Engineering topics

Ferrari, A. J.

Publications and source records attributed to Ferrari, A. J..

At least 19 records

NASA NTRS1980

Geophysical parameters of the earth-moon system

Doppler tracking data from Lunar Orbiter 4 have been combined with laser ranging data from lunar retroreflectors to yield a number of geophysical and geodetic parameters for the earth and moon. This joint solution gives values of (1) the lunar principal polar moment C/M R squared = 0.3905 plus or minus 0.0023, (2) GM(E) = 398600.461 plus or minus 0.026 cu km/sq s, and (3) an earth/moon mass ratio at 81.300587 plus or minus 0.000049. Also determined are the harmonics of a complete lunar gravity field through degree and order 5, the obliquity of the lunar pole, selenocentric coordinates of the lunar retroreflectors, geocentric coordinates of the McDonald Observatory, and the lunar secular acceleration. The lunar potential Love number is weakly determined at 0.022 plus or minus 0.013, and a suprisingly large dissipation of rotational energy is inferred, though either solid body tidal dissipation or liquid core mantle interactions could be causes.

Ferrari, A. J.↗

NASA NTRS1980

A harmonic analysis of lunar gravity

An improved model of lunar global gravity has been obtained by fitting a sixteenth-degree harmonic series to a combination of Doppler tracking data from Apollo missions 8, 12, 15, and 16, and Lunar Orbiters 1, 2, 3, 4, and 5, and laser ranging data to the lunar surface. To compensate for the irregular selenographic distribution of these data, the solution algorithm has also incorporated a semi-empirical a priori covariance function. Maps of the free-air gravity disturbance and its formal error are presented, as are free-air anomaly and Bouguer anomaly maps. The lunar gravitational variance spectrum has the form V(G; n) = O(n to the -4th power), as do the corresponding terrestrial and martian spectra. The variance spectra of the Bouguer corrections (topography converted to equivalent gravity) for these bodies have the same basic form as the observed gravity; and, in fact, the spectral ratios are nearly constant throughout the observed spectral range for each body. Despite this spectral compatibility, the correlation between gravity and topography is generally quite poor on a global scale.

Bills, B. G.↗

NASA NTRS1980

An analysis of the Seasat Satellite Data Distribution System

A computerized data distribution network for remote accessing of Seasat generated data is described. The service is intended as an experiment to determine user needs and operational abilities for utilizing on-line satellite generated oceanographic data. Synoptic weather observations are input to the U.S. Fleet Numerical Oceanographic Central for preparation and transfer to a PDP 11/60 central computer, from which all access trunks originate. The data available includes meteorological and sea-state information in the form of analyses and forecasts, and users are being monitored for reactions to the system design, data products, system operation, and performance evaluation. The system provides data on sea level and upper atmospheric pressure, sea surface temperature, wind magnitude and direction, significant wave heights, direction, and periods, and spectral wave data. Transmissions have a maximum rate of 1.1 kbit/sec over the telephone line.

Ferrari, A. J.↗

NASA NTRS1979

Planetary geodesy

An attempt is made to review progress in planetary geodesy during the past four years. The discussion is limited to the traditional subjects of geometrical and physical geodesy, with emphasis on gravity, topography, rotation, and their physical significance. The format is kept flexible to accommodate the varied amount of information available for Mercury, Venus, the Moon, Mars, Jupiter, Saturn, Uranus, Neptune, and Pluto.

Ferrari, A. J.↗

NASA NTRS1978

Mars topography harmonics and geophysical implications

The paper describes an improved model of Martian global topography which has been obtained by fitting a sixteenth-degree harmonic series to occultation, radar, spectral, and photogrammetric measurements. Empirical elevation data based on photographic data are used to supplement the observations in areas without data. Values for the mean radius, the mean density, and the displacement of the center of the figure from the center of mass are presented. The reported geometric flattening is too great and the reported dynamic flattening is too small for Mars to be homogeneous and hydrostatic. Maps of the data distribution, global topography, and Bouguer gravity anomaly are interpreted in terms of a crustal thickness map which is consistent with gravity, topography, and recent preliminary Viking seismic results.

Bills, B. G.↗

NASA NTRS1978

The isostatic state of the lunar Apennines and regional surroundings

High-resolution gravity and topography data taken over the Apennine Mountains have been used to compute their isostatic state. Results show that the Apennines are uncompensated; thus this state implies that the lunar crust and upper mantle have been strong enough over 3.9 b.y. to support the load exerted by this topographic excess. The Apennines produce a maximum shear stress of 60 bars at a depth of 60 km. A lower bound on the lunar crustal viscosity of 10 to the 27th power P is calculated on the basis of the assumption of a 10% relaxation over 3.9 b.y. Studies of a broad negative regional anomaly located between Maria Serenitatis and Imbrium necessitate a locally thicker crust to satisfy the observed data. This anomaly may have been produced by a lateral transport of crustal material from beneath the giant impact basins as a result of rebound at the crust-mantle interface.

