Modeling conditions of radiative heat waves in the Xflows NIF experiment
Explore the source record for details and available documents.
Feinberg, Eli Matthew↗
Engineering topics
Fontes, Christopher John
Publications and source records attributed to Fontes, Christopher John.
FY2024 Q4 L2 Milestone 8237 for Opacity-on-NIF
This document addresses parts 2 and 3 of the original milestone request. In the following writeup, the development of OpSpecTR at LLNL by LLNL and NNSS personnel will be detailed first, followed by a write-up of the development of Vme-resolved simulaVons of the opacity-on-NIF experiment. Capsule backlight simulaVons, hohlraum simulaVons, and sample simulaVons from CASSIO are combined to produce the line of sight from the capsule to an effecVve OpSpec posiVon. Spectra are generated by post-processing these simulaVons from either Spect3D, a commercial software by Prism ComputaVonal Sciences, or FESTR (Finite Element Spectroscopic Transport of RadiaVon), a LANL code. While the simulaVons do not at this stage proceed late enough to include the worst of the backgrounds generated from the hohlraum experimentally and each post-processing simulaVon includes only one ray for each spectrometer channel, these efforts represent proof of concept for a new capability to complete Vme-resolved and Vmegated simulaVons for the complete line of sight of the complex opacity-on-NIF geometry. Future work will be discussed at the end of the report for both efforts.
42 ENGINEERING↗
A spectroscopic analysis code for spatially-resolved X-ray absorption data from the COAX platform
Explore the source record for details and available documents.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Excited states in warm and hot dense matter
Accurate modeling of warm and hot dense matter is challenging in part due to the multitude of excited states that must be considered. Here, we present a variational framework that models these excited states. In this framework an excited state is defined by a set of effective one-electron occupation factors, and the corresponding energy is defined by the effective one-body energy with an exchange and correlation term. Here, the variational framework is applied to an atom-in-plasma model (a generalization of the so-called average atom model). Comparisons with a density functional theory based average atom model generally reveal good agreement in the calculated pressure, but our model also gives access to the excitation energies and charge state distributions.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
XFOL FY25 Omega 3 pager [Slides]
The XFOL campaign is continuing to study radiation flow in stochastic media. Purpose: Simultaneously measure the ionization state of the background and inclusions of a binary stochastic media using the COAX/OUTI diagnostic. Motivation: Radflow is stochastic media is of wide, growing interest and COAX is a new powerful diagnostic that can characterize the radflow physics and validate codes, models, and their underlying assumptions.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
The Effect of the Velocity Distribution on Kilonova Emission
The electromagnetic emission from the nonrelativistic ejecta launched in neutron star mergers (either dynamically or through a disk wind) has the potential to probe both the total mass and composition of this ejecta. These observations are crucial in understanding the role of these mergers in the production of r-process elements in the Universe. However, many properties of the ejecta can alter the light curves and we must both identify which properties play a role in shaping this emission and understand the effects these properties have on the emission before we can use observations to place strong constraints on the amount of r-process elements produced in the merger. This paper focuses on understanding the effect of the velocity distribution (amount of mass moving at different velocities) for lanthanide-rich ejecta on the light curves and spectra. The simulations use distributions guided by recent calculations of disk outflows and compare the velocity-distribution effects to those of ejecta mass, velocity, and composition. Our comparisons show that uncertainties in the velocity distribution can lead to a factor of 2–4 uncertainties in the inferred ejecta mass based on peak infrared luminosities. We also show that early-time UV or optical observations may be able to constrain the velocity distribution, reducing the uncertainty in the ejecta mass.
79 ASTRONOMY AND ASTROPHYSICS↗
The STAG code: A fully relativistic super transition array calculation using Green’s functions
Calculating opacities for a wide range of plasma conditions (i.e. temperature, density, element) requires detailed knowledge of the plasma configuration space and electronic structure. For plasmas composed of heavier elements, relativistic effects are important in both the electronic structure and the details of opacity spectra. We extend our previously described superconfiguration and super transition array capabilities (Gill et al., 2023) to include a fully relativistic formalism. Further, the use of hybrid bound-continuum supershells in our superconfigurations demonstrates the importance of a consistent treatment of bound and continuum electrons in dense plasma opacities, and we expand the discussion of these consequences to include issues associated with equation of state and electron correlations between bound and continuum electrons.
