Engineering topics
Feng, Wei
Publications and source records attributed to Feng, Wei.
China’s Trajectories beyond Efficiency: CO 2 Implications of Maximizing Electrification and Renewable Resources through 2050
In support of the Paris Agreement, China committed to peak its CO 2 emissions by 2030 or earlier and to reduce its CO 2 intensity by 60-65% from 2005 levels by 2030. While energy efficiency will continue to play a major role, other significant actions in China beyond efficiency are needed to help limit the average global temperature increase to 1.5°C. This study uses a bottom-up national end-use model to evaluate even lower CO 2 emissions pathways for China beyond cost-effective efficiency by maximizing end-use electrification and adoption of new renewable resources. Unlike most recent modelling studies that only focus on renewable electricity generation with simplified projections for future electricity demand growth, this study evaluates maximum electrification for specific end-use sectors and non-conventional renewable resources on the demand-side. We use scenario analysis to evaluate the potential CO 2 reductions if China is able to rapidly decarbonize its power sector while maximizing electrification across all sectors and the additional opportunity from maximizing biomass and low temperature renewable heat use in industry and solar heating, cooling and water heating technologies use in buildings. While already widely used in some European countries, large-scale adoption of these non-conventional technologies have not yet been considered in China. We find that maximizing non-conventional electric and renewable technologies can help China peak its national CO 2 emissions as early as 2023, with significant additional CO 2 emission reductions through 2050. The greatest additional CO 2 reduction potential beyond efficiency lies in fossil fuel displaced by renewable heat in industry. These results suggest accelerating the utilization of non-conventional electric and renewable technologies present additional CO 2 reduction opportunities for China, but new policies and strategies are needed to change technology choice in the demand sectors.
Aggregation‐Induced Multilength Scaled Morphology Enabling 11.76% Efficiency in All‐Polymer Solar Cells Using Printing Fabrication
Abstract All‐polymer solar cells (all‐PSCs) exhibit excellent stability and readily tunable ink viscosity, and are therefore especially suitable for printing preparation of large‐scale devices. At present, the efficiency of state‐of‐the‐art all‐PSCs fabricated by the spin‐coating method has exceeded 11%, laying the foundation for the preparation and practical utilization of printed devices. A high power conversion efficiency (PCE) of 11.76% is achieved based on PTzBI‐Si:N2200 all‐PSCs processing with 2‐methyltetrahydrofuran (MTHF, an environmentally friendly solvent) and preparation of active layers by slot die printing, which is the top efficient for all‐PSCs. Conversely, the PCE of devices processed by high‐boiling point chlorobenzene is less than 2%. Through the study of film formation kinetics, volatile solvents can freeze the morphology in a short time, and a more rigid conformation with strong intermolecular interaction combined with the solubility limit of PTzBI‐Si and N2200 in MTHF results in the formation of a fibril network in the bulk heterojunction. The multilength scaled morphology ensures fast transfer of carriers and facilitates exciton separation, which boosts carrier mobility and current density, thus improving the device performance. These results are of great significance for large‐scale printing fabrication of high‐efficiency all‐PSCs in the future.
Preliminary experimental comparison and feasibility analysis of CO2/R134a mixture in Organic Rankine Cycle for waste heat recovery from diesel engines
This paper presents results of a preliminary experimental study of the Organic Rankine Cycle (ORC) using CO2/R134a mixture based on an expansion valve. The goal of the research was to examine the feasibility and effectiveness of using CO 2 mixtures to improve system performance and expand the range of condensation temperature for ORC system. The mixture of CO 2 /R134a (0.6/0.4) on a mass basis was selected for comparison with pure CO 2 in both the preheating ORC (P-ORC) and the preheating regenerative ORC (PR-ORC). Then, the feasibility and application potential of CO 2 /R134a (0.6/0.4) mixture for waste heat recovery from engines was tested under ambient cooling conditions. Preliminary experimental results using an expansion valve indicate that CO 2 /R134a (0.6/0.4) mixture exhibits better system performance than pure CO 2 . For PR-ORC using CO 2 /R134a (0.6/0.4) mixture, assuming a turbine isentropic efficiency of 0.7, the net power output estimation, thermal efficiency and exergy efficiency reached up to 5.30 kW, 10.14% and 24.34%, respectively. For the fitting value at an expansion inlet pressure of 10 MPa, the net power output estimation, thermal efficiency and exergy efficiency using CO2/R134a (0.6/0.4) mixture achieved increases of 23.3%, 16.4% and 23.7%, respectively, versus results using pure CO2 as the working fluid. Finally, experiments showed that the ORC system using CO2/R134a (0.6/0.4) mixture is capable of operating stably under ambient cooling conditions (25.2-31.5 °C), demonstrating that CO 2 /R134a mixture can expand the range of condensation temperature and alleviate the low-temperature condensation issue encountered with CO 2 . Under the ambient cooling source, it is expected that ORC using CO 2 /R134a (0.6/0.4) mixture will improve the thermal efficiency of a diesel engine by 1.9%.
