Engineering Papers⌕ Search

Engineering topics

Feng, Zhe

Publications and source records attributed to Feng, Zhe.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Observed and Projected Changes of Large‐Scale Environments Conducive to Spring MCS Initiation Over the US Great Plains

Abstract Mesoscale convective systems (MCSs) are frequent over the US Great Plains during spring. The link between large‐scale environments and spring MCS initiation were well established. Here, historical and future changes of spring large‐scale environments favorable for MCS initiation are investigated using an MCS tracking data set, ERA5 reanalysis, and 20 Coupled Model Intercomparison Project Phase 6 (CMIP6) models. The frequency of Great Plains low‐level jet (GPLLJ)‐related MCS environments is found to have increased by ∼41% from 1979 to 2019, consistent with the enhanced GPLLJ and more frequent MCSs. Comparing CMIP6 AMIP and historical experiments, we find that the observed GPLLJ strengthening and more frequent MCS environments are mainly due to the decadal sea‐surface temperature variations rather than external forcings. Under a high emission scenario, the frequency of GPLLJ‐related environments favorable for MCS initiation will increase by ∼65% during 2015–2100, along with a stronger GPLLJ, suggesting more frequent MCSs over the US Great Plains in a warming world.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Contrasting Responses of Hailstorms to Anthropogenic Climate Change in Different Synoptic Weather Systems

Hailstones and extreme precipitation generate substantial economic losses across the United States (US) and the globe. Their strong association with short-lived, intense convective storms poses a great challenge in predicting their future changes. Here, we conducted model simulations at 1.2 km grid spacing for severe convective storms with large hail and heavy precipitation that occurred in two typical types of synoptic-scale environments in spring seasons over the central US under both current and future climate conditions. We find that the responses of large hail (diameters >2.5 cm) to anthropogenic climate change (ACC) are markedly different between the hailstorms developed in the two types of synoptic-scale environments, with over 110% increase in large hail occurrences for the frontal systems, whereas less than 30% increase for the Great Plains low-level jet (GPLLJ) systems. This is explained by the larger increase in convective intensity and updraft width and a smaller increase in warm cloud depth in the frontal storms compared with the GPLLJ storms. Interestingly, the occurrences and intensity of heavy precipitation (rain rate >20 mm hr-1) in both types of systems are similarly sensitive to ACC (e.g., 40% and 33% increases in the occurrences for the frontal and GPLLJ systems, respectively). These results advance our knowledge of hail projection and have important implications for managing risks for future hail.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A Machine‐Learning‐Assisted Stochastic Cloud Population Model as a Parameterization of Cumulus Convection

Abstract A machine‐learning‐assisted stochastic cloud population model is coupled with the Advanced Research Weather Research and Forecasting (WRF) model to represent fluctuations in the cloud‐base mass flux associated with the life cycles and interactions among cumulus convection cells. In this cloud population model, the size distribution and the associated cloud‐base mass flux of the convective cells are related to their previous state and to the change in the total convective area via a transition function. The convective area tendency in turn is assumed to depend on the cloud‐base mass flux that is resolved by the host WRF model. The transition function is represented by a single hidden‐layer neural network trained by the evolution of convective cell size distributions in a 1‐km grid‐spacing WRF simulation run over the Australian Monsoon region. At every grid point of the host model, the cloud population model predicts the cell size and cloud‐base mass flux distributions from which a random sample of cells is fed to an entraining parcel model that calculates precipitation as well as the associated liquid water potential temperature and total moisture tendencies. These tendencies are averaged over the cells and provided to the host model. Several regional simulations are performed over tropical and midlatitude domains to test this as a potential approach to scale‐aware parameterization. It is shown that such an approach could be a new promising path to simulating realistic precipitation statistics and propagation of precipitation associated with the Madden‐Julian Oscillation while maintaining realistic depictions of the diurnal cycle over both land and ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Exploratory Precipitation Metrics: Spatiotemporal Characteristics, Process-Oriented, and Phenomena-Based

