Engineering topics

Freestone, Kathleen

Publications and source records attributed to Freestone, Kathleen.

3 records

NASA NTRS2007

Imaging Sensor Flight and Test Equipment Software

The Lightning Imaging Sensor (LIS) is one of the components onboard the Tropical Rainfall Measuring Mission (TRMM) satellite, and was designed to detect and locate lightning over the tropics. The LIS flight code was developed to run on a single onboard digital signal processor, and has operated the LIS instrument since 1997 when the TRMM satellite was launched. The software provides controller functions to the LIS Real-Time Event Processor (RTEP) and onboard heaters, collects the lightning event data from the RTEP, compresses and formats the data for downlink to the satellite, collects housekeeping data and formats the data for downlink to the satellite, provides command processing and interface to the spacecraft communications and data bus, and provides watchdog functions for error detection. The Special Test Equipment (STE) software was designed to operate specific test equipment used to support the LIS hardware through development, calibration, qualification, and integration with the TRMM spacecraft. The STE software provides the capability to control instrument activation, commanding (including both data formatting and user interfacing), data collection, decompression, and display and image simulation. The LIS STE code was developed for the DOS operating system in the C programming language. Because of the many unique data formats implemented by the flight instrument, the STE software was required to comprehend the same formats, and translate them for the test operator. The hardware interfaces to the LIS instrument using both commercial and custom computer boards, requiring that the STE code integrate this variety into a working system. In addition, the requirement to provide RTEP test capability dictated the need to provide simulations of background image data with short-duration lightning transients superimposed. This led to the development of unique code used to control the location, intensity, and variation above background for simulated lightning strikes at user-selected locations.

Freestone, Kathleen↗

NASA NTRS2007

Programs for Testing an SSME-Monitoring System

A suite of computer programs has been developed for special test equipment (STE) that is used in verification testing of the Health Management Computer Integrated Rack Assembly (HMCIRA), a ground-based system of analog and digital electronic hardware and software for "flight-like" testing for development of components of an advanced health-management system for the space shuttle main engine (SSME). The STE software enables the STE to simulate the analog input and the data flow of an SSME test firing from start to finish.

Lang, Andre↗

NASA NTRS1998

A Table-Driven Control Method to Meet Continuous, Near-Real-Time Observation Requirements for the Solar X-Ray Imager

The design of the Solar X-Ray Imager (SXI) for the Geostationary Operational Environmental Satellite (GOES) presents an unusual scenario for controlling the observing sequences. The SXI is an operational instrument, designed not primarily for scientific research, but for providing "operational" data used by the National Oceanic and Atmospheric Administration (NOAA) to forecast the near-term space weather. To this end, a sequence of images selected to cover the full dynamic range of the sun will be executed routinely. As the dynamics of the sun have differing temporal cadences, the frequency of various images will differ. These images must be routinely received at the forecast center in near real-time, 24-hours a day, with a minimum of interruptions. While these requirements clearly lead to a 'routine patrol' of images, the parameters for each do not form a static set. The dynamics of the sun will change with the I 1-year solar cycle. The performance of the imaging will vary with on-orbit conditions and time. And while the SXI is not intended as a research instrument, forecasting techniques may change with time, which in turn will further alter the imaging sequences. An additional complication is the highly restricted commanding window, and a very slow commanding rate. To fulfill these requirements, the SXI was designed to utilize a table-driven approach. Sequences are defined using structured loops, with nested repetitions and delays. These sequences reference combinations of imaging parameters which in turn reference tables of parameters than can be loaded by ground commands. Multiple sequences can be built and stored in preparation for execution when determined appropriate by the NOAA forecasters. The result is an approach that can be used to provide a flexible, yet autonomous SXI capable of meeting both arbitrary forecasting requirements, and operating within the commanding constraints.

Wallace, Shawn↗