Cooling load forecasting-based predictive optimisation for chiller plants
Extensive electric power is required to maintain indoor thermal comfort using heating, ventilation and air conditioning (HVAC) systems, of which, water-cooled chiller plants consume more than 50% of the total electric power. To improve energy efficiency, supervisory optimisation control can be adopted. The controlled variables are usually optimised according to instant building cooling load and ambient wet bulb air temperature at regular time intervals. In this way, the energy efficiency of chiller plants has been improved. However, with an inherent assumption that the instant building cooling load and ambient wet bulb temperature remain constant in the coming time interval, the energy efficiency potential has not been fully realised, especially when cooling loads vary suddenly and extremely. To solve this problem, a cooling load forecasting-based predictive optimisation method is proposed. Rather than minimising the instant system power according to the instant building cooling load and ambient wet bulb temperature, the controlled variables are derived to minimise the sum of the instant system power and one-time-step-ahead future system power according to both instant and forecasted future building cooling loads. With this method, the energy efficiency potential of a chiller plant can be further improved without shortening the operation time interval. 80% redundant energy consumption has been reduced for the sample chiller plant; energy can be saved for chiller plants that work for years. The evaluation on the effect of cooling load forecasting accuracy turns out that the more accurate the forecasts are, the more redundant energy consumption can be reduced.
Hot Deformation Characteristics and Processing Map of FV520B Martensitic Precipitation-Hardened Stainless Steel
Hot deformation characteristics of FV520B martensitic precipitation-hardened stainless steel were investigated in the temperature range of 850-1150 °C and strain rate range of 0.005-0.5 s{sup −1} with true strain 0.8 by using Gleeble-3500 thermo-mechanical simulator. Critical stress and corresponding critical strain for dynamic recrystallization initiation were calculated. The constitutive equation was developed by employing Arrhenius constitutive model to represent the nonlinear relationship of true stress and deformation parameters including temperature, strain rate and strain. The correlation coefficient and average absolute relative error are 0.9979 and 2.225%, which indicates the good predictive accuracy of the established constitutive equations. Processing maps were constructed at different plastic strains levels based on dynamic material model (DMM) and established constitutive equation. Combining the processing map with microstructure, the optimum region for good workability is designated as the temperature range of 1050-1125 °C and strain rate range of 0.027-0.23 s{sup −1} with peak efficiency of 0.32. Homogeneous fine and equiaxed dynamic recrystallization (DRX) grains can be found in this optimum according to the microstructure metallographic pictures.
A roadmap for China to peak carbon dioxide emissions and achieve a 20% share of non-fossil fuels in primary energy by 2030
As part of its Paris Agreement commitment, China pledged to peak carbon dioxide (CO 2 ) emissions around 2030, striving to peak earlier, and to increase the non-fossil share of primary energy to 20% by 2030. Yet by the end of 2017, China emitted 28% of the world's energy-related CO 2 emissions, 76% of which were from coal use. How China can reinvent its energy economy cost-effectively while still achieving its commitments was the focus of a three-year joint research project completed in September 2016. Overall, this analysis found that if China follows a pathway in which it aggressively adopts all cost-effective energy efficiency and CO 2 emission reduction technologies while also aggressively moving away from fossil fuels to renewable and other non-fossil resources, it is possible to not only meet its Paris Agreement Nationally Determined Contribution (NDC) commitments, but also to reduce its 2050 CO 2 emissions to a level that is 42% below the country's 2010 CO 2 emissions. While numerous barriers exist that will need to be addressed through effective policies and programs in order to realize these potential energy use and emissions reductions, there are also significant local environmental (e.g., air quality), national and global environmental (e.g., mitigation of climate change), human health, and other unquantified benefits that will be realized if this pathway is pursued in China.