Abstract Precipitation sustains life and supports human activities, making its prediction one of the most societally relevant challenges in weather and climate modeling. Limitations in modeling precipitation underscore the need for diagnostics and metrics to evaluate precipitation in simulations and predictions. While routine use of basic metrics is important for documenting model skill, more sophisticated diagnostics and metrics aimed at connecting model biases to their sources and revealing precipitation characteristics relevant to how model precipitation is used are critical for improving models and their uses. This paper illustrates examples of exploratory diagnostics and metrics including 1) spatiotemporal characteristics metrics such as diurnal variability, probability of extremes, duration of dry spells, spectral characteristics, and spatiotemporal coherence of precipitation; 2) process-oriented metrics based on the rainfall–moisture coupling and temperature–water vapor environments of precipitation; and 3) phenomena-based metrics focusing on precipitation associated with weather phenomena including low pressure systems, mesoscale convective systems, frontal systems, and atmospheric rivers. Together, these diagnostics and metrics delineate the multifaceted and multiscale nature of precipitation, its relations with the environments, and its generation mechanisms. The metrics are applied to historical simulations from phases 5 and 6 of the Coupled Model Intercomparison Project. Models exhibit diverse skill as measured by the suite of metrics, with very few models consistently ranked as top or bottom performers compared to other models in multiple metrics. Analysis of model skill across metrics and models suggests possible relationships among subsets of metrics, motivating the need for more systematic analysis to understand model biases for informing model development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Deep Convection Initiation, Growth, and Environments in the Complex Terrain of Central Argentina during CACTI

This study characterizes the wide range of deep convective cloud life cycles and their relationships with ambient environments observed during the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign near the Sierras de Córdoba (SDC) range in central Argentina. We develop a novel convective cell tracking database for the entire field campaign using C-band polarimetric radar observations. The cell tracking database includes timing, location, area, depth, merge/split information, microphysical properties, collocated satellite-retrieved cloud properties, and sounding-derived environmental conditions. Results show that the SDC exerts a strong control on convection initiation (CI) and growth. CI preferentially occurs east of the SDC ridge during the afternoon, and cells often undergo upscale growth through the evening as they travel eastward toward the plains. Larger and more intense cells tend to occur in more unstable and humid low-level environments, and surface-based cells are stronger than elevated cells. Midtropospheric relative humidity and vertical wind shear also jointly affect the size and depth of the cells. Rapid cell area growth rates exhibit dependence on both large environmental wind shear and low-level moisture. Evolution of convective cell macro- and microphysical properties are strongly influenced by convective available potential energy and low-level humidity, as well as the presence of other cells in their vicinity. This cell tracking database demonstrates a framework that ties measurements from various platforms centering around convective life cycles to facilitate process understanding of factors that control convective evolution.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Impacts of Large-Scale Urbanization and Irrigation on Summer Precipitation in the Mid-Atlantic Region of the United States

This study investigates how urbanization and irrigation in the United States east of the Rocky Mountains affect summer precipitation in the Mid-Atlantic region (MAR) using convection-permitting Weather Research and Forecasting model simulations with/without urbanization or irrigation. In this work, a feature tracking algorithm is used to identify precipitation from mesoscale convective systems (MCSs), isolated deep convection (IDC), and non-convective systems (NC). Overall, urbanization suppresses all three types of precipitation in the MAR by reducing water vapor content and convective available potential energy, while irrigation enhances IDC and NC precipitation but suppresses MCS precipitation. Examination of the MCS and IDC initiation locations indicates that irrigation suppresses MAR precipitation that is produced by MCSs initiated in the Great Plains and Midwest (GP) but enhances MAR precipitation from MCSs initiated locally within the region. Irrigation induces a mid-level cyclonic circulation anomaly centering in the Southeast, hindering the eastward propagation and development of MCSs from the GP.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Precipitation–Moisture Coupling Over Tropical Oceans: Sequential Roles of Shallow, Deep, and Mesoscale Convective Systems

We report Precipitation over tropical oceans rapidly increases when the environmental column saturation fraction (CSF) increases past a critical value of ~0.7. Past studies suggested that increased stratiform rainfall greatly contributes to the rapid rainfall enhancement. In this study, the sequential roles of non-deep convection, deep convection, and mesoscale convective system (MCS) in precipitation-moisture interactions are examined using 19 years of satellite observations. When CSF is below ~0.5, non-deep convection dominates total rainfall, and predominantly contributes to moistening of the environment. Between the CSF range of 0.5–0.7, transition to deep convective rainfall begins. Meanwhile, MCS contribution to total rain rapidly increases, and the environment is further moistened. MCS becomes the major rainfall type above the critical CSF value (~0.7), with the rapid increase of total rain mostly explained by the rapid increase in MCS rain area. Rainfall reduction at high CSF values is jointly contributed by MCS and non-deep convection.

