Engineering Papers⌕ Search

Engineering topics

Friedman, Daniel

Publications and source records attributed to Friedman, Daniel.

Two-junction photovoltaic devices

The present disclosure relates to a photovoltaic (PV) device that includes a first junction constructed with a first alloy and having a bandgap between about 1.0 eV and about 1.5 eV, and a second junction constructed with a second alloy and having a bandgap between about 0.9 eV and about 1.3 eV, where the first alloy includes III-V elements, the second alloy includes III-V elements, and the PV device is configured to operate in a thermophotovoltaic system having an operating temperature between about 1500° C. and about 3000° C.

Steiner, Myles Aaron↗

An all optical approach for comprehensive in-operando analysis of radiative and nonradiative recombination processes in GaAs double heterostructures

We demonstrate an all optical approach that can surprisingly offer the possibility of yielding much more information than one would expect, pertinent to the carrier recombination dynamics via both radiative and nonradiative processes when only one dominant deep defect level is present in a semiconductor material. By applying a band-defect state coupling model that explicitly treats the inter-band radiative recombination and Shockley–Read–Hall (SRH) recombination via the deep defect states on an equal footing for any defect center occupation fraction, and analyzing photoluminescence (PL) as a function of excitation density over a wide range of the excitation density (e.g., 5–6 orders in magnitude), in conjunction with Raman measurements of the LO-phonon plasmon (LOPP) coupled mode, nearly all of the key parameters relevant to the recombination processes can be obtained. They include internal quantum efficiency (IQE), minority and majority carrier density, inter-band radiative recombination rate (W r ), minority carrier nonradiative recombination rate (W nr ), defect center occupation fraction (f), defect center density (N t ), and minority and majority carrier capture cross-sections (σ t and σ tM ). While some of this information is thought to be obtainable optically, such as IQE and the W r /W nr ratio, most of the other parameters are generally considered to be attainable only through electrical techniques, such as current-voltage (I-V) characteristics and deep level transient spectroscopy (DLTS). Following a procedure developed herein, this approach has been successfully applied to three GaAs double-heterostructures that exhibit two distinctly different nonradiative recombination characteristics. The method greatly enhances the usefulness of the simple PL technique to an unprecedented level, facilitating comprehensive material and device characterization without the need for any device processing.

14 SOLAR ENERGY↗

Thermal Stability of GaAs Solar Cells for High Temperature Applications

The characteristics of GaAs solar cells after 200 hours of annealing at 400-450 degrees C are reported. The room-temperature reflectivity and external quantum efficiency (EQE) are unchanged after such heat treatments, and peak EQE values of 90% are observed both before and after. At an operating temperature of 400 degrees C, the performance of annealed cells was only slightly worse than cells that had not undergone any annealing; Voc = 0.55 V and FF = 66% were demonstrated for annealed cells tested at 400 degrees C under strong optical injection. These results constitute a promising first step towards photovoltaic applications that demand stable operation at elevated temperatures.

14 SOLAR ENERGY↗

Cooperative Research between NREL and Solar Junction Corp: Cooperative Research and Development Final Report, CRADA Number CRD-08-306

NREL and Solar Junction Corp. will perform cooperative research on materials and devices that are alternatives to standard approaches with the goal of improving solar cell efficiency while lowering cost. The general purpose of this work is to model the performance of a multi-junction concentrator cell of Solar Junction, Inc. design under normal concentrator operating conditions.

14 SOLAR ENERGY↗

DEDALOS NREL (CRADA Final Report)

Currently High Concentration Photovoltaic (HCPV) terrestrial modules are based on the combination of optic elements that concentrate the sunlight into much smaller GaAs space cells to produce electricity. GaAs cell technology has been well developed for space applications during the last two decades, but the use of GaAs cells under concentrated sunlight in terrestrial applications leaves unanswered questions about performance, durability and reliability. The work to be performed under this CRADA will set the basis for the design of high-performance, durable and reliable HCPV terrestrial modules that will bring down electricity production costs in the next five years.

