Engineering Papers⌕ Search

Engineering topics

Fenter, P

Publications and source records attributed to Fenter, P.

In situ imaging of orthoclase-aqueous solution interfaces with x-ray reflection interface microscopy

The use of x-ray reflection interface microscopy (XRIM) to image molecular-scale topography at the aqueous-solid interface, in situ, is described. Specifically, we image interfacial topography of the orthoclase-(001)-aqueous solution interface at room temperature and describe the challenges associated with in situ XRIM imaging. The measurements show that the reflectivity signal for in situ XRIM measurements is substantially smaller than that for ex situ measurements, because of both intrinsic and extrinsic factors. There is also a systematic temporal reduction in the image intensity with increasing x-ray dose, revealing that interaction of the focused x-ray beam with the orthoclase interfaces leads to interfacial perturbations, presumably in the form of surface roughening. This image fading is localized to the x-ray beam footprint, suggesting that the primary damage mechanism is initiated by photoelectrons produced by x-ray beam absorption near the substrate-electrolyte interface. Finally, the role of aqueous solution composition in controlling the sensitivity of the orthoclase surface to x-ray beam-induced effects is explored. A substantial increase in the orthoclase (001) surface stability was observed in solutions having elevated ionic strength, apparently as a result of the reduced lifetime of radiation chemistry products at these conditions.

36 MATERIALS SCIENCE↗

Comparison of cation adsorption by isostructural rutile and cassiterite.

Macroscopic net proton charging curves for powdered rutile and cassiterite specimens with the (110) crystal face predominant, as a function of pH in RbCl and NaCl solutions, trace SrCl{sub 2} in NaCl, and trace ZnCl{sub 2} in NaCl and Na Triflate solutions, are compared to corresponding molecular-level information obtained from static DFT optimizations and classical MD simulations, as well as synchrotron X-ray methods. The similarities and differences in the macroscopic charging behavior of rutile and cassiterite largely reflect the cation binding modes observed at the molecular level. Cation adsorption is primarily inner-sphere on both isostructural (110) surfaces, despite predictions that outer-sphere binding should predominate on low bulk dielectric constant oxides such as cassiterite ({epsilon}{sub bulk} {approx} 11). Inner-sphere adsorption is also significant for Rb{sup +} and Na{sup +} on neutral surfaces, whereas Cl{sup -} binding is predominately outer-sphere. As negative surface charge increases, relatively more Rb{sup +}, Na{sup +}, and especially Sr{sup 2+} are bound in highly desolvated tetradentate fashion on the rutile (110) surface, largely accounting for enhanced negative charge development relative to cassiterite. Charging curves in the presence of Zn{sup 2+} are very steep but similar for both oxides, reflective of Zn{sup 2+} hydrolysis (and accompanying proton release) during the adsorption process, and the similar binding modes for ZnOH{sup +} on both surfaces. These results suggest that differences in cation adsorption between high and low bulk dielectric constant oxides are more subtly related to the relative degree of cation desolvation accompanying inner-sphere binding (i.e., more tetradentate binding on rutile), rather than distinct inner- and outer-sphere adsorption modes. Cation desolvation may be favored at the rutile (110) surface in part because inner-sphere water molecules are bound further from and less tightly than on the cassiterite (110) surface. Hence, their removal upon inner-sphere cation binding is relatively more favorable.

36 MATERIALS SCIENCE↗

Structure and oxidation state of hematite surfaces reacted with aqueous Fe(II) at acidic and neutral pH

Structural changes and surface oxidation state were examined following the reaction of hematite (0 0 1), (0 1 2), and (1 1 0) with aqueous Fe(II). X-ray reflectivity measurements indicated that Fe(II) induces changes in the structure of all three surfaces under both acidic (pH 3) and neutral (pH 7) conditions. The structural changes were generally independent of pH although the extent of surface transformation varied slightly between acidic and neutral conditions; no systematic trends with pH were observed. Induced changes on the (1 1 0) and (0 1 2) surfaces include the addition or removal of partial surface layers consistent with either growth or dissolution. In contrast, a <1 nm thick, discontinuous film formed on the (0 0 1) surface that appears to be epitaxial yet is not a perfect extension of the underlying hematite lattice, being either structurally defective, compositionally distinct, or nanoscale in size and highly relaxed. Resonant anomalous X-ray reflectivity measurements determined that the surface concentration of Fe(II) present after reaction at pH 7 was below the detection limit of approximately 0.5–1 μmol/m 2 on all surfaces. These observations are consistent with Fe(II) oxidative adsorption, whereby adsorbed Fe(II) is oxidized by structural Fe(III) in the hematite lattice, with the extent of this reaction controlled by surface structure at the atomic scale. The observed surface transformations at pH 3 show that Fe(II) oxidatively adsorbs on hematite surfaces at pH values where little net adsorption occurs, based on historical macroscopic Fe(II) adsorption behavior on fine-grained hematite powders. This suggests that Fe(II) plays a catalytic role, in which an electron from an adsorbed Fe(II) migrates to and reduces a lattice Fe(III) cation elsewhere, which subsequently desorbs in a scenario with zero net reduction and zero net adsorption. Finally, given the general pH-independence and substantial mass transfer involved, this electron and atom exchange process appears to be a significant subsystem within macroscopic pH-dependent Fe(II) adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A direct-method for imaging elemental distribution profiles with long-period x-ray standing waves.