Urban-scale building energy consumption database: a case study for Wuhan, China
Building energy consumption accounts for 30% of the overall energy end use worldwide. This number is even much higher in urban areas. With rapid urbanization in China, cities are expanding with new constructions. It is essential to create an updated urban-scale building energy consumption database to represent energy use for different types of buildings in China, which could help urban planners, managers and decision makers to understand temporal and spatial building energy consumption distribution and ensure required electricity and/or gas supply. However, such urban-scale database is rarely found in China. This paper creates baseline EnergyPlus models for residential, small office and large office buildings and validates the baseline models using survey data from literature. Parametric simulations are conducted to consider different design factors, such as building enclosure, lighting power density, equipment power density, HVAC schedule, etc. In total 351 EnergyPlus models are generated to cover different energy use intensity scenarios. Data-driven regression analysis is conducted to predict building energy consumption using building price/rent. The prediction results are expected to provide design decision support for urban planning and power distribution for new constructions.
Moore vs. Murphy: Tradeoffs between complexity and reliability in distributed energy system scheduling using software-as-a-service
Software-based optimization of building control strategies, including scheduling, has the potential to improve the performance of existing complex heating, ventilation, and air conditioning (HVAC), storage, and other systems—especially if temporally variable energy production, such as solar thermal or photovoltaics, is included. If reductions in energy bills can be achieved using optimized control strategies that take advantage of cost-saving opportunities, such as time-of-use pricing, the additional bill savings can cover further efficiency investment costs. As computer processing becomes cheaper over time (Moore's Law), opportunities to perform complex control optimization become more abundant, and these can be performed remotely as software-as-a-service (SaaS). However, by “perfecting” our control strategies, we run an increased risk that when something unexpected happens (Murphy's Law), the consequences of failure are greater. This study used simulation to explore the potential benefits of HVAC schedule optimization, delivery, and implementation using a SaaS paradigm, at various levels of complexity. Implementing optimal schedules in a model of an efficient building's HVAC system, the study predicts energy cost savings of up to 10% compared to the naïve reference control strategy. Optimizing more system control variables increases the potential energy cost savings; however, these savings could be compromised by failures in communication inherent in delivering schedules via SaaS. The additional cost of energy resulting from the risk of increased demand charges generally increased with increased communication failure to a much larger extent than the risk of increased energy use charges. This work suggests that moderate improvements in performance, achieved at low cost by simple means, may be more effective than highly optimized schemes, which are more susceptible to failure due to their dependence on complex interactions between systems.
Suppression of Arabidopsis GGLT 1 affects growth by reducing the L‐galactose content and borate cross‐linking of rhamnogalacturonan‐ II
Summary Boron is a micronutrient that is required for the normal growth and development of vascular plants, but its precise functions remain a subject of debate. One established role for boron is in the cell wall where it forms a diester cross‐link between two monomers of the low‐abundance pectic polysaccharide rhamnogalacturonan‐ II ( RG ‐ II ). The inability of RG ‐ II to properly assemble into a dimer results in the formation of cell walls with abnormal biochemical and biomechanical properties and has a severe impact on plant productivity. Here we describe the effects on RG ‐ II structure and cross‐linking and on the growth of plants in which the expression of a GDP ‐sugar transporter ( GONST 3/ GGLT 1) has been reduced. In the GGLT 1 ‐silenced plants the amount of L‐galactose in side‐chain A of RG ‐ II is reduced by up to 50%. This leads to a reduction in the extent of RG ‐ II cross‐linking in the cell walls as well as a reduction in the stability of the dimer in the presence of calcium chelators. The silenced plants have a dwarf phenotype, which is rescued by growth in the presence of increased amounts of boric acid. Similar to the mur1 mutant, which also disrupts RG ‐ II cross‐linking, GGLT 1 ‐silenced plants display a loss of cell wall integrity under salt stress. We conclude that GGLT 1 is probably the primary Golgi GDP ‐L‐galactose transporter, and provides GDP ‐L‐galactose for RG ‐ II biosynthesis. We propose that the L‐galactose residue is critical for RG ‐ II dimerization and for the stability of the borate cross‐link.
