Engineering Papers⌕ Search

Engineering topics

Forrest, Stephen R.

Publications and source records attributed to Forrest, Stephen R..

At least 73 records · Page 4

Getting all the Light Out: Eliminating Plasmon Losses in High Efficiency (Final Report)

In this program we demonstrated three cost-effective and practical means for extracting light from an organic light emitting diode (OLED) based lighting fixture. Conventional OLEDs emit only 20% of the light produced in their active regions due to light trapping and losses of the light incident on metal contacts. Our methods for light extraction, that eliminate both of these substantial losses, include placement of a grid-mirror at the substrate side of top-emitting OLEDs, using an ultralow cost diffusing surface at the substrate side of top-emitting OLEDs, and employing high index of refraction sub-electrode microlens arrays (SEMLA). All of these methods result in light emission that is wavelength and viewing angle independent, does not interfere with the OLED structure itself, and is of potentially low cost. By combining the SEMLA solution with substrate outcoupling such as microlens arrays or index matching fluid, up to 70% of the light can be extracted from the OLEDs, thus meeting all of the program objectives. Furthermore, the solutions have been transferred to the industrial sector where efforts at commercialization are underway with the continued involvement of the inventors.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Nozzle geometry for organic vapor jet printing

A first device is provided. The device includes a print head. The print head further includes a first nozzle hermetically sealed to a first source of gas. The first nozzle has an aperture having a smallest dimension of 0.5 to 500 microns in a direction perpendicular to a flow direction of the first nozzle. At a distance from the aperture into the first nozzle that is 5 times the smallest dimension of the aperture of the first nozzle, the smallest dimension perpendicular to the flow direction is at least twice the smallest dimension of the aperture of the first nozzle.

36 MATERIALS SCIENCE↗

Excited state management

Arrangements and techniques for providing organic emissive layers are provided, in which the emissive layer includes a first dopant having a dissociative energy level. A second dopant in the emissive layer provides a solid state sink energy level, to which doubly excited excitons and/or polarons may transition instead of to the dissociative energy level, thereby decreasing the undesirable effects of transitions to the dissociative energy level.

Forrest, Stephen R.↗

Vacuum-Deposited Biternary Organic Photovoltaics

Ternary blend organic photovoltaics (OPVs) have been introduced to improve solar spectral absorption and reduce energy losses beyond that of binary blend OPVs, but the difficulties in simultaneously optimizing the morphology of three molecular components results in devices that have generally exhibited performance inferior to analogous binary OPVs. In this paper, we introduce a small molecule-based bi-ternary OPV comprising two individual, vacuum deposited binary bulk heterojunctions fused at a planar junction without component intermixing. In contrast to previous reports where the open circuit voltage (V OC ) of a conventional, blended ternary cell lies between that of the individual binaries, the V OC of the bi-ternary OPV corresponds to one of the constituent binaries, depending on the order in which they are stacked relative to the anode. Additionally, dipole-induced energy-level realignment between the two binary segments necessary to achieve maximum efficiency is observed only when using donor-acceptor-acceptor’ dipolar donors in the photoactive heterojunctions. The optimized bi-ternary OPV shows improved performance compared to its two constituent binary OPVs, achieving a power conversion efficiency of 10.6 ± 0.3% under AM 1.5G 1 sun (100 mW/cm 2 ) simulated illumination with V OC = 0.94 ± 0.01 V, a short circuit current density of 16.0 ± 0.5 mA cm -2 and a fill factor of 0.70 ± 0.01.

14 SOLAR ENERGY↗

Is there such a thing as a molecular organic alloy?