14 SOLAR ENERGY↗

Design of Semiconductor-Based Back Reflectors for High Voc Monolithic Multijunction Solar Cells: Preprint

State-of-the-art multijunction cell designs have the potential for significant improvement before going to higher number of junctions. For example, the Voc can be substantially increased if the photon recycling taking place in the junctions is enhanced. This has already been demonstrated (by Alta Devices) for a GaAs single-junction cell. For this, the loss of re-emitted photons by absorption inthe underlying layers or substrate must be minimized. Selective back surface reflectors are needed for this purpose. In this work, different architectures of semiconductor distributed Bragg reflectors (DBR) are assessed as the appropriate choice for application in monolithic multijunction solar cells. Since the photon re-emission in the photon recycling process is spatially isotropic, the effectof the incident angle on the reflectance spectrum is of central importance. In addition, the DBR structure must be designed taking into account its integration into the monolithic multijunction solar cells, concerning series resistance, growth economics, and other issues. We analyze the tradeoffs in DBR design complexity with all these requirements to determine if such a reflector is suitable toimprove multijunction solar cells.

14 SOLAR ENERGY↗

NASA's Evolution to Ka-Band Space Communications for Near-Earth Spacecraft

This slide presentation reviews the exploration of NASA using a Ka-band system for spacecraft communications in Near-Earth orbits. The reasons for changing to Ka-band are the higher data rates, and the current (X-band spectrum) is becoming crowded. This will require some modification to the current ground station antennas systems. The results of a Request for Information (RFI) are discussed, and the recommended solution is reviewed.

McCarthy, Kevin↗

TJ Solar Cell

This talk will discuss recent developments in III-V multijunction photovoltaic technology which have led to the highest-efficiency solar cells ever demonstrated. The relationship between the materials science of III-V semiconductors and the achievement of record solar cell efficiencies will be emphasized. For instance, epitaxially-grown GAInP has been found to form a spontaneously-ordered GaP/InP (111) superlattice. This ordering affects the band gap of the material, which in turn affects the design of solar cells which incorporate GaInP. For the next generation of ultrahigh-efficiency III-V solar cells, we need a new semiconductor which is lattice-matched to GaAs, has a band gap of 1 eV, and has long minority-carrier diffusion lengths. Out of a number of candidate materials, the recently-discovered alloy GaInNAs appears to have the greatest promise. This material satisfies the first two criteria, but has to date shown very low diffusion lengths, a problem which is our current focus in the development of these next-generation cells.

14 SOLAR ENERGY↗

A Scheme to Improve Throughput for ARQ-Protected Satellite Communication

Automatic-repeat-request (ARQ) error control is often employed to assure high fidelity information transmission. However, ARQ error control can provide poor throughput for satellite multicasting. The throughput in such communication may be improved by the combination of a terrestrial network parallel to the satellite network and a judiciously modified ARQ protocol. In particular, retransmitted ARQ frames can be sent terrestrially in such a hybrid network, allowing higher throughput than in a pure-satellite network. This work presents analytic results to establish the potential for improving the throughput of satellite multicast communication employing ARQ error control by the adoption of such a hybrid network architecture.

Friedman, Daniel↗

Innovative Networking Concepts Tested on the Advanced Communications Technology Satellite

This paper describes a program of experiments conducted over the advanced communications technology satellite (ACTS) and the associated TI-VSAT (very small aperture terminal). The experiments were motivated by the commercial potential of low-cost receive only satellite terminals that can operate in a hybrid network environment, and by the desire to demonstrate frame relay technology over satellite networks. The first experiment tested highly adaptive methods of satellite bandwidth allocation in an integrated voice-data service environment. The second involved comparison of forward error correction (FEC) and automatic repeat request (ARQ) methods of error control for satellite communication with emphasis on the advantage that a hybrid architecture provides, especially in the case of multicasts. Finally, the third experiment demonstrated hybrid access to databases and compared the performance of internetworking protocols for interconnecting local area networks (LANs) via satellite. A custom unit termed frame relay access switch (FRACS) was developed by COMSAT Laboratories for these experiments; the preparation and conduct of these experiments involved a total of 20 people from the University of Maryland, the University of Colorado and COMSAT Laboratories, from late 1992 until 1995.

Friedman, Daniel↗