Engineering topics

Freeland, John W.

Publications and source records attributed to Freeland, John W..

51 records · Page 3

DOE OSTI2021

Reverse-Engineering Strain in Nanocrystallites by Tracking Trimerons

Although strain underpins the behavior of many transition-oxide-based magnetic nanomaterials, it is elusive to quantify. Since the formation of orbital molecules is sensitive to strain, a metal–insulator transition should be a window into nanocrystallite strain. Using three sizes of differently strained Fe 3 O 4 polycrystalline nanorods, the impact of strain on the Verwey transition and the associated formation and dissolution processes of quasiparticle trimerons is tracked. In 40 and 50 nm long nanorods, increasing isotropic strain results in Verwey transitions going from T V ≈ 60 K to 20 K. By contrast, 700 nm long nanorods with uniaxial strain along the (110) direction have T V ≈ 150 K—the highest value reported thus far. A metal–insulator transition, like T V in Fe 3 O 4 , can be used to determine the effective strain within nanocrystallites, thus providing new insights into nanoparticle properties and nanomagnetism.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Proximate Quantum Spin Liquid on Designer Lattice

Complementary to bulk synthesis, here we propose a designer lattice with extremely high magnetic frustration and demonstrate the possible realization of a quantum spin liquid state from both experiments and theoretical calculations. In an ultrathin (111) CoCr 2 O 4 slice composed of three triangular and one kagome cation planes, the absence of a spin ordering or freezing transition is demonstrated down to 0.03 K, in the presence of strong antiferromagnetic correlations in the energy scale of 30 K between Co and Cr sublattices, leading to the frustration factor of similar to 1000. Persisting spin fluctuations are observed at low temperatures via low-energy muon spin relaxation. Our calculations further demonstrate the emergence of highly degenerate magnetic ground states at the 0 K limit, due to the competition among multiply altered exchange interactions. Furthermore, these results collectively indicate the realization of a proximate quantum spin liquid state on the synthetic lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

Giant orbital polarization of Ni 2+ in a square planar environment

Finding large orbital polarization in Ni-based oxides has become a topic of paramount interest in recent years due to the prospect of finding superconductivity. In this study, we investigate the electronic structure of single-crystalline samples of Sr 2 CuO 3 and Ni-doped Sr 2 CuO 3 containing Cu/NiO 4 square planar units. Our polarization-dependent x-ray absorption spectroscopy experiments reveal extremely large orbital polarization (~63%) for Ni 2+ . Cluster calculations and ab initio calculations find that the giant orbital polarization arises due to the low-spin (S=0) configuration with two holes in the Ni 3d x 2 -y 2 orbital, contrary to the expected high-spin (S=1) state from Hund's first rule.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Amorphization mechanism of SrIrO 3 electrocatalyst: How oxygen redox initiates ionic diffusion and structural reorganization

The use of renewable electricity to prepare materials and fuels from abundant molecules offers a tantalizing opportunity to address concerns over energy and materials sustainability. The oxygen evolution reaction (OER) is integral to nearly all material and fuel electrosyntheses. However, very little is known about the structural evolution of the OER electrocatalyst, especially the amorphous layer that forms from the crystalline structure. Here, we investigate the interfacial transformation of the SrIrO 3 OER electrocatalyst. The SrIrO 3 amorphization is initiated by the lattice oxygen redox, a step that allows Sr 2+ to diffuse and O 2− to reorganize the SrIrO 3 structure. This activation turns SrIrO 3 into a highly disordered Ir octahedral network with Ir square-planar motif. The final Sr y IrO x exhibits a greater degree of disorder than IrO x made from other processing methods. Our results demonstrate that the structural reorganization facilitated by coupled ionic diffusions is essential to the disordered structure of the SrIrO 3 electrocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Elucidation of Active Oxygen Sites upon Delithiation of Li 3 IrO 4

Transformational increases in the storage capacity of battery cathodes could be achieved by tapping into the redox activity at oxide ligands in addition to conventional transition metal couples. However, the key signatures that govern such lattice oxygen redox (LOR) have not been ascertained. Li 3 IrO 4 has the largest reversible LOR, rendering it a unique model system. Here, X-ray spectroscopy and computational simulations reveal that LOR in Li 3 IrO 4 is selectively compensated via O sites with three lone pairs, which are activated by Li/Ir disorder. The two-electron LOR can be reversed to regenerate the initial state without unlocking competing bulk reactions observed in many other compounds. We uncover an intricate interplay between stoichiometry, O coordination, and nonbonding states in LOR and pinpoint spectroscopic signatures. This interplay is indispensable for designing materials with 3d metals that fulfill the promise of LOR to overcome the bottlenecks of current cathodes for future implementation in practical batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Hole-Trapping-Induced Stabilization of Ni 4+ in SrNiO 3 /LaFeO 3 Superlattices

