Engineering Papers⌕ Search

Engineering topics

Furno, I

Publications and source records attributed to Furno, I.

Properties of convective cells generated in magnetized toroidal plasmas

Convective cells for turbulence control, generated by means of biased electrodes, are investigated in the simple magnetized toroidal plasmas of TORPEX. A two-dimensional array of 24 electrodes is installed on a metal limiter to test different biasing schemes. This allows influencing significantly both radial and vertical blob velocities. It is shown that these changes agree quantitatively with the flows deduced from the time averaged potential perturbations induced by the biasing. Detailed measurements along and across the magnetic field provide a rather clear picture of the effect of biasing on time averaged profiles. The biased electrodes produce perturbations of the plasma potential and density profiles that are fairly uniform along the magnetic field. Background flows influence the location where potential variations are induced. The magnitude of the achievable potential variations in the plasma is strongly limited by cross-field currents and saturates at large bias voltages once the electrodes draw electron saturation current. A quantitative discussion on the origin of cross-field currents is presented, considering contributions related with diamagnetic drifts, ion inertia, collisions with neutrals, and viscosity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suprathermal ion transport in simple magnetized torus configurations

Inspired by suprathermal ion experiments in the basic plasma experiment TORPEX, the transport of suprathermal ions in ideal interchange mode turbulence is theoretically examined in the simple magnetized torus configuration. We follow ion tracer trajectories as specified by ideal interchange mode turbulence imported from a numerical simulation of drift-reduced Braginskii equations. Using the variance of displacements, {sigma}{sup 2}(t){approx}t{sup {gamma}}, we find that {gamma} depends strongly on suprathermal ion injection energy and the relative magnitude of turbulent fluctuations. The value of {gamma} also changes significantly as a function of time after injection, through three distinguishable phases: ballistic, interaction, and asymmetric. During the interaction phase, we find the remarkable presence of three regimes of dispersion: superdiffusive, diffusive, and subdiffusive, depending on the energy of the suprathermal ions and the amplitude of the turbulent fluctuations. We contrast these results with those from a 'slab' magnetic geometry in which subdiffusion does not occur during the interaction phase. Initial results from TORPEX are consistent with data from a new synthetic diagnostic used to interpret our simulation results. The simplicity of the simple magnetized torus makes the present work of interest to analyses of more complicated contexts ranging from fusion devices to astrophysics and space plasma physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Two-Dimensional Measurements of the Field-Aligned Current Associated with Plasma Blobs

In simple magnetized toroidal plasmas, field-aligned blobs originate from ideal interchange waves and propagate radially outward under the effect of {nabla}B and curvature induced ExB drifts. We report on the first experimental two-dimensional measurements of the field-aligned current associated with blobs, whose ends terminate on a conducting limiter. A dipolar structure of the current density is measured, which originates from {nabla}B and curvature induced polarization of the blob and is consistent with sheath boundary conditions. The dipole is strongly asymmetric due to the nonlinear dependence of the current density at the sheath edge upon the floating potential. Furthermore, we directly demonstrate the existence of two regimes, in which parallel currents to the sheath do or do not significantly damp charge separation and thus blob radial velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Blob motion and control in simple magnetized plasmas

The radial propagation of plasma blobs and possibilities of influencing it are investigated in the TORPEX toroidal experiment [Fasoli et al., Phys. Plasmas 13, 055902 (2006)]. The effect of changing the connection length and the neutral background pressure on blob velocity is measured and trends are found to agree with predictions from a previous study [Theiler et al., Phys. Rev. Lett. 103, 065001, (2009)]. Effects on blob motion due to a change in limiter material and geometry are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Methodology for turbulence code validation: Quantification of simulation-experiment agreement and application to the TORPEX experiment

A methodology for plasma turbulence code validation is discussed, focusing on quantitative assessment of the agreement between experiments and simulations. The present work extends the analysis carried out in a previous paper [P. Ricci et al., Phys. Plasmas 16, 055703 (2009)] where the validation observables were introduced. Here, it is discussed how to quantify the agreement between experiments and simulations with respect to each observable, how to define a metric to evaluate this agreement globally, and - finally - how to assess the quality of a validation procedure. The methodology is then applied to the simulation of the basic plasma physics experiment TORPEX [A. Fasoli et al., Phys. Plasmas 13, 055902 (2006)], considering both two-dimensional and three-dimensional simulation models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Blob-induced toroidal momentum transport in simple magnetized plasmas