A model-independent Fourier-inversion method for imaging elemental profiles from multilayer and total-external reflection x-ray standing wave (XSW) data is developed for the purpose of understanding the assembly of atoms, ions, and molecules at well-defined interfaces in complex environments. The direct-method formalism is derived for the case of a long-period XSW generated by low-angle specular reflection in an attenuating overlayer medium. It is validated through comparison with simulated and experimental data to directly obtain an elemental distribution contained within the overlayer. We demonstrate this formalism by extracting the one-dimensional profile of Ti normal to the surface for a TiO{sub 2}/Si/Mo trilayer deposited on a Si substrate using the Ti K{alpha} fluorescence yield measured in air and under an aqueous electrolyte. The model-independent results demonstrate reduced coherent fractions for the in situ results associated with an incoherency of the x-ray beam (which are attributed to fluorescence excitation by diffusely or incoherently scattered x-rays). The uniqueness and limitations of the approach are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing interfacial reactions with x-ray reflectivity and x-ray reflection interface microscopy : influence of NaCl on the dissolution of orthoclase at pOH2 and 85 {degree} C.

The role of electrolyte ions in the dissolution of orthoclase (0 0 1) in 0.01 m NaOH (pOH {approx} 2) at 84 {+-} 1 C is studied using a combination of in-situ X-ray reflectivity (XR) and ex-situ X-ray reflection interface microscopy (XRIM). The real-time XR measurements show characteristic intensity oscillations as a function of time indicative of the successive removal of individual layers. The dissolution rate in 0.01 m NaOH increases approximately linearly with increasing NaCl concentration up to 2 m NaCl. XRIM measurements of the lateral interfacial topography/structure were made for unreacted surfaces and those reacted in 0.01 m NaOH/1.0 m NaCl solution for 15, 30 and 58 min. The XRIM images reveal that the dissolution reaction leads to the formation of micron-scale regions that are characterized by intrinsically lower reflectivity than the unreacted regions, and appears to be nucleated at steps and defect sites. The reflectivity signal from these reacted regions in the presence of NaCl in solution is significantly lower than that calculated from an idealized layer-by-layer dissolution process, as observed previously in 0.1 m NaOH in the absence of added electrolyte. This difference suggests that dissolved NaCl results in a higher terrace reactivity leading to a more three-dimensional process, consistent with the real-time XR measurements. These observations demonstrate the feasibility of XRIM to gain new insights into processes that control interfacial reactivity, specifically the role of electrolytes in feldspar dissolution at alkaline conditions.

58 GEOSCIENCES↗

Rb{sup +} and Sr{sup 2+} adsorption at the TiO{sub 2}(110) - electrolyte Interface observed with resonant anomalous x-ray reflectivity.

We report the vertical density profiles of Rb{sup +} and Sr{sup 2+} at the rutile TiO{sub 2}(110)-electrolyte interface for the following bulk electrolyte conditions, [Rb{sup +}] = 1 mM at pH 11 and [Sr{sup 2+}] = 0.1 mM at pH 10.3, using X-ray reflectivity and resonant anomalous X-ray reflectivity. We find that Rb{sup +} specifically adsorbs with a coverage of 0.080 {+-} 0.003 monolayer (ML) and a height of 3.72 {+-} 0.03 {angstrom} above the surface Ti-O plane. In comparison, Sr{sup 2+} adsorbs with a coverage of 0.40 {+-} 0.07 ML and an average height of 3.05 {+-} 0.16 {angstrom}, but with a significant vertical distribution width (0.35 {+-} 0.02 {angstrom}). The Sr{sup 2+} distribution in the presence of a background electrolyte ([Na{sup +}] = 30 mM) was also investigated, and it is found that, while the ion height and coverage are unchanged within the uncertainties of the measurements, the width of the distribution is apparently increased in the presence of Na{sup +}. Comparison is made with previous results, including XR and X-ray standing waves (XSW) measurements, and molecular dynamics simulations. Our results are in excellent agreement with a recently proposed multisite adsorption mechanism that suggests simultaneous adsorption in two inner-sphere adsorption geometries, the tetradentate and the bidentate sites.

36 MATERIALS SCIENCE↗

Environmental research at the Advanced Photon Source.

Because of the importance of probing molecular-scale chemical and physical structure of environmental samples in their natural and often hydrated state, synchrotron radiation has been a powerful tool for environmental scientists for decades. Thus, the crucial role that a highly coherent and high-brightness hard X-ray source such as the Advance Photon Source (APS) can play in addressing many of the outstanding questions in molecular environmental science (MES) was recognized even before 'first light' at the facility. No single synchrotron-based technique or experimental approach can adequately address the tremendous temporal and spatial heterogeneities of the chemistry, physics, and biology of natural environmental samples. Thus, it is common at the APS that multiple X-ray techniques and experimental systems are employed to investigate environmental samples, often chosen for their ability to focus on solute species, plants, microbes, organics, interfacial species, or solids.

43 PARTICLE ACCELERATORS↗