Ropivacaine impairs mitochondrial biogenesis by reducing PGC-1α
Highlights: • Ropivacaine inhibits the expressions of PGC-1α, NRF-1, and TFAM in M17 cells. • Ropivacaine impairs mitochondrial biogenesis and causes mitochondrial malfunction. • Ropivacaine-induced reduction of PGC-1α requires the inactivation of CREB. • PGC-1α rescues Ropivacaine-caused impairment of mitochondrial biogenesis. Ropivacaine is one of the commonly used local anesthetics in medical and dental care. However, preclinical and observational studies indicate that ropivacaine could have substantial side effects including neurotoxicity, which has raised concern regarding the safety of this drug. In the present study, we investigated the effects of clinically relevant doses of ropivacaine on mitochondrial biogenesis and function in neuronal cells. Our data indicate that exposure to ropivacaine leads to reduced expression of the major mitochondrial regulator PGC-1α and its downstream transcription factors NRF1 and TFAM. Ropivacaine treatment induces impairment of mitochondrial biogenesis by reducing mitochondrial mass, the ratio of mtDNA to nDNA (mtDNA/nDNA), cytochrome C oxidase activity, and COX-1 expression. Additionally, treatment with ropivacaine causes “loss of mitochondrial function” by impairing the mitochondrial respiratory rate and ATP production. Mechanistically, the reduction of PGC-1α caused by ropivacaine exposure requires inactivation of CREB, while re-introduction of PGC-1α completely rescues ropivacaine-induced mitochondrial abnormalities. In summary, our results provide supporting evidence that mitochondrial impairment is a key event in ropivacaine-mediated neurotoxicity, and the reduction of PGC-1α and its downstream signals are likely the molecular mechanism behind its cellular toxicity.
Scenarios of energy efficiency and CO 2 emissions reduction potential in the buildings sector in China to year 2050
As China’s rapid urbanization continues and urban dwellers become more affluent, energy use in buildings is expected to grow. To understand how this growth can be slowed, here we explore four scenarios for Chinese buildings, ranging from a high-energy-demand scenario with no new energy policies to lowest energy demand under a techno-economic-potential scenario that assumes full deployment of cost-effective efficient and renewable technologies by 2050. We show that, in the high energy demand scenario, building energy demand has an average annual growth rate of about 2.8%, with slower growth rates in the other three scenarios. In all scenarios, CO 2 emissions grow slower than energy, with building CO 2 peaking around 2045 in the high energy demand scenario, and as early as 2030 in the techno-economic-potential scenario. We show that although various technological solutions, systems and practices can be very effective in minimizing building energy use, rigorous policies are needed to overcome multiple implementation barriers.
Cascade energy optimization for waste heat recovery in distributed energy systems
The efficiency of distributed energy systems can be significantly increased through waste heat recovery from industry or power generation. The technologies used for this process are typically dependent on the quality and temperature grades of waste heat. To maximize the efficiency of cascade heat utilization, it is important to optimize the choice of waste heat recovery technologies and their operation. Here, a detailed mixed integer linear programming optimization model is proposed for waste heat recovery in a district-scale microgrid. The model can distinguish waste heat quality for planning and operation optimization of distributed energy systems. Heat utilization technologies are formulated in this developed model and categorized in different temperature grades. The developed model is validated using four typical cases under different settings of system operation and business models. It is found that the optimization model, by distinguishing waste heat temperature, can increase energy cost savings by around 5%, compared to models that do not consider waste heat temperature grades. Additionally, the results indicate that the developed model can provide more realistic configuration and technologies dispatch.