In inorganic materials, an alloy is a mixture of two or more substances that generally exhibits electronic and/or physical properties that differ from those of its constituents. In organic systems, the formation of a “molecular alloy” comprising mixtures of molecular organic materials has also been proposed. We test the validity of this concept via the study of the optoelectronic properties of a ternary system that has previously been identified to form a molecular acceptor alloy, namely a blend of a poly(3-hexylthiophene) (P3HT) donor, with two acceptors indene-C 60 bisadduct (ICBA) and phenyl-C 61 -butyric acid methyl ester (PC 61 BM) [R. A. Street, et al., J. Am. Chem. Soc., 2013, 135, 986–989]. Using photoelectron spectroscopy, we find that the ICBA:PC 61 BM blend shows the same highest occupied molecular orbital and exciton energies as that of ICBA, indicating the absence of a new exciton state in the blend. Furthermore, charge transfer state spectra of ternary blends are found to comprise a simple linear superposition of the corresponding binaries. From these results, no evidence of new, emergent electronic states is found to support the existence of a molecular alloy in this system. To our knowledge there is as yet no clear evidence of the existence of an alloy in any organic semiconductor system. Finally, we discuss the criteria that should be met by a molecular organic alloy and procedures needed for their unambiguous identification.

36 MATERIALS SCIENCE↗

Intrinsically stable organic solar cells under high-intensity illumination

Organic photovoltaic cells are now approaching commercially viable efficiencies, particularly for applications that make use of their unique potential for flexibility and semitransparency. However, their reliability remains a major concern, as even the most stable devices reported so far degrade within only a few years. This has led to the belief that short operational lifetimes are an intrinsic disadvantage of devices that are fabricated using weakly bonded organic materials—an idea that persists despite the rapid growth and acceptance of organic light-emitting devices, which can achieve lifetimes of several million hours9. Here we study an extremely stable class of thermally evaporated single-junction organic photovoltaic cells. We accelerated the aging process by exposing the packaged cells to white-light illumination intensities of up to 37 Suns. The cells maintained more than 87 percent of their starting efficiency after exposure for more than 68 days. The degradation rate increases superlinearly with intensity, leading to an extrapolated intrinsic lifetime, T 80 , of more than 4.9 × 10 7 hours, where T 80 is the time taken for the power conversion efficiency to decrease to 80 per cent of its initial value. This is equivalent to 27,000 years outdoors. Additionally, we subjected a second group of organic photovoltaic cells to 20 Suns of ultraviolet illumination (centred at 365 nanometres) for 848 hours, a dose that would take 1.7 × 10 4 hours (9.3 years) to accumulate outdoors. No efficiency loss was observed over the duration of the test. Overall, we find that organic solar cells packaged in an inert atmosphere can be extremely stable, which is promising for their future use as a practical energy generation technology.

14 SOLAR ENERGY↗

Engineering Charge-Transfer States for Efficient, Low-Energy-Loss Organic Photovoltaics

Charge transfer (CT) between donors and acceptors following photoexcitation of organic photovoltaics (OPVs) gives rise to bound electron–hole pairs across the donor–acceptor interface, known as CT states. Although these states are essential to charge separation, they are also a source of energy loss. As a result of reduced overlap between electron and hole wavefunctions, CT states are influenced by details of the film morphology and molecular structure. In this work, we describe several important strategies for tuning the energy level and dynamics of the CT state and approaches that can enhance their dissociation efficiency into free charges. Furthermore, we provide an overview of recent physical insights into the key parameters that significantly reduce the Frenkel-to-CT energy offset and recombination energy losses while preserving a high charge-generation yield. Our analysis leads to critical morphological and molecular design strategies for achieving efficient, low-energy-loss OPVs.

14 SOLAR ENERGY↗

Enhanced Light Utilization in Semitransparent Organic Photovoltaics Using an Optical Outcoupling Architecture

Building-integrated photovoltaics employing transparent photovoltaic cells on window panes provides an opportunity to convert solar energy to electricity rather than generating waste heat. In this work, we demonstrate semitransparent organic photovoltaic cells (ST-OPVs) that utilize a non-fullerene acceptor based near-infrared (NIR) absorbing ternary cell combined with a thin, semitransparent, high conductivity Cu-Ag alloy electrode. A combination of optical outcoupling and anti-reflection coatings leads to enhance visible transmission, while reflecting the NIR back into the cell where it is absorbed. This combination of coatings results in doubling of the light utilization efficiency ( LUE ), which is equal to the product of the power conversion efficiency ( PCE ) and the average photopic transparency compared with a conventional semitransparent cell. A maximum LUE = 3.56 ± 0.11% is achieved for a ST-OPV with a PCE = 8.0 ± 0.2% at 1 sun, reference AM1.5G spectrum. Finally, neutral colored ST-OPVs are also demonstrated, with LUE = 2.56 ± 0.2%, along with Commission Internationale d’Eclairage chromaticity coordinates of CIE = (0.337, 0.349) and a color rendering index of CRI = 87.