Creating new functionality in materials containing transition metals is predicated on our ability to control the associated charge states. For a given metal, forming lower oxidation states is typically easier than generating higher values, and there is an upper limit on valence that is not exceeded under normal conditions. Here we demonstrate that we can exceed the normal upper limit of 3+ for Ni and Fe via synthesis of (SrNiO 3 )m/(LaFeO 3 )n superlattices by tuning n and m. The Goldschmidt tolerance constraints are lifted and SrNi 4+ O 3 with holes on adjacent O anions can be stabilized as a perovskite at the single unit cell level (m = 1). Spectroscopy reveals that the n = 1 superlattice contains Ni 3+ and Fe 4+ , whereas Ni 4+ and Fe 3+ are observed in the n = 5 superlattice. Here, our results show that the B-site cation valences can be tuned by controlling the magnitude of the FeO6 octahedral rotations which in turn drive the energy balance between Ni 3+ /Fe 4+ and Ni 4+ /Fe 3+ , thus controlling emergent electrical properties such as the band alignment and resulting hole confinement. We suggest that this approach may be generally useful for synthesizing novel, metastable layered structures with new functionalities.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Applying Configurational Complexity to the 2D Ruddlesden–Popper Crystal Structure

The layered Ruddlesden–Popper crystal structure can host a broad range of functionally important behaviors. In this work, we establish extraordinary configurational disorder in a layered Ruddlesden–Popper (RP) structure using entropy stabilization assisted synthesis. A protype A 2 CuO 4 RP cuprate oxide with five cations on the A-site sublattice is designed and fabricated into epitaxial single crystal films using pulsed laser deposition. When grown on a near lattice matched substrate, the (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 ) 2 CuO 4 film features a T'-type RP structure with uniform A-site cation mixing and square-planar CuO4 units. These observations are made with a range of combined characterizations using X-ray diffraction, atomic-resolution scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray absorption spectroscopy measurements. It is further found that heteroepitaxial strain plays an important role in crystal phase formation during synthesis. Compressive strain over ~1.5% results in the formation of a non-RP cubic phase consistent with a Cu X 2O 4 spinel structure. The ability to manipulate configurational complexity and move between 2D layered RP and 3D cubic crystal structures in cuprate and related materials promises to enable flexible design strategies for a range of functionalities, such as magnetoresistance, unconventional superconductivity, ferroelectricity, catalysis, and ion transport.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Factors Defining the Intercalation Electrochemistry of CaFe 2 O 4 -Type Manganese Oxides

Oxides with the CaFe 2 O 4 -type structure have been predicted as being suitable hosts for reactions of intercalation of light cations such as Li and Mg because of their favorable cationic diffusion. Although Li has been shown to intercalate into the Mn 2 O 4 variant, the key structure property correlations determining function are not fully ascertained. This basic information is needed before attempting the intercalation of divalent cations, which face comparably higher migration barriers. For this purpose, here the electrode function of CaFe 2 O 4 -type Li 0.8 Mn 2 O 4 was compared for materials made by a direct high-pressure route or through cation exchange from NaMn 2 O 4 . X-ray diffraction and absorption spectroscopy revealed that, despite having largely the same bulk structure, the presence of surface defects blocked Li + transfer in Li 0.8 Mn 2 O 4 made at high pressure. These defects were not present in the cation-exchanged material, which resulted in highly reversible Li intercalation with very fast kinetics in micrometric crystals. Delithiated electrodes from the cation-exchange synthesis were subsequently reduced in an ionic liquid electrolyte containing Mg 2+ . The process induced topotactic changes in the bulk, strongly suggesting the existence of intercalation, but it is accompanied by severe reactivity with the electrolyte that impedes reversibility. This study uncovers that defects affect the fundamentals of cation intercalation in this novel class of materials. The ability of the cation-exchanged material to conduct fast reactions with Li is consistent with calculated activation energy barriers and creates promise for their use as Mg hosts, provided that novel electrolytes enhanced stability at high potential can be realized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Tuning electronic properties in LaNiO 3 thin films by B-site Cu-substitution