58 GEOSCIENCES↗
DOE OSTI2022

The Influence of Shallow Cloud Populations on Transitions to Deep Convection in the Amazon

Abstract In this study, a pair of convection-permitting (2-km grid spacing), month-long, wet-season Weather Research and Forecasting (WRF) Model simulations with and without the eddy-diffusivity mass-flux (EDMF) scheme are performed for a portion of the Green Ocean Amazon (GoAmazon) 2014/15 field campaign period. EDMF produces an ensemble of subgrid-scale convective plumes that evolve in response to the boundary layer meteorological conditions and can develop into shallow clouds. The objective of this study is to determine how different treatments of shallow cumulus clouds (i.e., with and without EDMF) impact the total cloud population and precipitation across the Amazonian rain forest, with emphasis on impacts on the likelihood of shallow-to-deep convection transitions. Results indicate that the large-scale synoptic conditions in the EDMF and control simulations are nearly identical; however, on the local scale their rainfall patterns diverge drastically and the biases decrease in EDMF. The EDMF scheme significantly increases the frequency of shallow clouds, but the frequencies of deep clouds are similar between the simulations. Deep convective clouds are tracked using a cloud-tracking algorithm to examine the impact of shallow cumulus on the surrounding ambient environment where deep convective clouds initiate. Results suggest that a rapid increase of low-level cloudiness acts to cool and moisten the low to midtroposphere during the day, favoring the transition to deep convection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Mesoscale Convective Systems in a Superparameterized E3SM Simulation at High Resolution

Accurately representing mesoscale convective systems (MCSs) is crucial to simulating the energy and water cycles in global climate models. Using a novel MCS identification and tracking algorithm applied to observations and model simulations, we evaluate how well the Energy Exascale Earth System Model simulates MCSs over the central US. Simulations performed by E3SM at 25 km grid spacing with (SP-E3SM) and without (E3SM) superparameterization are compared and evaluated against observations using multiple metrics highlighting important MCS characteristics. Compared to E3SM, SP-E3SM better simulates MCS number and MCS precipitation amount, diurnal cycle, propagation, and the probability distribution of precipitation rate in both spring and summer. The improvement from SP is partly contributed by improvement in simulating the large-scale environments, featuring enhanced atmospheric low-level moisture and larger moisture transport to the central US relative to E3SM. However, SP-E3SM still underestimates MCS precipitation amount, particularly in summer. This underestimation is closely related to the negative bias in MCS precipitation intensity, although the drier environments simulated during summer also contributes to underestimation of MCS frequency. Without SP, the larger bias in MCS precipitation amount is closely related to the negative bias in MCS frequency, while the substantial dry bias in the large-scale environments also contributes to underestimation of MCS intensity. Our results suggest that SP improves MCS simulation by improving modeling of the large-scale environments and convection initiation, which are both major limiting factors in E3SM even at 25 km grid spacing where deep convection is represented by a cumulus parameterization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Representations of Precipitation Diurnal Cycle in the Amazon as Simulated by Observationally Constrained Cloud‐System Resolving and Global Climate Models

Abstract The ability of an observationally‐constrained cloud‐system resolving model (Weather Research and Forecasting; WRF, 4‐km grid spacing) and a global climate model (Energy Exascale Earth System Model; E3SM, 1‐degree grid spacing) to represent the precipitation diurnal cycle over the Amazon basin during the 2014 wet season is assessed. The WRF model coupled with a 3‐D variational data assimilation scheme reproduces the spatial variability of the precipitation diurnal cycle over the basin and the lifecycle of westward propagating MCSs initiated by the coastal sea‐breeze front. In contrast, a single morning peak in rainfall is produced by E3SM for simulations despite the nudging of large‐scale winds toward global reanalysis, indicating precipitation in E3SM is largely controlled by local convection associated with diurnal heating. The role of propagating MCS on the environment are discussed by using a multivariate perturbation analysis. We also find that the advection of moisture perturbations from ocean to inland regions have a higher correlation with the occurrence of MCSs in the Amazon than the intensity of colder air intrusion associated with sea breezes along the coast. Moreover, the presence of large cold pools over the central Amazon basin are responsible for the maintenance of propagating deep convection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Quantifying physical parameterization uncertainties associated with land-atmosphere interactions in the WRF model over Amazon