14 SOLAR ENERGY↗

Tuning Singlet and Triplet Excited State Energies and Frontier Orbitals of Imidazole Host/Emitter for Hybrid White OLEDs

In this work, we report hybrid fluorescent/phosphorescent WOLEDs employing blue fluorescent and green and red phosphorescent emitters doped into a host matrix. The fluorescent emitting dopant harnesses all electrically generated high energy singlet excitons for blue emission, and the phosphorescent dopants harvest the remainder of lower-energy triplet excitons for green and red emission. This design requires the singlet state (S1) of the host to be higher than the S1 of the fluorescent dopant so that the singlet excitons generated on the host are transferred to the fluorescent dopant. Furthermore, the triplet state (T1) of the host matrix should be lower than the T1 of the fluorescent dopant so the triplet excitons generated on the fluorescent dopant can be transferred to the host matrix which will then be transferred to the green and red phosphors. To develop a host material that can serve this purpose, we tune the electronic properties of phenanthro[9,10-d]imidazole by incorporating phenyl and/or pyridyl moieties at the N1 and C2 positions of phenanthro[9,10-d]imidazole. This substitution resulted in variety of host materials with different singlet/triplet energies, quantum efficiency and redox values. The resulting phenanthro[9,10-d]imidazoles are employed as host materials for fluorescent and phosphorescent dopants and as neat fluorescent emitters. Monochromatic devices with a fluorescent emitter and the phenanthro[9,10-d]imidazoles as host materials or as neat fluorescent emitter achieved near theoretical maximum efficiency. Finally, efficient three-color hybrid WOLEDs were fabricated using the phenanthro[9,10-d]imidazoles as hosts for a fluorescent dopant or as neat fluorescent emitters and host for green and red phosphors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Optical and Photophysical Properties of Boron Aza-Dipyridylmethene dyes for Optoelectronics Application

A series of substituted boron aza-dipyridylmethene (aD) compounds are explored for their attractive photophysical and electrochemical properties as fluorescent emitters for blue OLEDs. Previous work in our lab have demonstrated the synthetic ease of dipyridylmethene monomers and their interesting photophysical properties as homoleptic meso-linked dimers. Using Density Functional Theory (DFT) modeling, we combine our theoretical and experimental efforts to synthesize a library of aD compounds by replacing the meso carbon with nitrogen to destabilize the HOMO energy. The synthesized aD derivatives emit blue light with λ max between 400-460 nm and internal quantum efficiencies above 85 % . From TD-DFT calculations, estimation of the singlet and triplet energies that are deduced from fluorescence and phosphorescence emission, respectively, closely matches the experimental data of ΔE ST ≤ 0.4 eV. Aza-dipyridylmethene show promising potential as blue emitting fluorophores in OLEDs with EQE max = 4.5 %, approaching the maximum theoretical limit of fluorescent (fl) OLED of 5.5 %. Boron aza-dipyridylmethene are synthetically tunable compounds which show interesting photophysical properties for applications in organic electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrastrong coupling of vibrationally dressed organic Frenkel excitons with Bloch surface waves in a one-sided all-dielectric structure

We demonstrate a transition from weak, to strong, to ultrastrong coupling of Frenkel molecular excitons and Bloch surface wave photons at room temperature using a one-sided, all-dielectric optical structure. The all-dielectric structure comprises an organic semiconductor thin film on the surface of a distributed Bragg reflector. We investigate the evolution of multiple vibronic polariton branches and their dominant absorption peaks as a function of coupling and in-plane momentum, which is absent in previous ultrastrong coupling systems. Measurements are interpreted using both the transfer matrix method and a coupled-oscillator model without the rotating wave approximation. The dependence of Rabi splitting on the number of excitons and electrical field amplitude is also modeled showing a transition to ultrastrong coupling at film thicknesses ≥ 50 nm. Furthermore, this low-loss polaritonic structure enables us to study phenomena such as organic exciton-polariton dynamics, ultralong range polariton propagation, and high efficiency energy transport in the ultrastrong coupling regime at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Organic photosensitive devices comprising aryl squaraines and methods of making the same