Resistors are essential parts of futuristic all-oxide electronic architectures, yet easily overlooked due to their apparent simplicity. In this study, design of thin films with specific resistance spanning six orders of magnitude by partial substitution of Cu 2+ for Ni 3+ in the metallic conductor LaNiO 3 is shown. Substitution is attainable across the whole composition range using atomic layer deposition on LaAlO 3 (100) pc substrates, however with some inclusion of Ruddlesden–Popper RP1 phase (La 2 CuO 4 ) at high levels of Cu-incorporation. The thermal stability of the resistance is based on a metal–insulator transition that evolves from non-existent for LaNiO 3 to above room-temperature for high Cu 2+ substitution. This provides further insight in the metal–insulator transition found for correlated rare-earth nickelates, especially the type of transition seen for ultrathin films of LaNiO 3 that is usually attributed to oxygen vacancy formation. Materials with variable resistivity and metal–insulator-transition temperatures are key in the design of futuristic electronics such as metal–insulator-transition-driven neuromorphic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Probing Mg Intercalation in the Tetragonal Tungsten Bronze Framework V 4 Nb 18 O 55

While commercial Li-ion batteries offer the highest energy densities of current rechargeable battery technologies, their energy storage limit has almost been achieved. Therefore, there is considerable interest in Mg batteries, which could offer increased energy densities in comparison to Li-ion batteries if a high-voltage electrode material, such as a transition-metal oxide, can be developed. However, there are currently very few oxide materials which have demonstrated reversible and efficient Mg 2+ insertion and extraction at high voltages; this is thought to be due to poor Mg 2+ diffusion kinetics within the oxide structural framework. Here, in this paper, the authors provide conclusive evidence of electrochemical insertion of Mg 2+ into the tetragonal tungsten bronze V 4 Nb 18 O 55 , with a maximum reversible electrochemical capacity of 75 mA h g –1 , which corresponds to a magnesiated composition of Mg 4 V 4 Nb 18 O 55 . Experimental electrochemical magnesiation/demagnesiation revealed a large voltage hysteresis with charge/discharge (1.12 V vs Mg/Mg 2+ ); when magnesiation is limited to a composition of Mg 2 V 4 Nb 18 O 55 , this hysteresis can be reduced to only 0.5 V. Hybrid-exchange density functional theory (DFT) calculations suggest that a limited number of Mg sites are accessible via low-energy diffusion pathways, but that larger kinetic barriers need to be overcome to access the entire structure. The reversible Mg 2+ intercalation involved concurrent V and Nb redox activity and changes in crystal structure, as confirmed by an array of complementary methods, including powder X-ray diffraction, X-ray absorption spectroscopy, and energy-dispersive X-ray spectroscopy. Consequently, it can be concluded that the tetragonal tungsten bronzes show promise as intercalation electrode materials for Mg batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Interfacial tuning of chiral magnetic interactions for large topological Hall effects in LaMnO 3 /SrIrO 3 heterostructures

Chiral interactions in magnetic systems can give rise to rich physics manifested, for example, as nontrivial spin textures. The foremost interaction responsible for chiral magnetism is the Dzyaloshinskii-Moriya interaction (DMI), resulting from inversion symmetry breaking in the presence of strong spin-orbit coupling. However, the atomistic origin of DMIs and their relationship to emergent electrodynamic phenomena, such as topological Hall effect (THE), remain unclear. Here, we investigate the role of interfacial DMIs in 3 d –5 d transition metal-oxide-based LaMnO 3 /SrIrO 3 superlattices on THE from a chiral spin texture. By additively engineering the interfacial inversion symmetry with atomic-scale precision, we directly link the competition between interfacial collinear ferromagnetic interactions and DMIs to an enhanced THE. The ability to control the DMI and resulting THE points to a pathway for harnessing interfacial structures to maximize the density of chiral spin textures useful for developing high-density information storage and quantum magnets for quantum information science.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Soft x-ray absorption spectroscopy and magnetic circular dichroism as operando probes of complex oxide electrolyte gate transistors

Electrolyte-based transistors utilizing ionic liquids/gels have been highly successful in the study of charge-density-controlled phenomena, particularly in oxides. Experimental probes beyond transport have played a significant role, despite challenges in their application in electric double-layer transistors. Here, we demonstrate the application of synchrotron soft x-ray absorption spectroscopy (XAS) and x-ray magnetic circular dichroism (XMCD) as operando probes of the charge state and magnetism in ion-gel-gated ferromagnetic perovskite films. Electrochemical response via oxygen vacancies at positive gate bias in LaAlO 3 (001)/La 0.5 Sr 0.5 CoO 3-δ is used as a test case. XAS/XMCD measurements of 4–25 unit-cell-thick films first probe the evolution of hole doping (from the O K-edge pre-peak) and ferromagnetism (at the Co L-edges), to establish a baseline. Operando soft XAS/XMCD of electrolyte-gated films is then demonstrated, using optimized spin-coated gels with a thickness of ~1 μm and a specific composition. The application of gate voltages up to +4 V is shown to dramatically suppress the O K-edge XAS pre-peak intensity and Co L-edge XMCD, thus enabling the Co valence and ferromagnetism to be tracked upon gate-induced reduction. Soft XAS and XMCD, with appropriate electrolyte design, are thus established to be viable for the operando characterization of electrolyte-gated oxides.