74 ATOMIC AND MOLECULAR PHYSICS↗
Constraining Inputs to Realistic Kilonova Simulations through Comparison to Observed r -process Abundances
Kilonovae, one source of electromagnetic emission associated with neutron star mergers, are powered by the decay of radioactive isotopes in the neutron-rich merger ejecta. Models for kilonova emission consistent with the electromagnetic counterpart to GW170817 predict characteristic abundance patterns, determined by the relative balance of different types of material in the outflow. Assuming that the observed source is prototypical, this inferred abundance pattern in turn must match r -process abundances deduced by other means, such as what is observed in the solar system. We report on analysis comparing the input mass-weighted elemental compositions adopted in our radiative transfer simulations to the mass fractions of elements in the Sun, as a practical prototype for the potentially universal abundance signature from neutron star mergers. We characterize the extent to which our parameter inference results depend on our assumed composition for the dynamical and wind ejecta and examine how the new results compare to previous work. We find that a dynamical ejecta composition calculated using the FRDM2012 nuclear mass and FRLDM fission models with extremely neutron-rich ejecta ($Y_e$ = 0.035) along with moderately neutron-rich ($Y_e$ = 0.27) wind ejecta composition yields a wind-to-dynamical mass ratio of $M_w$/$M_d$ = 0.47, which best matches the observed AT2017gfo kilonova light curves while also producing the bestmatching abundance of neutron capture elements in the solar system, though, allowing for systematics, the ratio may be as high as of order unity.
79 ASTRONOMY AND ASTROPHYSICS↗
Roadmap for the exposé of radiation flows (Xflows) experiment on $\mathrm{NIF}$
Here, the goal of the Xflows experimental campaign is to study the radiation flow on the National Ignition Facility (NIF) reproducing the sensitivity of the temperature (±8 eV, ±23 μm) and density (±11 mg/cc) measurements of the COAX platform. This new platform will enable future astrophysical experiments involving supernova shock breakout, such as Radishock on OMEGA-60, and stochastic media (such as XFOL on OMEGA). Greater energy and larger physical scale on NIF will enable a greater travel distance of radiation flow, higher density, and more manufacturable foams and enable exploration of a greater range of radiation behavior than achievable in the prior OMEGA experiments. This publication will describe the baseline configuration for the Xflows experimental campaign and the roadmap to achieve its primary objectives.
47 OTHER INSTRUMENTATION↗
A superconfiguration calculation of opacity with consistent bound and continuum electron treatments using green’s functions
One of the challenges in calculating the opacity of dense plasmas is the difficulty in consistently modeling electrons bound to nuclei and those that exist within the continuum of free states in electronic structure models. We address this issue by adapting the green's function approach, originally developed for use in average atom calculations, to the determination of superconfiguration (SC) electronic structure. The spectra created using these SCs indicate that a consistent treatment of continuum electronic structure is important for phenomena involving electrons near ionization thresholds, such as the pressure ionization of bound states and the opacity due to transitions near bound-free edges. Though important for dense plasmas, the detailed incorporation of continuum electrons into structure calculations does not have significant impact on the recent discrepancies between the predicted and measured opacity of hot, dense iron (Bailey et al 2015 Nature517 56). Here we find that the inclusion of plasma effects through an ion-sphere model along with our treatment of continuum electronic states gives a description of pressure ionization in hot, dense aluminum that is in better agreement with experiment than methods that rely on perturbative descriptions of the plasma environment (Hoarty et al 2013 Phys. Rev. Lett.110 265003).
74 ATOMIC AND MOLECULAR PHYSICS↗
Detailed temperature diagnostic studies for Radishock and COAX experiments
Spectral diagnostics provide a powerful probe of high energy-density physics experiments. By shining an x-ray source on a target, absorption features can be used to determine accurate temperature profiles of that target material. Many studies produce a single temperature/density measurement by fitting these observed spectra. This paper demonstrates how, by leveraging detailed simulations, we can not only measure the average temperature and density, but the full density and temperature profiles. To do so, we must conduct a careful analysis of the uncertainties in the diagnostic measurement. Here we discuss the characteristics and associated uncertainties of the spectral diagnostic used in the COAX, Radishock and OuTi experiments, ultimately demonstrating how these detailed studies increase the potential of this powerful probe.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Sub-keV design for the National Ignition Facility’s soft x-ray Opacity Spectrometer (OpSpec) and expansion plans for time-resolved measurements
When compared with the National Ignition Facility’s (NIF) original soft x-ray opacity spectrometer, which used a convex cylindrical design, an elliptically shaped design has helped to increase the signal-to-noise ratio and eliminated nearly all reflections from alternate crystal planes. The success of the elliptical geometry in the opacity experiments has driven a new elliptical geometry crystal with a spectral range covering 520–1100 eV. When coupled with the primary elliptical geometry, which spans 1000–2100 eV, the new sub-keV elliptical geometry helps to cover the full iron L-shell and major oxygen transitions important to solar opacity experimentation. The new design has been built and tested by using a Henke x-ray source and shows the desired spectral coverage. Additional plans are underway to expand these opacity measurements into a mode of time-resolved detection, ~1 ns gated, but considerations for the detector size and photometrics mean a crystal geometry redesign. Here, the new low-energy geometry, including preliminary results from the NIF opacity experiments, is presented along with the expansion plans into a time-resolved platform.