The Weather Research and Forecasting (WRF) model can be used to diagnose regional land-atmosphere (L-A) coupling strength in the absence of sufficient observations but subjected to uncertainties associated with model physical parameterizations. In this study, we propose a framework to quantify and reduce model physical parameterization uncertainties associated with surface fluxes and L-A coupling. An ensemble of WRF simulations with different physical schemes is used to simulate surface fluxes and land-atmosphere coupling strength over the Amazon region. The physical parameterizations investigated include cloud microphysics (MP), land surface processes (LSM), planetary boundary layer (PBL), surface layer (SL), and cumulus (CU). We perform 120 ensemble simulations using the WRF model and different combinations of six MPs, three LSMs, six PBLs and SLs and three CUs. The measurements from the GoAMAZON field campaign and satellite data are used to evaluate model performance. A Multi-way analysis of variance (ANOVA) approach is applied to quantify the relative importance of different physics processes on L-A coupling. The Tukey’s test is used to sort schemes that have no significant differences into one group. The suite of physics that result in the best simulations of the corresponding variables are selected based on the Taylor skill score. Results show that the relative importance of processes and their interaction vary with the variables of interest. For example, CU was the most important process in modulating soil moisture, 2 m-humidity, latent heat, and net radiation. LSM showed dominant effects on 2 m-temperature and also has the largest impact on sensible heat and the lifting condensation level. The best physical parameterization ensembles show much narrower ranges of the variables of interest than the priori ensemble. Results of this study show the roles of different physical processes in modulating L-A interactions, quantify model uncertainties from physical processes, and provide insights for improving the model physics parameterizations.

Wang, Chen↗
DOE OSTI2021

Impact of a New Cloud Microphysics Parameterization on the Simulations of Mesoscale Convective Systems in E3SM

Abstract Mesoscale convective systems (MCSs) are one of the most climatically significant forms of convection because of their large role in water and energy cycles. The mesoscale features associated with MCS are difficult to represent in climate models because the relevant dynamics and physics are absent or poorly represented with coarse model resolution (∼100 km). Using a regionally refined model (RRM) with 0.25° grid spacing embedded in the Energy Exascale Earth System Model (E3SM), we explore the impact of cloud microphysics parameterizations on the simulation of precipitation, particularly MCS precipitation over the contiguous United States. The Predicted Particle Properties (P3) cloud microphysics scheme has been modified and implemented into E3SM to overcome the limitations of the default Morrison and Gettelman (MG2) scheme in which rimed precipitating ice particles (graupel/hail) are absent and frozen particles are artificially partitioned into cloud ice and snow. We show that P3 improves the simulation of precipitation statistics including frequency distribution compared with MG2 with a limited effect on the diurnal cycle. P3 predicts higher hourly rain rates, resulting in 20% more MCSs and a higher total MCS precipitation (4.4%) compared to MG2, agreeing better with observations. The improvements with P3 mainly result from improved representations of ice microphysics, which not only produces higher rain rates through melting but also leads to a stronger large‐scale ascending motion by releasing more latent heating. This study suggests that improving microphysics parameterization is important for simulating MCS precipitation as future climate model resolutions continue to increase.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Early warm-season mesoscale convective systems dominate soil moisture–precipitation feedback for summer rainfall in central United States

Land–atmosphere interactions play an important role in summer rainfall in the central United States, where mesoscale convective systems (MCSs) contribute to 30 to 70% of warm-season precipitation. Previous studies of soil moisture–precipitation feedbacks focused on the total precipitation, confounding the distinct roles of rainfall from different convective storm types. Here, we investigate the soil moisture–precipitation feedbacks associated with MCS and non-MCS rainfall and their surface hydrological footprints using a unique combination of these rainfall events in observations and land surface simulations with numerical tracers to quantify soil moisture sourced from MCS and non-MCS rainfall. Furthermore, we find that early warm-season (April to June) MCS rainfall, which is characterized by higher intensity and larger area per storm, produces coherent mesoscale spatial heterogeneity in soil moisture that is important for initiating summer (July) afternoon rainfall dominated by non-MCS events. On the other hand, soil moisture sourced from both early warm-season MCS and non-MCS rainfall contributes to lower-level atmospheric moistening favorable for upscale growth of MCSs at night. However, soil moisture sourced from MCS rainfall contributes to July MCS rainfall with a longer lead time because with higher intensity, MCS rainfall percolates into deeper soil that has a longer memory. Therefore, early warm-season MCS rainfall dominates soil moisture–precipitation feedback. This motivates future studies to examine the contribution of early warm-season MCS rainfall and associated soil moisture anomalies to predictability of summer rainfall in the major agricultural region of the central United States and other continental regions frequented by MCSs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Simple Lagrangian Parcel Model for the Initiation of Summer-time Mesoscale Convective Systems over the Central United States

