGS gauges is performed for both streamflow types. The resulting key evaluation metrics are also included in the Dayflow dataset. The reanalysis data are available for variable periods; 36 years (1980-2015) for DaymetV4 (DayflowV1), 18 years (2002-2019) for Stage-IV and its hybrids, and 40 years (1980-2019) for AORC and its hybrids.

13 HYDRO ENERGY↗

Explainable machine learning model for multi-step forecasting of reservoir inflow with uncertainty quantification

We propose an explainable machine learning (ML) model with uncertainty quantification (UQ) to improve multi-step reservoir inflow forecasting. Traditional ML methods have challenges in forecasting inflows multiple days ahead, and lack explainability and UQ. To address these limitations, we introduce an encoder–decoder long short-term memory (ED-LSTM) network for multi-step forecasting, employ the SHapley Additive exPlanation (SHAP) technique for understanding the influence of hydrometeorological factors on inflow prediction, and develop a novel UQ method for prediction trustworthiness. We apply these methods to forecast 7-day inflow in snow-dominant and rain-driven reservoirs. The results demonstrate the effectiveness of the ED-LSTM model, with high forecasting accuracy for short lead times. Our UQ method provides reliable uncertainty estimates, covering 90% of data with a 90% confidence level. The SHAP analysis reveals the importance of historical inflow and precipitation as influential factors. These findings and methods may support reservoir operators in optimizing water resources management decisions.

54 ENVIRONMENTAL SCIENCES↗

CMIP6-based Multi-model Streamflow Projections over the Conterminous US

This dataset presents an ensemble of streamflow projections based on the hydroclimate projections dataset supporting the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). The six-member General Climate Model (GCM) ensemble from the Coupled Models Intercomparison Project phase 6 (CMIP6) downscaled using statistical (i.e., DBCCA) and dynamical (i.e., RegCM) and bias-corrected using two meteorological reference observations (Daymet & Livneh) are driven through two calibrated hydrologic models (VIC & PRMS) to simulate projected future hydrologic responses. This leads to the production of an ensemble of hydroclimate projections, including total runoff (surface runoff and baseflow) for 1980–2019 baseline and 2020–2059 near-term future periods under multiple emission scenarios at 1/24° (~4 km) spatial resolution across the CONUS. The total runoff projections are routed through the Routing Application for Parallel computatIon of Discharge (RAPID) routing model to produce an ensemble of streamflow projections for both periods across 2.7 million NHDPlusV2 stream reaches in the CONUS.

13 HYDRO ENERGY↗

Unraveling the 2021 Central Tennessee flood event using a hierarchical multi-model inundation modeling framework

Flood prediction systems need hierarchical atmospheric, hydrologic, and hydraulic models to predict rainfall, runoff, streamflow, and floodplain inundation. The accuracy of such systems depends on the error propagation through the modeling chain, sensitivity to input data, and choice of models. In this study, we used multiple precipitation forcings (hindcast and forecast) to drive hydrologic and hydrodynamic models to analyze the impacts of various drivers on the estimates of flood inundation depth and extent. We implement this framework to unravel the August 2021 extreme flooding event that occurred in Central Tennessee, USA. We used two radar-based quantitative precipitation estimates (STAGE4 and MRMS) as well as quantitative precipitation forecasts (QPF) from the National Weather Service Weather Prediction Center (WPC) to drive a series of models in the hierarchical framework, including the Variable Infiltration Capacity (VIC) land surface model, the Routing Application for Parallel Computation of Discharge (RAPID) river routing model, and the AutoRoute and TRITON inundation models. An evaluation with observed high-water marks demonstrates that the framework can reasonably simulate flood inundation. Despite the complex error propagation mechanism of the modeling chain, we show that inundation estimates are most sensitive to rainfall estimates. Most notably, QPF significantly underestimates flood magnitudes and inundations leading to unanticipated severe flooding for all stakeholders involved in the event. Finally, we discuss the implications of the hydrodynamic modeling framework for real-time flood forecasting.