A molecular model for LINC complex regulation: activation of SUN2 for KASH binding
Linkers of the nucleoskeleton and cytoskeleton are key molecular complexes that span the nuclear envelope (NE) and provide a direct linkage between the nucleoskeleton and cytoskeleton. Two major components of these complexes are members of the SUN and KASH protein families that interact in the perinuclear space to allow the transmission of mechanochemical signals across the NE. Structural details of the mammalian SUN domain protein SUN2 have established that SUN2 must form a trimer to bind to KASH, and that this trimerization is mediated through two predicted coiled-coil regions of the protein, CC1 and CC2, which precede the SUN domain. Recent crystallographic data suggest that CC2-SUN formed an unexpected autoinhibited monomer unable to bind to KASH. These structural insights raise the question of how full-length SUN2 transitions from a monomer to a trimer inside the NE. In this study we used a computational approach to model a fragment of SUN2 containing CC1, CC2, and the SUN domain. We observed the dynamics of these modeled structures using ~1 μs molecular dynamics simulations and showed that the interplay between CC1 and CC2 may be sufficient for the release of CC2-SUN2 from its autoinhibited state. Additionally, using our models and gel filtration analysis, we show the involvement of an E452 residue on CC1 in the monomer–trimer transition of SUN2. Intriguingly, mutations in this residue have been seen in muscular dystrophy–associated SUN2 variants. Finally, we propose a Ca 2+ -dependent monomer–trimer transition of SUN2.
A review of microgrid development in the United States – A decade of progress on policies, demonstrations, controls, and software tools
Microgrids have become increasingly popular in the United States. Supported by favorable federal and local policies, microgrid projects can provide greater energy stability and resilience within a project site or community. Here, we review major federal, state, and utility-level policies driving microgrid development in the United States. Representative U.S. demonstration projects are selected and their technical characteristics and non-technical features are introduced. The paper discusses trends in the technology development of microgrid systems as well as microgrid control methods and interactions within the electricity market. Software tools for microgrid design, planning, and performance analysis are illustrated with each tool's core capability. Finally, the paper summarizes the successes and lessons learned during the recent expansion of the U.S. microgrid industry that may serve as a reference for other countries developing their own microgrid industries.
Microgrid to enable optimal distributed energy retail and end-user demand response
In the face of unprecedented challenges in environmental sustainability and grid resilience, there is an increasingly held consensus regarding the adoption of distributed and renewable energy resources such as microgrids (MGs), and the utilization of flexible electric loads by demand response (DR) to potentially drive a necessary paradigm shift in energy production and consumption patterns. However, the potential value of distributed generation and demand flexibility has not yet been fully realized in the operation of MGs. This study investigates the pricing and operation strategy with DR for a MG retailer in an integrated energy system (IES). Based on co-optimizing retail rates and MG dispatch formulated as a mixed integer quadratic programming (MIQP) problem, our model devises a dynamic pricing scheme that reflects the cost of generation and promotes DR, in tandem with an optimal dispatch plan that exploits spark spread and facilitates the integration of renewables, resulting in improved retailer profits and system stability. Main issues like integrated energy coupling and customer bill reduction are addressed during pricing to ensure rates competitiveness and customer protection. By evaluating on real datasets, the system is demonstrated to optimally coordinate storage, renewables, and combined heat and power (CHP), reduce carbon dioxide emission while maintaining profits, and effectively alleviate the PV curtailment problem. Finally, the model can be used by retailers and MG operators to optimize their operations, as well as regulators to design new utility rates in support of the ongoing transformation of energy systems.
Intrinsic Two-Dimensional Ferroelectricity with Dipole Locking
Out-of-plane ferroelectricity with a high transition temperature in ultrathin films is important for the exploration of new domain physics and scaling down of memory devices. However, depolarizing electrostatic fields and interfacial chemical bonds can destroy this long-range polar order at two-dimensional (2D) limit. In this paper we report the experimental discovery of the locking between out-of-plane dipoles and in-plane lattice asymmetry in atomically thin In 2 Se 3 crystals, a new stabilization mechanism leading to our observation of intrinsic 2D out-of-plane ferroelectricity. Through second harmonic generation spectroscopy and piezoresponse force microscopy, we found switching of out-of-plane electric polarization requires a flip of nonlinear optical polarization that corresponds to the inversion of in-plane lattice orientation. The polar order shows a very high transition temperature (~700Κ) without the assistance of extrinsic screening. This finding of intrinsic 2D ferroelectricity resulting from dipole locking opens up possibilities to explore 2D multiferroic physics and develop ultrahigh density memory devices.