Engineering Papers⌕ Search

Engineering topics

Friedrich, Craig R.

Publications and source records attributed to Friedrich, Craig R..

Tuning Li 2 O 2 Formation Routes by Facet Engineering of MnO 2 Cathode Catalysts

In lithium-oxygen batteries, the solubility of LiO 2 intermediates in the electrolyte regulates the formation routes of the Li 2 O 2 discharge product. High-donor-number electrolytes with a high solubility of LiO 2 tend to promote the formation of Li 2 O 2 large particles following the solution route, which eventually benefits the cell capacity and cycle life. Here, we propose that facet engineering of cathode catalysts could be another direction in tuning the formation routes of Li 2 O 2 . In this work, fi-MnO 2 crystals with high occupancies of {111} or {100} facets were adopted as cathode catalysts in Li-O 2 batteries with a tetra(ethylene)glycol dimethyl ether electrolyte. The {111}-dominated beta-MnO 2 catalyzed the formation of the Li 2 O 2 discharge product into large toroids following the solution routes, while {100}-dominated beta-MnO 2 facilitated the formation of Li 2 O 2 thin films through the surface routes. Further computational studies indicate that the different formation routes of Li 2 O 2 could be related to different adsorption energies of LiO 2 on the two facets of beta-MnO 2 . Our results demonstrate that facet engineering of cathode catalysts could be a new way to tune the formation route of Li 2 O 2 in a low-donor-number electrolyte. Here, we anticipate that this new finding would offer more choices for the design of lithium-oxygen batteries with high capacities and ultimately a long cycle life.

25 ENERGY STORAGE↗

Cations controlled growth of β-MnO 2 crystals with tunable facets for electrochemical energy storage

Engineering crystal facets to enhance their functionalities often require complex processing routes to suppress the growth of surfaces with the lowest thermodynamic energies. Herein, we report a unique method to control the morphologies of β-MnO 2 crystals with different occupancy of {100}/{111} facets through the effect of K + cations. Combining aberration-corrected scanning transmission electron microscopy (STEM), ultramicrotomy, and dynamic functional theory (DFT) simulation, we clarified that the β-MnO 2 crystals were formed through a direct solid-state phase transition process. Increasing the concentration of K + cations in the precursor gradually changed the morphology of β-MnO 2 from bipyramid prism ({100}+{111} facets) to an octahedron structure ({111} facets). The K + cations controlled the morphology of β-MnO 2 by affecting the formation of α-K 0.5 Mn 4 O 8 intermediate phase and the subsequent phase transition. Utilizing the β-MnO 2 crystals as the cathode for Li-ion batteries showed that highly exposed {111} facets offered β-MnO 2 crystal better rate performance, with ~70% capacity retention when the charge-discharge rate increased from 20 mA/g to 200 mA/g. Furthermore, our work revealed a new mechanism to tune the morphology of this earth-abundant metal oxide crystal, which could be used to adjust its electrochemical performance for different applications, such as supercapacitors and catalysts for metal-air batteries and fuel cells.

25 ENERGY STORAGE↗

Energy-driven surface evolution in beta-MnO 2 structures

Exposed crystal facets directly affect the electrochemical/catalytic performance of MnO 2 materials during their applications in supercapacitors, rechargeable batteries, and fuel cells. Currently, the facet-controlled synthesis of MnO 2 is facing serious challenges due to the lack of an in-depth understanding of their surface evolution mechanisms. Here, combining aberration-corrected scanning transmission electron microscopy (STEM) and high-resolution TEM, we revealed a mutual energy-driven mechanism between beta-MnO 2 nanowires and microstructures that dominated the evolution of the lateral facets in both structures. The evolution of the lateral surfaces followed the elimination of the {100} facets and increased the occupancy of {110} facets with the increase in hydrothermal retention time. Both self-growth and oriented attachment along their {100} facets were observed as two different ways to reduce the surface energies of the beta-MnO 2 structures. High-density screw dislocations with the 1/2 < 100 > Burgers vector were generated consequently. As a result, the observed surface evolution phenomenon offers guidance for the facet-controlled growth of beta-MnO 2 materials with high performances for its application in metal-air batteries, fuel cells, supercapacitors, etc.

42 ENGINEERING↗

Micromechanical Machining Processes and their Application to Aerospace Structures, Devices and Systems

Micromechanical machining processes are those micro fabrication techniques which directly remove work piece material by either a physical cutting tool or an energy process. These processes are direct and therefore they can help reduce the cost and time for prototype development of micro mechanical components and systems. This is especially true for aerospace applications where size and weight are critical, and reliability and the operating environment are an integral part of the design and development process. The micromechanical machining processes are rapidly being recognized as a complementary set of tools to traditional lithographic processes (such as LIGA) for the fabrication of micromechanical components. Worldwide efforts in the U.S., Germany, and Japan are leading to results which sometimes rival lithography at a fraction of the time and cost. Efforts to develop processes and systems specific to aerospace applications are well underway.

Friedrich, Craig R.↗

Micromanufacturing: Recent developments in this country and abroad

This paper has attempted to summarize some recent activities in this country and overseas. The effort in Louisiana is relatively new and growing. The Russian effort is not well coordinated or documented. A conference on Micro Systems Technologies is scheduled for June of 1993 in St. Petersburg, Russia. Serious consideration should be given to developing a strategy to not only participate in this meeting, but also to spend additional time in Russia assessing the technology. MEMS technologies will eventually affect virtually every aspect of our lives and, at least in the near term, mini-devices with micro-components will probably be the economic drivers for the technology.

Warrington, Robert O.↗

Macro, mini, micro and nano (M(sup 3)N) technologies for the future

Microelectromechanical systems (MEMS), micro systems technologies (MST), and micromanufacturing are relatively recent phrases or acronyms that have become synonymous with the design, development, and manufacture of 'micro' devices and systems. Micromanufacturing encompasses MEMS or MST and, in addition, includes all of the processes involved in the production of micro things. Integration of mechanical and electrical components, including built-in computers, can be formed into systems which must be connected to the macroworld. Macro, mini, micro, and nano technologies are all a part of MEMS or micromanufacturing. At this point in the development of the technology, it is becoming apparent that mini systems, with micro components, could very well be the economic drivers of the technology for the foreseeable future. Initial research in the fabrication of microdevices using IC processing technology took place over thirty years ago. Anisotropic etching of silicon was used to produce piezoresistive diaphragms. Since the early 60's, there has been gradual progress in MEMS until the early 1980's when worldwide interest in the technology really started to develop. During this time high aspect ratio micromachining using x rays was started in Germany. In 1987 the concept of a 'silicon micromechanics foundry' was proposed. Since then the interest in the U.S., Germany, and Japan has increased to the point where hundreds of millions of dollars of research monies are being funneled into the technology (at least in Germany and Japan) and the technology has been classified as critical or as a technology or national importance by the U.S. government.

Friedrich, Craig R.↗