Engineering topics

Flytzani-Stephanopoulos, Maria

Publications and source records attributed to Flytzani-Stephanopoulos, Maria.

5 records

DOE OSTI2024

Enhancing the Carbon Monoxide Oxidation Performance through Surface Defect Enrichment of Ceria-Based Supports for Platinum Catalyst

Effective synthesis and application of single-atom catalysts on supports lacking enough defects remain a significant challenge in environmental catalysis. Herein, we present a universal defect-enrichment strategy to increase the surface defects of CeO 2 -based supports through H 2 reduction pretreatment. The Pt catalysts supported by defective CeO 2 -based supports, including CeO 2 , CeZrO x , and CeO 2 /Al 2 O 3 (CA), exhibit much higher Pt dispersion and CO oxidation activity upon reduction activation compared to their counterpart catalysts without defect enrichment. Specifically, Pt is present as embedded single atoms on the CA support with enriched surface defects (CA-HD) based on which the highly active catalyst showing embedded Pt clusters (Pt C ) with the bottom layer of Pt atoms substituting the Ce cations in the CeO 2 surface lattice can be obtained through reduction activation. Embedded PtC can better facilitate CO adsorption and promote O 2 activation at Pt C –CeO 2 interfaces, thereby contributing to the superior low-temperature CO oxidation activity of the Pt/CA-HD catalyst after activation.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Design of Dilute Palladium–Indium Alloy Catalysts for the Selective Hydrogenation of CO 2 to Methanol

Adding small amounts of a more reactive dopant metal to a more selective host metal is a well-known strategy for promoting the catalytic reactivity of the latter without sacrificing its selectivity. While substantial attention has been given to coinage metal hosts for activating individual C–H or O–H bonds, less attention has been given to more exotic metals, such as indium, which is highly selective in the complex hydrogenation of CO 2 to methanol. Herein, we describe the synthesis and properties of Pd–In alloys containing Pd in various states of aggregation (isolated atom, small clusters, and extended clusters) assessed through various characterization methods. These materials exhibit unique catalytic behaviors, with Pd promoting both the reaction rate and methanol selectivity in all cases, though its efficacy is highest when Pd is present in small clusters. Here, the inefficiency of high Pd loadings is due in part to losses in Pd accessibility, while the importance of aggregated vs isolated Pd is theorized to result from accelerated H 2 activation. Methods used to synthesize more conventional dilute-limit and single-atom alloy catalysts can, therefore, be extended to non-coinage metal hosts to promote and control more complex chemistries, though the roles of ensemble size may greatly differ.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Highly stable preferential carbon monoxide oxidation by dinuclear heterogeneous catalysts

Atomically dispersed catalysts have been shown highly active for preferential oxidation of carbon monoxide in the presence of excess hydrogen (PROX). However, their stability has been less than ideal. We show here that the introduction of a structural component to minimize diffusion of the active metal center can greatly improve the stability without compromising the activity. Using an Ir dinuclear heterogeneous catalyst (DHC) as a study platform, we identify two types of oxygen species, interfacial and bridge, that work in concert to enable both activity and stability. In conclusion, the work sheds important light on the synergistic effect between the active metal center and the supporting substrate and may find broad applications for the use of atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Pt Atomic Single-Layer Catalyst Embedded in Defect-Enriched Ceria for Efficient CO Oxidation

The local coordination structure of metal sites essentially determines the performance of supported metal catalysts. Here, using a surface defect enrichment strategy, we successfully fabricated Pt atomic single-layer (Pt ASL ) structures with 100% metal dispersion and precisely controlled local coordination environment (embedded vs adsorbed) derived from Pt single-atoms (Pt 1 ) on ceria-alumina supports. The local coordination environment of Pt 1 not only governs its catalytic activity but also determines the Pt 1 structure evolution upon reduction activation. For CO oxidation, the highest turnover frequency can be achieved on the embedded Pt ASL in the CeO 2 lattice, which is 3.5 times of that on the adsorbed Pt ASL on the CeO 2 surface and 10–70 times of that on Pt1. The favorable CO adsorption on embedded Pt ASL and improved activation/reactivity of lattice oxygen within CeO 2 effectively facilitate the CO oxidation. This work provides new insights for the precise control of the local coordination structure of active metal sites for achieving 100% atomic utilization efficiency and optimal intrinsic catalytic activity for targeted reactions simultaneously.

36 MATERIALS SCIENCE↗

NASA NTRS2007

High-Temperature Desulfurization of Heavy Fuel-Derived Reformate Gas Streams for SOFC Applications

Desulfurization of the hot reformate gas produced by catalytic partial oxidation or autothermal reforming of heavy fuels, such as JP-8 and jet fuels, is required prior to using the gas in a solid oxide fuel cell (SOFC). Development of suitable sorbent materials involves the identification of sorbents with favorable sulfidation equilibria, good kinetics, and high structural stability and regenerability at the SOFC operating temperatures (650 to 800 C). Over the last two decades, a major barrier to the development of regenerable desulfurization sorbents has been the gradual loss of sorbent performance in cyclic sulfidation and regeneration at such high temperatures. Mixed oxide compositions based on ceria were examined in this work as regenerable sorbents in simulated reformate gas mixtures and temperatures greater than 650 C. Regeneration was carried out with dilute oxygen streams. We have shown that under oxidative regeneration conditions, high regeneration space velocities (greater than 80,000 h(sup -1)) can be used to suppress sulfate formation and shorten the total time required for sorbent regeneration. A major finding of this work is that the surface of ceria and lanthanan sorbents can be sulfided and regenerated completely, independent of the underlying bulk sorbent. This is due to reversible adsorption of H2S on the surface of these sorbents even at temperatures as high as 800 C. La-rich cerium oxide formulations are excellent for application to regenerative H2S removal from reformate gas streams at 650 to 800 C. These results create new opportunities for compact sorber/regenerator reactor designs to meet the requirements of solid oxide fuel cell systems at any scale.

Flytzani-Stephanopoulos, Maria↗