Ferrari, A. J.↗

NASA NTRS1977

An improved lunar moment of inertia determination - A proposed strategy

A strategy for determining an improved lunar moment of inertia is proposed. An improved uncertainty in the lunar inhomogeneity parameter could reduce the core density error from 4.20 gr/cu cm to 0.1 gm/cu cm for the case of a lunar density model having a 300 km core radius. The current error of 0.0025 for the lunar inhomogeneity parameter is mostly due to the uncertainties in the C20 and C22 gravity harmonics. An optimum reduction strategy for obtaining an order of magnitude improvement in the gravity estimates is based on covariance analyses of Doppler data. The long-arc reduction method is shown to provide better results than the short-arc technique, and the use of an orbit with a 7000 km semimajor axis along with certain terms of up to degree and order eight is recommended.

Ananda, M. P.↗

NASA NTRS1977

Lunar gravity - A harmonic analysis

A sixteenth-degree and sixteenth-order spherical harmonic lunar gravity field has been derived from the long-term Keplerian variations in the orbits of the Apollo subsatellites and Lunar Orbiter 5. This model resolves the major mascon gravity anomalies of the lunar near side and is in very good agreement with line-of-sight acceleration results. The far-side map shows the major ringed basins to be strong localized negative anomalies located in broad regions of positive gravity which correspond closely to the highlands. The rms pressure levels calculated from equivalent-surface height variations show that the moon and earth support nearly equal pressures, whereas Mars is appreciably stronger. The moon appears to support larger loads than earth owing to its weaker central gravity field and perhaps a colder upper lithosphere. Significant differences between the low-degree gravity and topography spectra indicate that the longer-wavelength topographic features are isostatically compensated.

Ferrari, A. J.↗

NASA NTRS1977

Lunar gravity - A long-term Keplerian rate method

Nearside tracking data from Apollo subsatellites and Lunar Orbiter 5 are used to construct a model of the farside lunar gravity field. An indirect method of calculating the average effect of all the gravity anomalies which affect spacecraft orbits is reduced to a linear estimation problem by eliminating the integration of spacecraft dynamics. Doppler frequency shifts between the lunar satellite and earth-based tracking station are used to measure the line of sight velocity component between the orbiter and the tracker; gravity determination is then performed in a weighted least squares estimator which employs the orbital rates as data and formulates the normal equations using the associated Keplerian state. Simulations performed demonstrate that farside gravity features can be economically determined by use of gravity estimates obtained from long-period models of nearside orbiting tracks.

Ferrari, A. J.↗

NASA NTRS1977

A harmonic analysis of lunar topography

A global lunar topographic map has been derived from existing earth-based and orbital observations supplemented in areas without data by a linear autocovariance predictor. Of 2592 bins, each 5 deg square, 1380 (64.7% by area) contain at least one measurement. A spherical harmonic analysis to degree 12 yields a mean radius of 1737.53 plus or minus 0.03 km (formal standard error) and an offset of the center of figure of 1.98 plus or minus 0.06 km toward (19 plus or minus 2) deg S, (194 plus or minus 1) deg E. A Bouguer gravity map, derived from a 12-degree free-air gravity model and the present topography data, is presented for an elevation of 100 km above the mean surface. It is confirmed that the low-degree gravity harmonics are determined primarily by surface height variations and only secondarily by lateral density variations.

Bills, B. G.↗

NASA NTRS1977

A lunar density model consistent with topographic, gravitational, librational, and seismic data

A series of models of the lunar interior are derived from topographic, gravitational, librational, and seismic data. The librational parameters and low-degree gravity harmonics result primarily from surface height variations and only secondarily from lateral density variations. The moon departs from isostasy, even for the low-degree harmonics, with a maximum superisostatic stress of 200 bars under the major mascon basins. The mean crustal thicknesses under different physiographic regions are: mascons, 30-35 km; irregular maria, 50-60 km; and highlands, 90-110 km. A possible composition consistent with our model is an anorthositic crust, underlain by a predominantly forsterite upper mantle which grades into a refractory rich lower mantle surrounding a pyrrhotite core.