Yu, Biqiong↗

DOE OSTI2020

Definition of Redox Centers in Reactions of Lithium Intercalation in Li 3 RuO 4 Polymorphs

Cathodes based on layered LiMO 2 are the limiting components in the path toward Li-ion batteries with energy densities suitable for electric vehicles. Introducing an over-stoichiometry of Li increases storage capacity beyond a conventional mechanism of formal transition metal redox. However, the role and fate of the oxide ligands in such intriguing additional capacity remain unclear. This reactivity was predicted in Li 3 RuO 4 , making it a valuable model system. For this study, a comprehensive analysis of the redox activity of both Ru and O under different electrochemical conditions was carried out, and the effect of Li/Ru ordering was evaluated. Li 3 RuO 4 displays highly reversible Li intercalation to Li 4 RuO 4 below 2.5 V vs Li + /Li 0 , with conventional reactivity through the formal Ru 5+ -Ru 4+ couple. In turn, it can also undergo anodic Li extraction at 3.9 V, which involves O states to a much greater extent than Ru. This reaction competes with side processes such as electrolyte decomposition and, to a much lesser extent, oxygen loss. Although the associated capacity is reversible, reintercalation unlocks a different, conventional pathway also involving the formal Ru 5+ -Ru 4+ couple despite operating above 2.5 V, leading to chemical hysteresis. This new pathway is both chemically and electrochemically reversible in subsequent cycles. This work exemplifies both the challenge of stabilizing highly depleted O states, even with 4d metals, and the ability of solids to access the same redox couple at two very different potential windows depending on the underlying structural changes. It highlights the importance of properly defining the covalency of oxides when defining charge compensation in view of the design of materials with high capacity for Li storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Fundamental Insights from a Single-Crystal Sodium Iridate Battery

Electrochemically driven chemical transformations play the key role in controlling storage of energy in chemical bonds and subsequent conversion to power electric vehicles and consumer electronics. The promise of coupling anionic oxygen redox with cationic redox to achieve a substantial increase in capacities has inspired research in a wide range of electrode materials. A key challenge is that these studies have focused on polycrystalline materials, where it is hard to perform precise structural determinations, especially related to the location of light atoms. Here a different approach is utilized and a highly ordered single crystal, Na 2-x IrO 3 is harnessed, to explore the role of defects and structural transformations in layered transition metal oxide materials on redox-activity, capacity, reversibility, and stability. Within a combined experimental and theoretical framework, it is demonstrated that 1) it is possible to cycle Na 2-x IrO 3 , offering proof of principle for single-crystal based batteries 2) structural phase transitions coincide with Ir 4+ /Ir 5+ redox couple with no evident contribution from anionic redox 3) strong irreversibility and capacity fade observed during cycling correlates with the Na + migration resulting in progressive growth of an electrochemically inert O 3 -type NaIrO 3 phase.

25 ENERGY STORAGE↗

DOE OSTI2020

Organismic materials for beyond von Neumann machines

The elementary basis of intelligence in organisms with a central nervous system includes neurons and synapses and their complex interconnections forming neural circuits. In non-neural organisms such as slime mold with gel-like media, viscosity modulation enables adaptation to changing environments. At a larger scale, collective intelligence emerges via social interactions and feedback in animal colonies. Learning and memory are therefore multi-scale features that evolve as a result of constant interactions with the environment. There is growing interest in emulating such features of intelligence in computing machines and autonomous systems. Materials that can respond to their environment in a manner similar to organisms (referred to as "organismic materials") therefore may be of interest as hardware components in artificial intelligence machines. In this brief review, we present a class of semiconductors called correlated oxides as candidates for learning machines. The term "correlated" refers to the fact that electrons in such lattices strongly interact and the ground state is not what is predicted by classical band theory. Such materials can undergo insulator-metal transitions at near ambient conditions under external stimuli such as thermal or electrical fields, strain, and chemical doping. Depending on the mechanism driving the transition, intermediate states can be metastable with different volatilities, and the time scales of phase change can be controlled over many orders of magnitude. The change in electronic properties can be sharp or gradual, leading to digital or analog behavior. These properties enable the realization of artificial neurons and synapses and emulate the associative and non-associative learning characteristics found in various organisms. We examine microscopic properties concerning electronic and structural transitions leading to collective behavior and theoretical treatments of the ground state and dynamical response, showcasing VO 2 as a model system. Next, we briefly review algorithms designed from the plasticity demonstrated by phase changing systems. Finally, we conclude the brief review with suggestions for future research toward realizing non-von Neumann machines.

42 ENGINEERING↗