Engineering topics

Gaal, P. S.

Publications and source records attributed to Gaal, P. S..

4 records

NASA NTRS1974

Graphite thermal expansion reference for high temperature

The design requirements of the aerospace and high-temperature nuclear reactor industries necessitate reliable thermal expansion data for graphite and other carbonaceous materials. The feasibility of an acceptable reference for calibration of expansion measuring systems that operate in carbon-rich atmospheres at temperatures ranging to 2500 C is the prime subject of this work. Present-day graphite technology provides acceptable materials for stable, reproducible references, as reflected by some of the candidate materials. The repeatability for a single specimen in a given expansion measuring system was found to be plus or minus 1%, while the combined results of several tests made on a number of samples fell within a plus or minus 2.5% band.

Gaal, P. S.↗

NASA NTRS1972

Comparative cut-bar thermal conductivity apparatus.

Construction details, error analysis, and typical data for a rapid comparative device for thermal conductivity measurements are presented. The apparatus consists of a comparative cut-bar arrangement contained in a bell-jar. The cylinder shaped specimen is placed between two ARMCO-iron meter bars of the same diameter. The upper bar is equipped with a heater, while the lower one is terminated in a heat sink. The temperature gradient along the bars is measured with a series of copper/constantan microthermocouples, spot welded to them. The assembly is held together by loading the bars to a desired pressure, via a pneumatic cylinder. Contact resistance at the boundaries between the specimen and the meter bars is minimized by using a Hg/In/Ga alloy film at the interface and sufficient loading force. The gradients determined for the meter bars then may be extrapolated to the boundaries yielding the temperature drop along the specimen. Using two different length specimens, the magnitude of the temperature drop across the interface can be computed, or the true gradient along the specimen can be obtained from the difference in overall temperature drops and lengths.

Gaal, P. S.↗

NASA NTRS1969

Quartz pedestal dilatometer.

Automatic recording inverted dilatometer employing fused quartz vertical pedestal and yoke type pushrod

Gaal, P. S.↗

NASA NTRS1968

Measuring thermal expansion of multiple specimens at high temperature

Furnace capable of heating 10 specimens to a uniform temperature simultaneously, aids in the measuring of the thermal expansion of each specimen. The specimens are measured with a telescope unit consisting of two microtelescopes. Overall accuracy of the system is estimated to be plus or minus 2 percent at 2000 degrees C.

Gaal, P. S.↗