Bills, B. G.↗

NASA NTRS1973

Satellite orbit determination

A historic account of the activities of the Satellite OD Group during the MM'71 mission is given along with an assessment of the accuracy of the determined orbit of the Mariner 9 spacecraft. Preflight study results are reviewed, and the major error sources described. Tracking and data fitting strategy actually used in the real time operations is itemized, and Deep Space Network data available for orbit fitting during the mission and the auxiliary information used by the navigation team are described. A detailed orbit fitting history of the first four revolutions of the satellite orbit of Mariner 9 is presented, with emphasis on the convergence problems and the delivered solution for the first orbit trim maneuver. Also included are a solution accuracy summary, the history of the spacecraft orbit osculating elements, the results of verifying the radio solutions with TV imaging data, and a summary of the normal points generated for the relativity experiment.

Jordan, J. F.↗

NASA NTRS1973

Effects of physical librations of the moon on the orbital elements of a lunar satellite.

Physical librations of the moon are small cyclic perturbations with periods of one month and longer, and amplitudes of 100 arc seconds or less. This paper gives data on the magnitude of the physical librations, the geometrical effects on the orbital elements, and the equivalent changes in the coefficients in the gravitational potential. It is shown that geometrical effects can be accommodated either by using an inertial axes system or by compensating for the lunar librations and precession when the selenographic axes are used. Further, it is shown that physical effects are small and negligible for all but the most exacting endeavors.

Ferrari, A. J.↗

NASA NTRS1973

Mars gravity derived from long-period motion of Mariner 9

The spherical harmonic coefficients in the gravity field of Mars are determined using a two stage filtering process. In the first stage, a weighted least squares orbit determination processor is applied to Mariner 9 Doppler tracking data to estimate Kepler elements and rates. In the second stage, the Kepler element rates are used as input to another weighted least squares processor that estimates gravity coefficients using the Lagrange perturbation equations. The novelty in this method is the fitting of element rates rather than the elements themselves. This procedure decouples the results from the effects of internal spacecraft dynamics.

Ferrari, A. J.↗

NASA NTRS1973

Mars gravity derived from the long-period motion of Mariner 9

The spherical harmonic coefficients in the Mars gravity field are determined using a two-stage filtering process. In the first stage, a weighted least-squares orbit determination processor is applied to Mariner 9 radio data to estimate the mean Kepler elements of each orbit. A finite difference method is then used to generate orbital element rates. In the second stage, the gravity coefficients are determined using another weighted least-squares processor which fits the long period Lagrange perturbation equations to the estimated rates. The resulting gravity potential and associated equipotential surface is presented and error sources discussed. Gravity field results are applied to various physical properties of Mars, such as moments of inertia.-

Ferrari, A. J.↗

NASA NTRS1973

Lunar gravity derived from long-period satellite motion - A proposed method.

A new method has been devised to determine the spherical harmonic coefficients of the lunar gravity field. This method consists of a two-step data reduction and estimation process. In the first step, a weighted least-squares empirical orbit determination scheme is applied to Doppler tracking data from lunar orbits to estimate long-period Kepler elements and rates. Each of the Kepler elements is represented by an independent function of time. The long-period perturbing effects of the earth, sun, and solar radiation are explicitly modeled in this scheme. Kepler element variations estimated by this empirical processor are then ascribed to the non-central lunar gravitation features. Doppler data are reduced in this manner for as many orbits as are available. In the second step, the Kepler element rates are used as input to a second least-squares processor that estimates lunar gravity coefficients using the long-period Lagrange perturbation equations.

Ferrari, A. J.↗

NASA NTRS1972

The determination of the satellite orbit of Mariner 9.

This paper presents a comprehensive analysis of the Mars orbital phase of the Mariner 9 trajectory as determined from Earth based radio data. Both the method and accuracy of the orbit determination process are reviewed. Analysis is presented to show the effects of Mars gravity model and node in the plane of the sky errors on the accuracy of orbit determination. In addition the long term evolution of the orbit from insertion to date is presented, and is decomposed into effects from the Mars gravity field, n-body perturbations, and solar radiation pressure. Since the orbit period is nearly commensurable with the Mars rotational period, the orbit experiences significant resonance perturbations. The primary perturbation is in-track with a maximum amplitude of 1000 km and a wavelength of 39 revolutions.

Born, G. H.↗

NASA NTRS1971

Lunar gravity derived from long-period satellite motion, a proposed method

A method was devised to determine the spherical harmonic coefficients of the lunar gravity field. The method consists of a two-step data reduction and estimation process. Pseudo-Doppler data were generated simulating two different lunar orbits. The analysis included the perturbing effects of the L1 lunar gravity field, the earth, the sun, and solar radiation pressure. Orbit determinations were performed on these data and long-period orbital elements were obtained. The Kepler element rates from these solutions were used to recover L1 lunar gravity coefficients. Overall results of the experiment show that lunar gravity coefficients can be accurately determined and that the method is dynamically consistent with long-period perturbation theory.

Ferrari, A. J.↗