47 OTHER INSTRUMENTATION↗
Superconfiguration Calculations Using Green’s Functions [Slides]
Abstract not provided.
97 MATHEMATICS AND COMPUTING↗
Anisotropic angular scattering models of elastic electron-neutral collisions for Monte Carlo plasma simulations
Many laboratory and industrial plasma applications require accurate modeling techniques to understand the interplay between microscopic and macroscopic processes. A prime example of this interplay is how particle and Monte Carlo (MC) simulation codes describe angular scattering of electrons following elastic scattering events. The forward peaked nature of high energy electron elastic scattering is relatively trivial to accurately describe in plasma simulations. However, for lower energy collisions, which produce near isotropic or backward peaked differential cross sections, there is not a strong consensus among the plasma modeling community on how to best describe these angular scattering trends. Here, in this study, we propose a systematic method to approximate the aforementioned non-trivial angular scattering behavior with a formula that can be readily implemented in particle-in-cell (PIC) and/or MC plasma simulation codes. The present approach is specifically applied to fusion relevant atomic hydrogen and helium, as well as for molecular hydrogen, and results are also applicable to the atomic isotopes and homonuclear molecular isotopologues of these species. Comparisons between the present angular distribution function and benchmark scattering data were used to validate the proposed models. In addition, two-term Boltzmann calculations and PIC direct simulation MC simulations revealed that the proposed angular distribution function is accurate, agreeing very well with benchmark convergent close-coupling scattering calculations, and electron transport measurements. These studies confirmed that the present angular distribution function model can be utilized without the need of renormalization to the momentum transfer cross section (as opposed to using the elastic scattering integrated cross section), which has been suggested by several studies in order to correct for deficient angular scattering models, and to agree with transport measurements. Hence, the present anisotropic angular scattering model can be utilized to accurately model the momentum transfer as well as the electron trajectories of elastic collisions.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Introduction to spectral line shape theory
Spectral line-shape models are an important part of understanding high-energy-density (HED) plasmas. Models are needed for calculating opacity of materials and can serve as diagnostics for astrophysical and laboratory plasmas. However, much of the literature on line shapes is directed toward specialists. This perspective makes it difficult for non-specialists to enter the field. We have two broad goals with this topical review. First, we aim to give information so that others in HED physics may better understand the current field. Additionally, this first goal may help guide future experiments to test different aspects of the theory. Second, we provide an introduction for those who might be interested in line-shape theory, and enough materials to be able to navigate the field and the literature. We give a high-level overview of line broadening process, as well as dive into the formalism, available methods, and approximations.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Understanding how minority relativistic electron populations may dominate charge state balance and radiative cooling of a post-thermal quench tokamak plasma
Minority relativistic electron populations can occur in a range of complex plasmas. Of specific interest is when runaway electrons form among the presence of high-atomic-number ion species in a tokamak plasma discharge. It has been recently demonstrated that ion charge state distributions and radiation losses at low bulk electron temperatures can be dominated by relativistic electrons, even though their density is orders of magnitude lower. Furthermore, this was attributed to the relativistic enhancement of electron impact inelastic cross sections. In this work, we provide a closer inspection of the atomic physics underpinning this effect. We also demonstrate the consequences of runaway enhanced scattering on post-disruption tokamak fusion discharges with neon and argon impurities present. Effects on charge state distributions, radiation and spectral characteristics, and reduced-order modeling considerations are discussed.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
All-Order Full-Coulomb Quantum Spectral Line-Shape Calculations
Understanding how atoms interact with hot dense matter is essential for astrophysical and laboratory plasmas. Interactions in high-density plasmas broaden spectral lines, providing a rare window into interactions that govern, for example, radiation transport in stars. However, up to now, spectral line-shape theories employed at least one of three common approximations: second-order Taylor treatment of broadening operator, dipole-only interactions between atom and plasma, and classical treatment of perturbing electrons. In this Letter, we remove all three approximations simultaneously for the first time and test the importance for two applications: neutral hydrogen and highly ionized magnesium and oxygen. Finally, we found 15%–50% change in the spectral line widths, which are sufficient to impact applications including white-dwarf mass determination, stellar-opacity research, and laboratory plasma diagnostics.
79 ASTRONOMY AND ASTROPHYSICS↗
Uncertainties in Kilonova Modeling
Explore the source record for details and available documents.
Fryer, Christopher Lee↗