54 ENVIRONMENTAL SCIENCES↗

Evaluating Enhanced Reservoir Evaporation Losses From CMIP6‐Based Future Projections in the Contiguous United States

Abstract Enhanced reservoir evaporation has become an emerging concern regarding water loss, especially when compounded with the ever‐increasing water demand. In this study, we evaluated the evaporation rates and losses for 678 major reservoirs (representing nearly 90% of total storage capacity) in the Contiguous United States over historical baseline (1980–2019), near‐term (2020–2039), and mid‐term (2040–2059) future periods. The evaporation rate was estimated using the Lake Evaporation Model (LEM), an advanced lake evaporation model that addresses both heat storage and fetch effects, driven by multi‐ensemble downscaled Coupled Model Intercomparison Projects 6 (CMIP6) projections under the SSP585 emission scenario. The results project that the evaporation loss may increase by 2.5 × 10 7 m 3 /yr through the research period (1980–2059). Among all regions, the Rio Grande is projected to have the largest increasing rate in the near‐term and mid‐term future, with values of 7.11% of 10.25%, respectively. At the seasonal scale, the most significant increase in the evaporation rate is projected during the fall. The evaporation is projected to increase faster than the streamflow over many of the regions in the southwestern US during the summer/fall, suggesting that the shortage of water will be further exacerbated. The climate models contribute the most to the variance, as compared to the other components related to the projection of evaporation losses (e.g., hydrological model, downscaling method, and historical meteorological data set). These findings demonstrate the need to consider accelerated water loss through open water evaporation in long‐term water resources planning across various spatiotemporal scales.

54 ENVIRONMENTAL SCIENCES↗

Insights From Dayflow: A Historical Streamflow Reanalysis Dataset for the Conterminous United States

Abstract Reconstructed historical streamflow time series can supplement limited streamflow gauge observations. However, there are common challenges of typical modeling approaches: process‐based hydrologic models can be data/computation‐intensive, and statistics‐based models can be region/stream‐specific. Here we present a nationally scalable modeling framework integrating the simulated runoff from the Variable Infiltration Capacity (VIC) model with the Routing Application for Parallel computatIon of Discharge (RAPID) routing model leveraging high‐performance computing. We demonstrate an efficient method of assimilating streamflow at US Geological Survey (USGS) streamflow monitoring sites using a simple hierarchical approach in the VIC‐RAPID framework. The result is a reconstructed 36‐year (1980–2015) daily and monthly streamflow dataset (Dayflow) at ∼2.7 million NHDPlusV2 stream reaches in the conterminous US (CONUS). We perform a comprehensive evaluation at 7,526 USGS sites and characterize their error statistics. The results demonstrate that 49% of the USGS sites demonstrate Kling–Gupta Efficiency (KGE) > 0.5 and 58% of the sites show percentage bias within ±20% for the daily naturalized streamflow. Streamflow data assimilation across CONUS shows an overall improvement over naturalized streamflow, notably in the western semiarid‐to‐arid regions. Comparison to other national and global streamflow reanalysis datasets such as the National Water Model and Global Reach‐scale A priori Discharge Estimates for SWOT demonstrates improved KGE, reduced bias, and directions for Dayflow improvements. Investigations of error statistics with key hydrologic, hydroclimatic, and geomorphologic basin characteristics reveal region‐specific patterns which may help improve future framework applications. Overall, Dayflow may enable a better understanding of hydrologic conditions in a changing environment, especially in locations currently not represented by streamflow monitoring networks.

54 ENVIRONMENTAL SCIENCES↗

Impacts of climate change on future hurricane induced rainfall and flooding in a coastal watershed: A case study on Hurricane Harvey

The warming climate is likely to increase hurricane-associated extreme rainfall and lead to sea-level rise (SLR). Thus, how the floods induced by intense hurricanes respond to these potential changes is of great concern. This study investigates the future warmer climate impacts on hurricane-induced extreme rainfall, and—more importantly—the subsequent compound flooding at the watershed scale (from an event-based analysis perspective). To this goal, a modeling framework is designed based on the Distributed Hydrology Soil Vegetation Model (DHSVM), the Two-Dimensional fvand the Regional Community Earth System Model (R-CESM). The framework was applied to Hurricane Harvey (2017) at the Clear Creek watershed (a coastal watershed in the southern Houston) as a case study. The results show that the projected maximum rainfall totals over the watershed would be exacerbated by 17.7 % and 49.7 % in the 2050s and 2090s (respectively) under Representative Concentration Pathway 8.5 (RCP 8.5). This means a 16.1 % increase in Harvey rainfall over the watershed per degree Celsius increase in Mean Surface Temperature over the Gulf of Mexico region (18°~31° N, 77°~98° W). Meanwhile, the increases in maximum inundation extent would be 11.0 % (2050s) and 19.5 % (2090s). Furthermore, considerable increases in maximum inundation depth and duration in regions along the middle and downstream of Clear Creek (and also those around Clear Lake) are expected. The projected SLR will have little effect on the maximum inundation depth and extent if storm surge changes are not taken into account; meanwhile, it will influence the inundation duration at downstream locations. In conclusion, this modeling framework can be also applied at other coastal watersheds to evaluate the projected climate change impacts on the compound flooding induced by extreme climate events.