There is disclosed squaraine compounds of formula I: ##STR00001## wherein each of Y.sub.1 and Y.sub.2 is independently chosen from an optionally substituted amino group and an optionally substituted aryl group. Also described are organic optoelectronic devices comprising a Donor-Acceptor heterojunction that is formed from one or more of the squaraine compounds. A method of making the disclosed device, which may include one or more sublimation step for depositing said squaraine compound, is also disclosed.

Thompson, Mark E.↗

Systematic Control of the Orientation of Organic Phosphorescent Pt Complexes in Thin Films for Increased Optical Outcoupling

Abstract Orienting light‐emitting molecules relative to the substrate is an effective method to enhance the optical outcoupling of organic light‐emitting devices. Platinum(II) phosphorescent complexes enable facile control of the molecular alignment due to their planar structures. Here, the orientation of Pt(II) complexes during the growth of emissive layers is controlled by two different methods: modifying the molecular structure and using structural templating. Molecules whose structures are modified by adjusting the diketonate ligand of the Pt complex, dibenzo‐( f , h )quinoxaline Pt dipivaloylmethane, (dbx)Pt(dpm), show an ≈20% increased fraction of horizontally aligned transition dipole moments compared to (dbx)Pt(dpm) doped into a 4,4′‐bis( N ‐carbazolyl)‐1,1′‐biphenyl, CBP, host. Alternatively, a template composed of highly ordered 3,4,9,10‐perylenetetracarboxylic dianhydride monolayers is predeposited to drive the alignment of a subsequently deposited emissive layer comprising (2,3,7,8,12,13,17,18‐octaethyl)‐21H,23H‐porphyrinplatinum(II) doped into triindolotriazine. This results in a 60% increase in horizontally aligned transition dipole moments compared to the film deposited in the absence of the template. The findings provide a systematic route for controlling molecular alignment during layer growth, and ultimately to increase the optical outcoupling in organic light‐emitting diodes.

Kim, Jongchan↗

Organic optoelectronics with electrode buffer layers

There is disclosed an organic optoelectronic device comprising two electrodes in superposed relation comprising an anode and a cathode, at least one donor material and at least one acceptor material located between the two electrodes forming a donor-acceptor heterojunction, an anode buffer layer adjacent to the anode and a cathode buffer layer adjacent to the cathode, and an intermediate layer adjacent to at least one of the anode and cathode buffer layers, wherein when the intermediate layer is adjacent to the anode buffer layer, the intermediate layer is chosen to facilitate the transport of holes to the anode buffer layer, and when the intermediate layer is adjacent to the cathode buffer layer, the intermediate layer is chosen to facilitate the transport of electrons to the cathode buffer layer. Also disclosed are methods of making the same.

36 MATERIALS SCIENCE↗

Organic electroluminescent materials and devices

An organic light emitting device is disclosed whose emissive layer has a host material, a first emissive dopant, and a second dopant. The second dopant is an excited energy state managing dopant provided in an amount between 2-10 vol. % of the emissive layer and has a lowest triplet state energy level, TM, that is higher than a lowest triplet state energy levels, T1, of both the host and the first dopant and lower than the multiply-excited energy level, T*, of the first dopant.

Forrest, Stephen R.↗

Reliable and Large Area Organic Solar Cells on Flexible Foil Substrates (Final Report)

Mature solar technologies are now providing energy in a growing number of locales across the US at costs below that of fossil fuels. In short, solar energy is delivering on its promise of over 60 years as a source of low cost, clean and literally infinite renewable energy. However, basing all solar solutions on existing materials systems, such as silicon, is insufficient. To be impactful, new solutions must enable the ubiquitous presence of solar power generation.

14 SOLAR ENERGY↗