Mesoscale convective systems (MCSs) account for more than 50% of summertime precipitation over the central United States and have a significant impact on local weather and hydrologic cycle. It is hypothesized that the inadequate treatment of MCSs is responsible for the long-standing warm and dry bias over the central United States in coarse-resolution general circulation model (GCM) simulations. In particular, a better understanding of MCS initiation is still lacking. Here a single-column Lagrangian parcel model is first developed to simulate the basic features of a rising parcel. This simple model demonstrates the collective effects of boundary layer moistening and dynamical lifting in triggering convective initiation and reproduces successfully its early afternoon peak with surface equivalent potential temperature as a controlling factor. It also predicts that convection is harder to trigger in the future climate under global warming, consistent with the results from convection-permitting regional climate simulations. Then, a multicolumn model that includes an array of single-column models aligned in the east–west direction and incorporates idealized cold pool interaction mechanisms is developed. The multicolumn model captures readily the cold pool–induced upscale growth feature in MCS genesis from initially scattered convection that is organized into a mesoscale cluster in a few hours. It also highlights the crucial role of lifting effects due to cold pool collision and spreading, subsidence effect, and gust front propagation speed in controlling the final size of mesoscale clusters and cold pool regions. This simple model should be useful for understanding fundamental mechanisms of MCS initiation and providing guidance for improving MCS simulations in GCMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Growth of Mesoscale Convective Systems in Observations and a Seasonal Convection-Permitting Simulation over Argentina

Abstract A 6.5-month, convection-permitting simulation is conducted over Argentina covering the Remote Sensing of Electrification, Lightning, And Mesoscale/Microscale Processes with Adaptive Ground Observations and Clouds, Aerosols, and Complex Terrain Interactions (RELAMPAGO-CACTI) field campaign and is compared with observations to evaluate mesoscale convective system (MCS) growth prediction. Observed and simulated MCSs are consistently identified, tracked, and separated into growth, mature, and decay stages using top-of-the-atmosphere infrared brightness temperature and surface rainfall. Simulated MCS number, lifetime, seasonal and diurnal cycles, and various cloud-shield characteristics including growth rate are similar to those observed. However, the simulation produces smaller rainfall areas, greater proportions of heavy rainfall, and faster system propagations. Rainfall area is significantly underestimated for long-lived MCSs but not for shorter-lived MCSs, and rain rates are always overestimated. These differences result from a combination of model and satellite retrieval biases, in which simulated MCS rain rates are shifted from light to heavy, while satellite-retrieved rainfall is too frequent relative to rain gauge estimates. However, the simulation reproduces satellite-retrieved MCS cloud-shield evolution well, supporting its usage to examine environmental controls on MCS growth. MCS initiation locations are associated with removal of convective inhibition more than maximized low-level moisture convergence or instability. Rapid growth is associated with a stronger upper-level jet (ULJ) and a deeper northwestern Argentinean low that causes a stronger northerly low-level jet (LLJ), increasing heat and moisture fluxes, low-level vertical wind shear, baroclinicity, and instability. Sustained growth corresponds to similar LLJ, baroclinicity, and instability conditions but is less sensitive to the ULJ, large-scale vertical motion, or low-level shear. Growth sustenance controls MCS maximum extent more than growth rate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Mesoscale Convective Systems Dominate the Energetics of the South Asian Summer Monsoon Onset

The onset of the South Asian summer monsoon (SASM) is featured as an abrupt increase of precipitation and atmospheric column-integrated moist static energy (MSE). Using convection permitting simulations, a novel cloud tracking technique, and an MSE budget, the relative roles of mesoscale convective systems (MCSs) and non-MCS isolated deep convection in the SASM onset are studied. The analysis shows MCSs play a crucial role in the sudden increases of rainfall, diabatic MSE sources, and the subsequent enhanced export of column-integrated MSE during the onset. A “diabatic sources-energy export” plane analysis delineates the different roles of MCSs and non-MCS deep convection in the SASM onset. Although deep convection always leads to a net energy export, mesoscale organization of deep convection dominates the convection associated positive feedbacks that accelerate the energy cycle of the SASM onset. Sensitivity experiment shows that the results are insensitive to the model resolutions.

Chen, Xingchao↗