54 ENVIRONMENTAL SCIENCES↗

Machine Learning Assisted Reservoir Operation Model for Long–Term Water Management Simulation

This study explores strategies for long-term reservoir simulations by combining generic rule-based reservoir management model (RMM) and machine learning (ML) models for two major multipurpose reservoirs — Allatoona Lake and Lake Sidney Lanier in the southeastern United States. First, a standalone RMM is developed to simulate daily release and storage during Water Year 1981–2015. Next, using Long-Short Term Memory (LSTM) as the ML technique, a standalone LSTM model is trained based on reservoir inflow and meteorological observations to simulate reservoir release and estimate reservoir storage through water balance calculation. Three hybrid modeling strategies are developed, one using RMM output as an additional LSTM input (H1), another using LSTM as the initial release estimate in RMM (H2), and the third combining the first two strategies (H3). The Nash–Sutcliffe efficiency (NSE) for release (NSE-r), storage (NSE-s), and their mean (NSE-avg) are used for model evaluation. Overall, H1 improves NSE-r to 0.65 and 0.54 for Allatoona and Lanier, respectively, compared to standalone RMM (0.44 and 0.21); however, its storage trajectory did not produce a physically feasible solution, similar to LSTM. H2 and especially H3 show that they can retain the best features from RMM and LSTM, with H3 NSE-avg being 0.695 and 0.55 for Allatoona and Lanier outperforming RMM (0.615 and 0.29). In conclusion, the findings suggest a robust simulation capacity for large-scale water management in future studies.

54 ENVIRONMENTAL SCIENCES↗

The Third Assessment of the Effects of Climate Change on Federal Hydropower

Understanding the future changes in projected water supplies is a vital objective for federal hydropower facilities tasked with providing low-cost, reliable electricity across a large regional footprint that encompasses a growing customer base, alternative market structures for marketing the electricity, and a more diverse generation asset mix than was historically present when a majority of federal hydropower facilities were built. This study, The Third Assessment of the Effects of Climate Change on Federal Hydropower, directed by Section 9505 of the SECURE Water Act of 2009 (SWA), is the third quinquennial report on evaluating the effects of climate change on hydroelectric energy generated from 132 US federal hydropower plants marketed by four US Department of Energy (DOE) Power Marketing Administrations (PMAs). The technical assessment is conducted by DOE’s Oak Ridge National Laboratory, Pacific Northwest National Laboratory, and Texas A&M University under the guidance of DOE’s Water Power Technologies Office. This study is the result of extensive consultation with the four federal PMAs (Bonneville Power Administration [BPA], Western Area Power Administration [WAPA], Southwestern Power Administration [SWPA], and Southeastern Power Administration [SEPA]), as well as other agencies, including federal hydropower owners/operators (the US Army Corps of Engineers, US Bureau of Reclamation [Reclamation]), US Geological Survey, and National Oceanic and Atmospheric Administration). The main findings of this assessment, along with the PMA administrators’ recommendations, will be included in a subsequent DOE report to Congress. The assessment method and the technical findings are described in this report.

13 HYDRO ENERGY↗

CMIP6-based Multi-model Hydroclimate Projection over the Conterminous US

We present a suite of high-resolution downscaled hydro-climate projections over the conterminous United States (CONUS) based on a six-member General Climate Model (GCM) ensemble from the Coupled Models Intercomparison Project phase 6 (CMIP6). The CMIP6 GCMs are downscaled using two different downscaling approaches (statistical-based DBCCA & dynamical-based RegCM) based on two meteorological reference observations (Daymet & Livneh), and then fed to two calibrated hydrologic models (VIC & PRMS) to simulate projected future hydrologic responses. Each ensemble member covers 1980–2019 in the historic period and 2020–2059 in the near-term future period under the high-end (SSP585) emission scenario. Major variables such as daily maximum temperature (tmax), daily minimum temperature (tmin), daily total precipitation (prcp), daily average wind speed (wind), and daily total runoff (runoff) at 1/24° (~4 km) spatial resolution across the CONUS are provided through this data portal. This dataset is derived to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). Further details of this dataset can be referred to Kao et al. (2022) and Rastogi et al. (2022).