The link between toroidal flows and density blobs is experimentally demonstrated in TORPEX simple magnetized plasmas: momentum is transferred from an ideal-interchange mode to density blobs. The phase shift between the toroidal flow and the density perturbations observed in the interchange mode where the blob is born is conserved along the blob radial trajectory. This leads to dipolar structures of the blob-induced flow or to monopolar perturbations, so large that the toroidal flow gets transiently reversed. The turbulent toroidal momentum flux is dominated either by the nonlinear flux or by the convective part but not by the Reynolds stress component.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Practical solutions for reliable triple probe measurements in magnetized plasmas

The triple probe method to obtain local, time-resolved measurements of density, electron temperature and plasma potential is investigated in detail. The difficulties in obtaining reliable measurements with this technique are discussed and overcome. These include phase delay errors, ion sheath expansion and limited bandwidth due to stray capacitance to ground. In particular, a relatively simple electronic circuit is described to strongly reduce stray capacitance. Measurements with the triple probe are presented in a plasma characterized by interchange-driven turbulence in the TORPEX device. The measured time-averaged and time-dependent, conditionally averaged parameters are cross-checked with other Langmuir probe based techniques, and show good agreement. Triple probe measurements show that electron temperature fluctuations are sufficiently large, such that the identification of plasma potential fluctuations with fluctuations of the floating potential is not a good approximation. Over a large radial region, the time-averaged fluctuation-induced particle flux can, however, be deduced from floating potential only. This is because the phase shift between density and electron temperature is close to zero there and temperature fluctuations do not give rise to a net radial particle transport.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Flux Rope Dynamics: Experimental Study of Bouncing and Merging

We show experimentally for the first time that two mutually attracting flux ropes may bounce back instead of merging together, leading to a variety of dynamics not expected from a two-dimensional model. Attraction forces due to flux rope currents compete with repulsion from field line bending of in-plane and out-of-plane magnetic fields and elastic plasma compression. Bouncing dynamics occurs if the line-bending force due to an out-of-plane field dominates. Otherwise, the ropes merge. Further reduction in the field line-bending force results in violently erratic magnetic states.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Imaging of turbulent structures and tomographic reconstruction of TORPEX plasma emissivity

In the TORPEX [A. Fasoli et al., Phys. Plasmas 13, 055902 (2006)], a simple magnetized plasma device, low frequency electrostatic fluctuations associated with interchange waves, are routinely measured by means of extensive sets of Langmuir probes. To complement the electrostatic probe measurements of plasma turbulence and study of plasma structures smaller than the spatial resolution of probes array, a nonperturbative direct imaging system has been developed on TORPEX, including a fast framing Photron-APX-RS camera and an image intensifier unit. From the line-integrated camera images, we compute the poloidal emissivity profile of the plasma by applying a tomographic reconstruction technique using a pixel method and solving an overdetermined set of equations by singular value decomposition. This allows comparing statistical, spectral, and spatial properties of visible light radiation with electrostatic fluctuations. The shape and position of the time-averaged reconstructed plasma emissivity are observed to be similar to those of the ion saturation current profile. In the core plasma, excluding the electron cyclotron and upper hybrid resonant layers, the mean value of the plasma emissivity is observed to vary with (T{sub e}){sup {alpha}}(n{sub e}){sup {beta}}, in which {alpha}=0.25-0.7 and {beta}=0.8-1.4, in agreement with collisional radiative model. The tomographic reconstruction is applied to the fast camera movie acquired with 50 kframes/s rate and 2 {mu}s of exposure time to obtain the temporal evolutions of the emissivity fluctuations. Conditional average sampling is also applied to visualize and measure sizes of structures associated with the interchange mode. The {omega}-time and the two-dimensional k-space Fourier analysis of the reconstructed emissivity fluctuations show the same interchange mode that is detected in the {omega} and k spectra of the ion saturation current fluctuations measured by probes. Small scale turbulent plasma structures can be detected and tracked in the reconstructed emissivity movies with the spatial resolution down to 2 cm, well beyond the spatial resolution of the probe array.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of velocity shear and ion viscosity profile in a magnetohydrodynamic plasma jet

