Engineering Papers⌕ Search

Engineering topics

Fusaro, R. L.

Publications and source records attributed to Fusaro, R. L..

62 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Lubricating characteristics of polyimide bonded graphite fluoride and polyimide thin films.

A friction and wear life study was conducted on the use of a polyimide (PI) varnish as a binder for the solid lubricant, graphite fluoride (CF sub 1.1) sub n. Also studied were the lubricating properties of PI thin films with no solid lubricant additives. For comparison, similar experiments on PI-bonded MoS2 and burnished films of MoS2 or (CF sub 1.1) sub n were conducted. The best results were obtained with the PI-bonded (CF sub 1.1) sub n films. The polyimide thin films (with no solid lubricant additives) did not lubricate well at 25 C; however, when heated to 100 C, low friction and long wear lives were obtained.

Fusaro, R. L.↗
NASA NTRS1972

Friction and wear life properties of polyimide thin films

A transition in the friction coefficient and wear life properties of Pyralin polyimide (PI) thin films was found to exist at a temperature between 25 deg and 100 deg C. Above this transition, PI thin films gave long wear lives and low friction coefficients. The presence of H2O in air improved the friction and wear life properties at 25 deg C; but at 100 deg C, H2O had a detrimental effect. At 100 deg C and above, a dry argon atmosphere gave lower friction coefficients and longer wear lives than did a dry air atmosphere.

Fusaro, R. L.↗
NASA NTRS1972

Graphite fluoride as a solid lubricant in a polyimide binder

Polyimide resin (PI) was shown to be a suitable binder material for the solid lubricant graphite fluoride, (CF(1.1))n. Comparisons were made to similar tests using PI-bonded MOS2 films, graphite fluoride rubbed films, and MOS2 rubbed films. The results showed that, at any one specific temperature between 25 and 400 C, the wear life of PI-bonded graphite fluoride films exceeded those of the other three films by at least a factor of 2 and by as much as a factor of 60. Minimum friction coefficients for the PI-bonded films were 0.08 for graphite fluoride and 0.04 for MOS2. The rider wear rates for the two PI-bonded films at 25 C were nearly equal.

Fusaro, R. L.↗
NASA NTRS1972

Lubricating characteristics of polyimide bonded graphite fluoride and polyimide thin films

A friction and wear life study was conducted on the use of a polyimide (PI) varnish as a binder for the solid lubricant, graphite fluoride (CF(1.1))N. Also studied were the lubricating properties of PI thin films with no solid lubricant additives. For comparison, similar experiments on PI-bonded MoS2 and burnished films of MoS2 or (CF(li))N were conducted. The best results were obtained with the PI-bonded (CF(1.1))N films. The polyimide thin films (with no solid lubricant additives) did not lubricate well at 25 C; however, when heated to 100 C, low friction and long wear lives were obtained.

Fusaro, R. L.↗
NASA NTRS1969

A new solid lubricant

Friction and wear life studies on burnished films of the compound graphite fluoride have demonstrated its potential as a solid lubricant material. It is effective in moist air, dry air, or in dry argon at temperatures up to approximately 400 degrees C.

Fusaro, R. L.↗