13 HYDRO ENERGY↗

Dayflow: CONUS Daily Streamflow Reanalysis, Version 1 (V1)

Dayflow V1 is a historical streamflow reanalysis dataset reconstructed for a 36-year period (1980-2015). The dataset provides both daily and monthly scale streamflow information at about 2.7 million NHDPlusV2 stream reaches in the conterminous US (CONUS). Dayflow is the result of a nationally scalable modeling framework that integrates the simulated runoff from the Variable Infiltration Capacity (VIC) model with the Routing Application for Parallel computatIon of Discharge (RAPID) routing model. Two types of streamflow products, simulated streamflow with or without assimilation of historic US Geological Survey (USGS) streamflow observations, are provided in Dayflow V1. A comprehensive evaluation at 7,526 USGS National Water Information System (NWIS) gauges is performed for both types of streamflow products. The resulting key evaluation metrics are also included in the Dayflow V1 Dataset.

13 HYDRO ENERGY↗

Evaluating precipitation, streamflow, and inundation forecasting skills during extreme weather events: A case study for an urban watershed

Integrated forecasting systems for precipitation, streamflow, and floodplain inundation are of critical importance in mitigating the impacts of destructive floods caused by extreme weather events. However, the skills of streamflow and floodplain inundation forecasts derived from various Quantitative Precipitation Forecasts (QPF) require a greater level of understanding. In this paper, a set of QPF developed by the National Weather Service (NWS) were used to drive a flood modeling system obtained utilizing offline coupling of a physics-based distributed hydrological model, the Distributed Hydrology Soil and Vegetation Model (DHSVM), and a hydrodynamic model, the Two-dimensional Runoff Inundation Toolkit for Operational Needs (TRITON). This flood modeling system was used to produce forecasts of streamflow and floodplain inundation maps during three major flood events in the Brays Bayou Watershed (Houston, Texas, USA) for a range of QPF durations (6–72 h). Then, to investigate the effects of increasing QPF durations on the forecasts, the forecasting skills of precipitation, streamflow, and floodplain inundation were quantified. The results show that: 1) QPF skills for more intense and sustained events such as hurricanes and tropical storms are higher than for shorter, less intense events; 2) while QPF and streamflow forecasting skills decrease as QPF durations increase, inundation forecasts under longer QPF durations (24 or 72 h) show higher skills; 3) extending the maximum QPF duration in operational hydrologic modeling from 24 h (under normal circumstances) to 72 h (for extreme events) may increase the skills of long lead time forecasts for large-scale events like Hurricane Harvey.

54 ENVIRONMENTAL SCIENCES↗

Hydropower Energy Storage Capacity Dataset

The Hydropower Energy Storage Capacity (HESC) Dataset catalogues estimates of nominal energy storage capacity based on varying levels of detail. Dams and reservoirs selected were selected based on those reported in the National Inventory of Dams (NID 2019) and/or the Global Reservoir and Dam (GRanD v1.3) datasets. These data provide a foundation for understanding available resources at existing hydropower facilities and their potential to provide storage of energy and more flexible generation. Current estimates include Level 1 (based on maximum storage capacities and hydraulic head) and Level 2 (based on historical models or observations of reservoir volume and hydraulic head). For facilities where installed capacity is known, there are also estimates for discharge duration or the length of time when a facility could provide generation at a given capacity. Essential information used to calculate the energy storage capacity and discharge duration (volume, hydraulic head, and details about the sources or records used to obtain those parameters) and summaries of historical generation (for context) are also included.

13 HYDRO ENERGY↗

TRITON: A Multi-GPU open source 2D hydrodynamic flood model

A new open source multi-GPU 2D flood model called TRITON is presented in this work. The model solves the 2D shallow water equations with source terms using a time-explicit first order upwind scheme based on an Augmented Roe's solver that incorporates a careful estimation of bed strengths and a local implicit formulation of friction terms. Here, the scheme is demonstrated to be first order accurate, robust and able to solve for flows under various conditions. TRITON is implemented such that the model effectively utilizes heterogeneous architectures, from single to multiple CPUs and GPUs. Different test cases are shown to illustrate the capabilities and performance of the model, showing promising runtimes for large spatial and temporal scales when leveraging the computer power of GPUs. Under this hardware configuration, communication and input/output subroutines may impact the scalability. The code is developed under an open source license and can be freely downloaded in https://code.ornl.gov/hydro/triton.

2D flood model↗