Time-dependent, two-dimensional profiles of the axial flow velocity, density, electron temperature, and magnetic field components are measured at two axial locations in a screw pinch plasma column of the reconnection scaling experiment. The results show that the ion momentum flux for a given column radius is dissipated by the ion-ion Coulomb scattering viscosity due to a significant radial shear of the axial velocity. By comparing the terms of the magnetohydrodynamic momentum balance equation, radial profile of ion viscosity is determined. Chord-integrated ion temperature measurements performed at several radial locations using Doppler broadening spectroscopy show ion temperature of about 1 eV. Measured ion viscosity agrees within a factor of 2 with the classical Braginskii expectations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of a critical pressure gradient for the stabilization of interchange modes in simple magnetized toroidal plasmas

The existence of a critical pressure gradient needed to drive the interchange instability is experimentally demonstrated in the simple magnetized torus TORoidal Plasma EXperiment [A. Fasoli et al., Phys. Plasmas 13, 055902 (2006)]. This gradient is reached during a scan in the neutral gas pressure p{sub n}. Around a critical value for p{sub n}, depending on the magnetic configuration and on the injected rf power, a small increase in the neutral gas pressure triggers a transition in the plasma behavior. The pressure profile is locally flattened, stabilizing the interchange mode observed at lower neutral gas densities. The measured value for the critical gradient is close to the linear theory estimate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cross-Field Motion of Plasma Blobs in an Open Magnetic Field Line Configuration

The radial propagation of blobs generated from plasma instabilities is investigated in an open magnetic field line configuration. Blob cross-field velocities and sizes are obtained from internal probe measurements using pattern recognition. By varying the ion mass, the normalized vertical blob scale a-tilde is scanned from a-tilde<1 to a-tilde>1. An analytical expression for the blob velocity including cross-field ion polarization currents, parallel currents to the sheath, and ion-neutral collisions is derived and shows good quantitative agreement with the experimental data. In agreement with previous theoretical studies, this scaling shows that, for a-tilde<1, the blob velocity is limited by cross-field ion polarization currents, while for a-tilde>1 it is limited by parallel currents to the sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Langmuir probe-based observables for plasma-turbulence code validation and application to the TORPEX basic plasma physics experiment

The methodology for plasma-turbulence code validation is discussed, with focus on the quantities to use for the simulation-experiment comparison, i.e., the validation observables, and application to the TORPEX basic plasma physics experiment [A. Fasoli et al., Phys. Plasmas 13, 055902 (2006)]. The considered validation observables are deduced from Langmuir probe measurements and are ordered into a primacy hierarchy, according to the number of model assumptions and to the combinations of measurements needed to form each of them. The lowest levels of the primacy hierarchy correspond to observables that require the lowest number of model assumptions and measurement combinations, such as the statistical and spectral properties of the ion saturation current time trace, while at the highest levels, quantities such as particle transport are considered. The comparison of the observables at the lowest levels in the hierarchy is more stringent than at the highest levels. Examples of the use of the proposed observables are applied to a specific TORPEX plasma configuration characterized by interchange-driven turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast visible imaging of turbulent plasma in TORPEX

Fast framing cameras constitute an important recent diagnostic development aimed at monitoring light emission from magnetically confined plasmas, and are now commonly used to study turbulence in plasmas. In the TORPEX toroidal device [A. Fasoli et al., Phys. Plasmas 13, 055902 (2006)], low frequency electrostatic fluctuations associated with drift-interchange waves are routinely measured by means of extensive sets of Langmuir probes. A Photron Ultima APX-RS fast framing camera has recently been acquired to complement Langmuir probe measurements, which allows comparing statistical and spectral properties of visible light and electrostatic fluctuations. A direct imaging system has been developed, which allows viewing the light, emitted from microwave-produced plasmas tangentially and perpendicularly to the toroidal direction. The comparison of the probability density function, power spectral density, and autoconditional average of the camera data to those obtained using a multiple head electrostatic probe covering the plasma cross section shows reasonable agreement in the case of perpendicular view and in the plasma region where interchange modes dominate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A three dimensional probe positioner

In order to sort out the physics that is important in many plasma experiments, data in three dimensions (3D) are becoming necessary. Access to the usual cylindrical vacuum vessel is typically restricted to radially or axially insertable probes that can pivot. The space that can be explored usually has significant restrictions either because probe travel must be along a travel path, or a 'wobbly' probe positioner requires one to map between a moveable coordinate system and a preferred laboratory coordinate system. This could for example introduce errors in measurements of vector quantities such as magnetic field or flow. We describe the design and implementation of a 3D probe positioner that slides in two dimensions on a double O-ring seal and radially inserts along the third dimension. The net result is that a 3D space can be explored in a laboratory Cartesian reference frame.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