Engineering Papers⌕ Search

Engineering topics

Fleeter, S.

Publications and source records attributed to Fleeter, S..

25 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Forced response analysis of an aerodynamically detuned supersonic turbomachine rotor

The effect of aerodynamic detuning on the supersonic flow induced forced response behavior of a turbomachine blade row is analyzed using an aeroelastic model. The rotor is modeled as a flat plate airfoil cascade representing an unwrapped rotor annulus; the aerodynamic detuning is achieved by alternating the circumferential spacing of adjacent rotor blades. The total unsteady aerodynamic loading on the blading, due to the convection of the transverse gust past the airfoil cascade as well as that resulting from the motion of the cascade, is developed in terms of influence coefficients. The model developed here is then used to analyze the effect of aerodynamic detuning on the flow induced forced response behavior of a twelve-bladed rotor with Verdon's Cascade B flow geometry.

Hoyniak, D.↗
NASA NTRS1983

The effect of incidence angle on the overall three-dimensional aerodynamic performance of a classical annular airfoil cascade

To be of quantitative value to the designer and analyst, it is necessary to experimentally verify the flow modeling and the numerics inherent in calculation codes being developed to predict the three dimensional flow through turbomachine blade rows. This experimental verification requires that predicted flow fields be correlated with three dimensional data obtained in experiments which model the fundamental phenomena existing in the flow passages of modern turbomachines. The Purdue Annular Cascade Facility was designed specifically to provide these required three dimensional data. The overall three dimensional aerodynamic performance of an instrumented classical airfoil cascade was determined over a range of incidence angle values. This was accomplished utilizing a fully automated exit flow data acquisition and analysis system. The mean wake data, acquired at two downstream axial locations, were analyzed to determine the effect of incidence angle, the three dimensionality of the cascade exit flow field, and the similarity of the wake profiles. The hub, mean, and tip chordwise airfoil surface static pressure distributions determined at each incidence angle are correlated with predictions from the MERIDL and TSONIC computer codes.

Bergsten, D. E.↗
NASA NTRS1983

Aerodynamic performance of an annular classical airfoil cascade

Results are presented for a series of experiments that were performed in a large-scale subsonic annular cascade facility that was specifically designed to provide three-dimensional aerodynamic data for the verification of numerical-calculation codes. In particular, the detailed three-dimensional aerodynamic performance of a classical flat-plate airfoil cascade is determined for angles of incidence of 0, 5, and 10 deg. The resulting data are analyzed and are correlated with predictions obtained from NASA's MERIDL and TSONIC numerical programs. It is found that: (1) at 0 and 5 deg, the airfoil surface data show a good correlation with the predictions; (2) at 10 deg, the data are in fair agreement with the numerical predictions; and (3) the two-dimensional Gaussian similarity relationship is appropriate for the wake velocity profiles in the mid-span region of the airfoil.

Bergsten, D. E.↗
NASA NTRS1983

The coupled aeroelastic response of turbomachinery blading to aerodynamic excitations

An energy balance technique is developed to predict the coupled bending-torsion mode aerodynamically forced response of an airfoil. In this technique, the energy input to the airfoil system per cycle of oscillation is generated by gust forces and moments and, under certain conditions, the self-induced aerodynamic forces and moments. The energy dissipation per cycle is associated with the structural damping, the static moment term for coupled motions, and under certain conditions, the self-induced aerodynamic forces and moments. The effects of the various aerodynamic parameters on the coupled forced response are then considered.In particular, the effects of the inlet Mach number, the interblade phase angle, the level of structural damping, and the cascade geometry on the coupled bending-torsion aerodynamically forced response of a flat plate airfoil cascade are demonstrated.

Hoyniak, D.↗
NASA NTRS1982

The design and instrumentation of the Purdue annular cascade facility with initial data acquisition and analysis

Three dimensional aerodynamic data, required to validate and/or indicate necessary refinements to inviscid and viscous analyses of the flow through turbomachine blade rows, are discussed. Instrumentation and capabilities for pressure measurement, probe insertion and traversing, and flow visualization are reviewed. Advanced measurement techniques including Laser Doppler Anemometers, are considered. Data processing is reviewed. Predictions were correlated with the experimental data. A flow visualization technique using helium filled soap bubbles was demonstrated.

Stauter, R. C.↗